Sharp Microelectronics 10.1" WQXGA TFT LCD panel
|
|
This panel requires a dual-channel DSI host to operate. It supports two modes:
|
- left-right: each channel drives the left or right half of the screen
|
- even-odd: each channel drives the even or odd lines of the screen
|
|
Each of the DSI channels controls a separate DSI peripheral. The peripheral
|
driven by the first link (DSI-LINK1), left or even, is considered the primary
|
peripheral and controls the device. The 'link2' property contains a phandle
|
to the peripheral driven by the second link (DSI-LINK2, right or odd).
|
|
Note that in video mode the DSI-LINK1 interface always provides the left/even
|
pixels and DSI-LINK2 always provides the right/odd pixels. In command mode it
|
is possible to program either link to drive the left/even or right/odd pixels
|
but for the sake of consistency this binding assumes that the same assignment
|
is chosen as for video mode.
|
|
Required properties:
|
- compatible: should be "sharp,lq101r1sx01"
|
- reg: DSI virtual channel of the peripheral
|
|
Required properties (for DSI-LINK1 only):
|
- link2: phandle to the DSI peripheral on the secondary link. Note that the
|
presence of this property marks the containing node as DSI-LINK1.
|
- power-supply: phandle of the regulator that provides the supply voltage
|
|
Optional properties (for DSI-LINK1 only):
|
- backlight: phandle of the backlight device attached to the panel
|
|
Example:
|
|
dsi@54300000 {
|
panel: panel@0 {
|
compatible = "sharp,lq101r1sx01";
|
reg = <0>;
|
|
link2 = <&secondary>;
|
|
power-supply = <...>;
|
backlight = <...>;
|
};
|
};
|
|
dsi@54400000 {
|
secondary: panel@0 {
|
compatible = "sharp,lq101r1sx01";
|
reg = <0>;
|
};
|
};
|
