menuconfig ARCH_MXC
|
bool "Freescale i.MX family"
|
depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M
|
select ARCH_SUPPORTS_BIG_ENDIAN
|
select CLKSRC_IMX_GPT
|
select GENERIC_IRQ_CHIP
|
select GPIOLIB
|
select PINCTRL
|
select PM_OPP if PM
|
select SOC_BUS
|
select SRAM
|
help
|
Support for Freescale MXC/iMX-based family of processors
|
|
if ARCH_MXC
|
|
config MXC_TZIC
|
bool
|
|
config MXC_AVIC
|
bool
|
|
config MXC_DEBUG_BOARD
|
bool "Enable MXC debug board(for 3-stack)"
|
depends on MACH_MX27_3DS || MACH_MX31_3DS || MACH_MX35_3DS
|
help
|
The debug board is an integral part of the MXC 3-stack(PDK)
|
platforms, it can be attached or removed from the peripheral
|
board. On debug board, several debug devices(ethernet, UART,
|
buttons, LEDs and JTAG) are implemented. Between the MCU and
|
these devices, a CPLD is added as a bridge which performs
|
data/address de-multiplexing and decode, signal level shift,
|
interrupt control and various board functions.
|
|
config HAVE_IMX_ANATOP
|
bool
|
|
config HAVE_IMX_GPC
|
bool
|
select PM_GENERIC_DOMAINS if PM
|
|
config HAVE_IMX_MMDC
|
bool
|
|
config HAVE_IMX_SRC
|
def_bool y if SMP
|
select ARCH_HAS_RESET_CONTROLLER
|
|
config IMX_HAVE_IOMUX_V1
|
bool
|
|
config ARCH_MXC_IOMUX_V3
|
bool
|
|
config SOC_IMX21
|
bool
|
select CPU_ARM926T
|
select IMX_HAVE_IOMUX_V1
|
select MXC_AVIC
|
|
config SOC_IMX27
|
bool
|
select CPU_ARM926T
|
select IMX_HAVE_IOMUX_V1
|
select MXC_AVIC
|
select PINCTRL_IMX27
|
|
config SOC_IMX31
|
bool
|
select CPU_V6
|
select MXC_AVIC
|
|
config SOC_IMX35
|
bool
|
select ARCH_MXC_IOMUX_V3
|
select MXC_AVIC
|
select PINCTRL_IMX35
|
|
if ARCH_MULTI_V5
|
|
comment "MX21 platforms:"
|
|
config MACH_MX21ADS
|
bool "MX21ADS platform"
|
select IMX_HAVE_PLATFORM_IMX_FB
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
select SOC_IMX21
|
help
|
Include support for MX21ADS platform. This includes specific
|
configurations for the board and its peripherals.
|
|
comment "MX27 platforms:"
|
|
config MACH_MX27ADS
|
bool "MX27ADS platform"
|
select IMX_HAVE_PLATFORM_IMX_FB
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
select IMX_HAVE_PLATFORM_MXC_W1
|
select SOC_IMX27
|
help
|
Include support for MX27ADS platform. This includes specific
|
configurations for the board and its peripherals.
|
|
config MACH_MX27_3DS
|
bool "MX27PDK platform"
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
select IMX_HAVE_PLATFORM_IMX_FB
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_MX2_CAMERA
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
select MXC_DEBUG_BOARD
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
select SOC_IMX27
|
help
|
Include support for MX27PDK platform. This includes specific
|
configurations for the board and its peripherals.
|
|
config MACH_IMX27_VISSTRIM_M10
|
bool "Vista Silicon i.MX27 Visstrim_m10"
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_MX2_CAMERA
|
select IMX_HAVE_PLATFORM_MX2_EMMA
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
select LEDS_GPIO_REGISTER
|
select SOC_IMX27
|
help
|
Include support for Visstrim_m10 platform and its different variants.
|
This includes specific configurations for the board and its
|
peripherals.
