Renesas Gen3 DWC HDMI TX Encoder
|
================================
|
|
The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
|
with a companion PHY IP.
|
|
These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
|
Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
|
following device-specific properties.
|
|
|
Required properties:
|
|
- compatible : Shall contain one or more of
|
- "renesas,r8a7795-hdmi" for R8A7795 (R-Car H3) compatible HDMI TX
|
- "renesas,r8a7796-hdmi" for R8A7796 (R-Car M3-W) compatible HDMI TX
|
- "renesas,r8a77965-hdmi" for R8A77965 (R-Car M3-N) compatible HDMI TX
|
- "renesas,rcar-gen3-hdmi" for the generic R-Car Gen3 compatible HDMI TX
|
|
When compatible with generic versions, nodes must list the SoC-specific
|
version corresponding to the platform first, followed by the
|
family-specific version.
|
|
- reg: See dw_hdmi.txt.
|
- interrupts: HDMI interrupt number
|
- clocks: See dw_hdmi.txt.
|
- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
|
- ports: See dw_hdmi.txt. The DWC HDMI shall have one port numbered 0
|
corresponding to the video input of the controller and one port numbered 1
|
corresponding to its HDMI output, and one port numbered 2 corresponding to
|
sound input of the controller. Each port shall have a single endpoint.
|
|
Optional properties:
|
|
- power-domains: Shall reference the power domain that contains the DWC HDMI,
|
if any.
|
|
|
Example:
|
|
hdmi0: hdmi@fead0000 {
|
compatible = "renesas,r8a7795-dw-hdmi";
|
reg = <0 0xfead0000 0 0x10000>;
|
interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&cpg CPG_CORE R8A7795_CLK_S0D4>, <&cpg CPG_MOD 729>;
|
clock-names = "iahb", "isfr";
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
port@0 {
|
reg = <0>;
|
dw_hdmi0_in: endpoint {
|
remote-endpoint = <&du_out_hdmi0>;
|
};
|
};
|
port@1 {
|
reg = <1>;
|
rcar_dw_hdmi0_out: endpoint {
|
remote-endpoint = <&hdmi0_con>;
|
};
|
};
|
port@2 {
|
reg = <2>;
|
rcar_dw_hdmi0_sound_in: endpoint {
|
remote-endpoint = <&hdmi_sound_out>;
|
};
|
};
|
};
|
};
|
|
hdmi0-out {
|
compatible = "hdmi-connector";
|
label = "HDMI0 OUT";
|
type = "a";
|
|
port {
|
hdmi0_con: endpoint {
|
remote-endpoint = <&rcar_dw_hdmi0_out>;
|
};
|
};
|
};
|
