Chipone ICN6211 MIPI-DSI to RGB bridge bindings
|
|
Required properties:
|
- compatible: "chipone,icn6211"
|
- reg: I2C slave address
|
- clocks: phandle to reference clock for RGB output clock.
|
- clock-names: name should be "refclk"
|
|
Optional properties:
|
- enable-gpios: a GPIO spec for the en pin
|
- vdd1-supply: phandle to vdd1 regulator device node
|
- vdd2-supply: phandle to vdd2 regulator device node
|
- vdd3-supply: phandle to vdd3 regulator device node
|
|
Example:
|
|
&i2c0 {
|
status = "okay";
|
|
icn6211@2c {
|
compatible = "chipone,icn6211";
|
reg = <0x2c>;
|
clocks = <&osc26m>;
|
clock-names = "refclk";
|
enable-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>;
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
port@0 {
|
reg = <0>;
|
|
icn6211_in_dsi: endpoint {
|
remote-endpoint = <&dsi_out_icn6211>;
|
};
|
};
|
|
port@1 {
|
reg = <1>;
|
|
icn6211_out_panel: endpoint {
|
remote-endpoint = <&panel_in_icn6211>;
|
};
|
};
|
};
|
|
};
|
};
|