|
|
config MACH_PCA100
|
bool "Phytec phyCARD-s (pca100)"
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
select IMX_HAVE_PLATFORM_IMX_FB
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
select IMX_HAVE_PLATFORM_MXC_W1
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
select SOC_IMX27
|
help
|
Include support for phyCARD-s (aka pca100) platform. This
|
includes specific configurations for the module and its peripherals.
|
|
config MACH_IMX27_DT
|
bool "Support i.MX27 platforms from device tree"
|
select SOC_IMX27
|
help
|
Include support for Freescale i.MX27 based platforms
|
using the device tree for discovery
|
|
endif
|
|
if ARCH_MULTI_V6
|
|
comment "MX31 platforms:"
|
|
config MACH_MX31ADS
|
bool "Support MX31ADS platforms"
|
default y
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select SOC_IMX31
|
help
|
Include support for MX31ADS platform. This includes specific
|
configurations for the board and its peripherals.
|
|
config MACH_MX31ADS_WM1133_EV1
|
bool "Support Wolfson Microelectronics 1133-EV1 module"
|
depends on MACH_MX31ADS
|
depends on MFD_WM8350_I2C
|
depends on REGULATOR_WM8350 = y
|
help
|
Include support for the Wolfson Microelectronics 1133-EV1 PMU
|
and audio module for the MX31ADS platform.
|
|
config MACH_MX31LILLY
|
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
select SOC_IMX31
|
help
|
Include support for mx31 based LILLY1131 modules. This includes
|
specific configurations for the board and its peripherals.
|
|
config MACH_MX31LITE
|
bool "Support MX31 LITEKIT (LogicPD)"
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
select IMX_HAVE_PLATFORM_MXC_RTC
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
select LEDS_GPIO_REGISTER
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
select SOC_IMX31
|
help
|
Include support for MX31 LITEKIT platform. This includes specific
|
configurations for the board and its peripherals.
|
|
config MACH_PCM037
|
bool "Support Phytec pcm037 (i.MX31) platforms"
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
select IMX_HAVE_PLATFORM_MXC_W1
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
select SOC_IMX31
|
help
|
Include support for Phytec pcm037 platform. This includes
|
specific configurations for the board and its peripherals.
|
|
config MACH_PCM037_EET
|
bool "Support pcm037 EET board extensions"
|
depends on MACH_PCM037
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
help
|
Add support for PCM037 EET baseboard extensions. If you are using the
|
OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
|
command-line parameter.
|
|
config MACH_MX31_3DS
|
bool "Support MX31PDK (3DS)"
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
select IMX_HAVE_PLATFORM_IMX_KEYPAD
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
select MXC_DEBUG_BOARD
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
select SOC_IMX31
|
help
|
Include support for MX31PDK (3DS) platform. This includes specific
|
configurations for the board and its peripherals.
|
|
config MACH_MX31_3DS_MXC_NAND_USE_BBT
|
bool "Make the MXC NAND driver use the in flash Bad Block Table"
|
depends on MACH_MX31_3DS
|
depends on MTD_NAND_MXC
|
help
|
Enable this if you want that the MXC NAND driver uses the in flash
|
Bad Block Table to know what blocks are bad instead of scanning the
|
entire flash looking for bad block markers.
|
|
config MACH_MX31MOBOARD
|
bool "Support mx31moboard platforms (EPFL Mobots group)"
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
select IMX_HAVE_PLATFORM_SPI_IMX
|
select LEDS_GPIO_REGISTER
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
select SOC_IMX31
|
help
|
Include support for mx31moboard platform. This includes specific
|
configurations for the board and its peripherals.
|
|
config MACH_QONG
|
bool "Support Dave/DENX QongEVB-LITE platform"
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select SOC_IMX31
|
help
|
Include support for Dave/DENX QongEVB-LITE platform. This includes
|
specific configurations for the board and its peripherals.
