Synopsys DesignWare MIPI DSI host controller
|
============================================
|
|
This document defines device tree properties for the Synopsys DesignWare MIPI
|
DSI host controller. It doesn't constitue a device tree binding specification
|
by itself but is meant to be referenced by platform-specific device tree
|
bindings.
|
|
When referenced from platform device tree bindings the properties defined in
|
this document are defined as follows. The platform device tree bindings are
|
responsible for defining whether each optional property is used or not.
|
|
- reg: Memory mapped base address and length of the DesignWare MIPI DSI
|
host controller registers. (mandatory)
|
|
- clocks: References to all the clocks specified in the clock-names property
|
as specified in [1]. (mandatory)
|
|
- clock-names:
|
- "pclk" is the peripheral clock for either AHB and APB. (mandatory)
|
- "px_clk" is the pixel clock for the DPI/RGB input. (optional)
|
|
- resets: References to all the resets specified in the reset-names property
|
as specified in [2]. (optional)
|
|
- reset-names: string reset name, must be "apb" if used. (optional)
|
|
- panel or bridge node: see [3]. (mandatory)
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
[2] Documentation/devicetree/bindings/reset/reset.txt
|
[3] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
|
