Device-Tree bindings for the NXP TDA998x HDMI transmitter
|
|
Required properties;
|
- compatible: must be "nxp,tda998x"
|
|
- reg: I2C address
|
|
Required node:
|
- port: Input port node with endpoint definition, as described
|
in Documentation/devicetree/bindings/graph.txt
|
|
Optional properties:
|
- interrupts: interrupt number and trigger type
|
default: polling
|
|
- pinctrl-0: pin control group to be used for
|
screen plug/unplug interrupt.
|
|
- pinctrl-names: must contain a "default" entry.
|
|
- video-ports: 24 bits value which defines how the video controller
|
output is wired to the TDA998x input - default: <0x230145>
|
|
- audio-ports: array of 8-bit values, 2 values per one DAI[1].
|
The first value defines the DAI type: TDA998x_SPDIF or TDA998x_I2S[2].
|
The second value defines the tda998x AP_ENA reg content when the DAI
|
in question is used. The implementation allows one or two DAIs. If two
|
DAIs are defined, they must be of different type.
|
|
- nxp,calib-gpios: calibration GPIO, which must correspond with the
|
gpio used for the TDA998x interrupt pin.
|
|
[1] Documentation/sound/soc/dai.rst
|
[2] include/dt-bindings/display/tda998x.h
|
|
Example:
|
|
#include <dt-bindings/display/tda998x.h>
|
|
tda998x: hdmi-encoder {
|
compatible = "nxp,tda998x";
|
reg = <0x70>;
|
interrupt-parent = <&gpio0>;
|
interrupts = <27 2>; /* falling edge */
|
pinctrl-0 = <&pmx_camera>;
|
pinctrl-names = "default";
|
video-ports = <0x230145>;
|
|
#sound-dai-cells = <2>;
|
/* DAI-format AP_ENA reg value */
|
audio-ports = < TDA998x_SPDIF 0x04
|
TDA998x_I2S 0x03>;
|
|
};
|
