Silicon Image SiI9234 HDMI/MHL bridge bindings
|
|
Required properties:
|
- compatible : "sil,sii9234".
|
- reg : I2C address for TPI interface, use 0x39
|
- avcc33-supply : MHL/USB Switch Supply Voltage (3.3V)
|
- iovcc18-supply : I/O Supply Voltage (1.8V)
|
- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
|
- cvcc12-supply : Digital Core Supply Voltage (1.2V)
|
- interrupts: interrupt specifier of INT pin
|
- reset-gpios: gpio specifier of RESET pin (active low)
|
- video interfaces: Device node can contain two video interface port
|
nodes for HDMI encoder and connector according to [1].
|
- port@0 - MHL to HDMI
|
- port@1 - MHL to connector
|
|
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
|
|
|
Example:
|
sii9234@39 {
|
compatible = "sil,sii9234";
|
reg = <0x39>;
|
avcc33-supply = <&vcc33mhl>;
|
iovcc18-supply = <&vcc18mhl>;
|
avcc12-supply = <&vsil12>;
|
cvcc12-supply = <&vsil12>;
|
reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
|
interrupt-parent = <&gpf3>;
|
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
port@0 {
|
reg = <0>;
|
mhl_to_hdmi: endpoint {
|
remote-endpoint = <&hdmi_to_mhl>;
|
};
|
};
|
port@1 {
|
reg = <1>;
|
mhl_to_connector: endpoint {
|
remote-endpoint = <&connector_to_mhl>;
|
};
|
};
|
};
|
};
|
