Samsung S6E8AA0 AMOLED LCD 5.3 inch panel
|
|
Required properties:
|
- compatible: "samsung,s6e8aa0"
|
- reg: the virtual channel number of a DSI peripheral
|
- vdd3-supply: core voltage supply
|
- vci-supply: voltage supply for analog circuits
|
- reset-gpios: a GPIO spec for the reset pin
|
- display-timings: timings for the connected panel as described by [1]
|
|
Optional properties:
|
- power-on-delay: delay after turning regulators on [ms]
|
- reset-delay: delay after reset sequence [ms]
|
- init-delay: delay after initialization sequence [ms]
|
- panel-width-mm: physical panel width [mm]
|
- panel-height-mm: physical panel height [mm]
|
- flip-horizontal: boolean to flip image horizontally
|
- flip-vertical: boolean to flip image vertically
|
|
The device node can contain one 'port' child node with one child
|
'endpoint' node, according to the bindings defined in [2]. This
|
node should describe panel's video bus.
|
|
[1]: Documentation/devicetree/bindings/display/panel/display-timing.txt
|
[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
|
|
Example:
|
|
panel {
|
compatible = "samsung,s6e8aa0";
|
reg = <0>;
|
vdd3-supply = <&vcclcd_reg>;
|
vci-supply = <&vlcd_reg>;
|
reset-gpios = <&gpy4 5 0>;
|
power-on-delay= <50>;
|
reset-delay = <100>;
|
init-delay = <100>;
|
panel-width-mm = <58>;
|
panel-height-mm = <103>;
|
flip-horizontal;
|
flip-vertical;
|
|
display-timings {
|
timing0: timing-0 {
|
clock-frequency = <57153600>;
|
hactive = <720>;
|
vactive = <1280>;
|
hfront-porch = <5>;
|
hback-porch = <5>;
|
hsync-len = <5>;
|
vfront-porch = <13>;
|
vback-porch = <1>;
|
vsync-len = <2>;
|
};
|
};
|
};
|