|
|
config MACH_ARMADILLO5X0
|
bool "Support Atmark Armadillo-500 Development Base Board"
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
select IMX_HAVE_PLATFORM_MXC_MMC
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
select SOC_IMX31
|
help
|
Include support for Atmark Armadillo-500 platform. This includes
|
specific configurations for the board and its peripherals.
|
|
config MACH_KZM_ARM11_01
|
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select SOC_IMX31
|
help
|
Include support for KZM-ARM11-01. This includes specific
|
configurations for the board and its peripherals.
|
|
config MACH_BUG
|
bool "Support Buglabs BUGBase platform"
|
default y
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select SOC_IMX31
|
help
|
Include support for BUGBase 1.3 platform. This includes specific
|
configurations for the board and its peripherals.
|
|
config MACH_IMX31_DT
|
bool "Support i.MX31 platforms from device tree"
|
select SOC_IMX31
|
help
|
Include support for Freescale i.MX31 based platforms
|
using the device tree for discovery.
|
|
comment "MX35 platforms:"
|
|
config MACH_IMX35_DT
|
bool "Support i.MX35 platforms from device tree"
|
select SOC_IMX35
|
help
|
Include support for Freescale i.MX35 based platforms
|
using the device tree for discovery.
|
|
config MACH_PCM043
|
bool "Support Phytec pcm043 (i.MX35) platforms"
|
select IMX_HAVE_PLATFORM_FLEXCAN
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
select IMX_HAVE_PLATFORM_IMX_SSI
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
select USB_ULPI_VIEWPORT if USB_ULPI
|
select SOC_IMX35
|
help
|
Include support for Phytec pcm043 platform. This includes
|
specific configurations for the board and its peripherals.
|
|
config MACH_MX35_3DS
|
bool "Support MX35PDK platform"
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
select IMX_HAVE_PLATFORM_IMX_FB
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
select IMX_HAVE_PLATFORM_MXC_RTC
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
select MXC_DEBUG_BOARD
|
select SOC_IMX35
|
help
|
Include support for MX35PDK platform. This includes specific
|
configurations for the board and its peripherals.
|
|
config MACH_VPR200
|
bool "Support VPR200 platform"
|
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
|
select IMX_HAVE_PLATFORM_GPIO_KEYS
|
select IMX_HAVE_PLATFORM_IMX2_WDT
|
select IMX_HAVE_PLATFORM_IMX_I2C
|
select IMX_HAVE_PLATFORM_IMX_UART
|
select IMX_HAVE_PLATFORM_IPU_CORE
|
select IMX_HAVE_PLATFORM_MXC_EHCI
|
select IMX_HAVE_PLATFORM_MXC_NAND
|
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
|
select SOC_IMX35
|
help
|
Include support for VPR200 platform. This includes specific
|
configurations for the board and its peripherals.
|
|
endif
|
|
comment "Device tree only"
|
|
if ARCH_MULTI_V4T
|
|
config SOC_IMX1
|
bool "i.MX1 support"
|
select CPU_ARM920T
|
select MXC_AVIC
|
select PINCTRL_IMX1
|
help
|
This enables support for Freescale i.MX1 processor
|
|
endif
|
|
if ARCH_MULTI_V5
|
|
config SOC_IMX25
|
bool "i.MX25 support"
|
select ARCH_MXC_IOMUX_V3
|
select CPU_ARM926T
|
select MXC_AVIC
|
select PINCTRL_IMX25
|
help
|
This enables support for Freescale i.MX25 processor
|
endif
|
|
if ARCH_MULTI_V7
|
|
comment "Cortex-A platforms"
|
|
config SOC_IMX5
|
bool
|
select HAVE_IMX_SRC
|
select MXC_TZIC
|
|
config SOC_IMX50
|
bool "i.MX50 support"
|
select PINCTRL_IMX50
|
select SOC_IMX5
|
|
help
|
This enables support for Freescale i.MX50 processor.
