Device-Tree bindings for Samsung Exynos SoC display controller (DECON)
|
|
DECON (Display and Enhancement Controller) is the Display Controller for the
|
Exynos series of SoCs which transfers the image data from a video memory
|
buffer to an external LCD interface.
|
|
Required properties:
|
- compatible: value should be one of:
|
"samsung,exynos5433-decon", "samsung,exynos5433-decon-tv";
|
- reg: physical base address and length of the DECON registers set.
|
- interrupt-names: should contain the interrupt names depending on mode of work:
|
video mode: "vsync",
|
command mode: "lcd_sys",
|
command mode with software trigger: "lcd_sys", "te".
|
- interrupts or interrupts-extended: list of interrupt specifiers corresponding
|
to names privided in interrupt-names, as described in
|
interrupt-controller/interrupts.txt
|
- clocks: must include clock specifiers corresponding to entries in the
|
clock-names property.
|
- clock-names: list of clock names sorted in the same order as the clocks
|
property. Must contain "pclk", "aclk_decon", "aclk_smmu_decon0x",
|
"aclk_xiu_decon0x", "pclk_smmu_decon0x", "aclk_smmu_decon1x",
|
"aclk_xiu_decon1x", "pclk_smmu_decon1x", clk_decon_vclk",
|
"sclk_decon_eclk"
|
- ports: contains a port which is connected to mic node. address-cells and
|
size-cells must 1 and 0, respectively.
|
- port: contains an endpoint node which is connected to the endpoint in the mic
|
node. The reg value muset be 0.
|
|
Example:
|
SoC specific DT entry:
|
decon: decon@13800000 {
|
compatible = "samsung,exynos5433-decon";
|
reg = <0x13800000 0x2104>;
|
clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
|
<&cmu_disp CLK_ACLK_XIU_DECON0X>,
|
<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
|
<&cmu_disp CLK_ACLK_SMMU_DECON1X>,
|
<&cmu_disp CLK_ACLK_XIU_DECON1X>,
|
<&cmu_disp CLK_PCLK_SMMU_DECON1X>,
|
<&cmu_disp CLK_SCLK_DECON_VCLK>,
|
<&cmu_disp CLK_SCLK_DECON_ECLK>;
|
clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
|
"pclk_smmu_decon0x", "aclk_smmu_decon1x", "aclk_xiu_decon1x",
|
"pclk_smmu_decon1x", "sclk_decon_vclk", "sclk_decon_eclk";
|
interrupt-names = "vsync", "lcd_sys";
|
interrupts = <0 202 0>, <0 203 0>;
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
port@0 {
|
reg = <0>;
|
decon_to_mic: endpoint {
|
remote-endpoint = <&mic_to_decon>;
|
};
|
};
|
};
|
};
|