|
|
config SOC_IMX51
|
bool "i.MX51 support"
|
select PINCTRL_IMX51
|
select SOC_IMX5
|
help
|
This enables support for Freescale i.MX51 processor
|
|
config SOC_IMX53
|
bool "i.MX53 support"
|
select PINCTRL_IMX53
|
select SOC_IMX5
|
|
help
|
This enables support for Freescale i.MX53 processor.
|
|
config SOC_IMX6
|
bool
|
select ARM_CPU_SUSPEND if (PM || CPU_IDLE)
|
select ARM_ERRATA_754322
|
select ARM_ERRATA_775420
|
select ARM_GIC
|
select HAVE_IMX_ANATOP
|
select HAVE_IMX_GPC
|
select HAVE_IMX_MMDC
|
select HAVE_IMX_SRC
|
select MFD_SYSCON
|
select PL310_ERRATA_769419 if CACHE_L2X0
|
|
config SOC_IMX6Q
|
bool "i.MX6 Quad/DualLite support"
|
select ARM_ERRATA_764369 if SMP
|
select HAVE_ARM_SCU if SMP
|
select HAVE_ARM_TWD
|
select PINCTRL_IMX6Q
|
select SOC_IMX6
|
|
help
|
This enables support for Freescale i.MX6 Quad processor.
|
|
config SOC_IMX6SL
|
bool "i.MX6 SoloLite support"
|
select PINCTRL_IMX6SL
|
select SOC_IMX6
|
|
help
|
This enables support for Freescale i.MX6 SoloLite processor.
|
|
config SOC_IMX6SLL
|
bool "i.MX6 SoloLiteLite support"
|
select PINCTRL_IMX6SLL
|
select SOC_IMX6
|
|
help
|
This enables support for Freescale i.MX6 SoloLiteLite processor.
|
|
config SOC_IMX6SX
|
bool "i.MX6 SoloX support"
|
select PINCTRL_IMX6SX
|
select SOC_IMX6
|
|
help
|
This enables support for Freescale i.MX6 SoloX processor.
|
|
config SOC_IMX6UL
|
bool "i.MX6 UltraLite support"
|
select PINCTRL_IMX6UL
|
select SOC_IMX6
|
|
help
|
This enables support for Freescale i.MX6 UltraLite processor.
|
|
config SOC_LS1021A
|
bool "Freescale LS1021A support"
|
select ARM_GIC
|
select HAVE_ARM_ARCH_TIMER
|
select ZONE_DMA if ARM_LPAE
|
help
|
This enables support for Freescale LS1021A processor.
|
|
endif
|
|
comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms"
|
|
if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
|
|
config SOC_IMX7D_CA7
|
bool
|
select ARM_GIC
|
select HAVE_ARM_ARCH_TIMER
|
select HAVE_IMX_ANATOP
|
select HAVE_IMX_MMDC
|
select HAVE_IMX_SRC
|
select IMX_GPCV2
|
|
config SOC_IMX7D_CM4
|
bool
|
select ARMV7M_SYSTICK
|
|
config SOC_IMX7D
|
bool "i.MX7 Dual support"
|
select PINCTRL_IMX7D
|
select SOC_IMX7D_CA7 if ARCH_MULTI_V7
|
select SOC_IMX7D_CM4 if ARM_SINGLE_ARMV7M
|
help
|
This enables support for Freescale i.MX7 Dual processor.
|
|
config SOC_VF610
|
bool "Vybrid Family VF610 support"
|
select ARM_GIC if ARCH_MULTI_V7
|
select PINCTRL_VF610
|
|
help
|
This enables support for Freescale Vybrid VF610 processor.
|
|
choice
|
prompt "Clocksource for scheduler clock"
|
depends on SOC_VF610
|
default VF_USE_ARM_GLOBAL_TIMER
|
|
config VF_USE_ARM_GLOBAL_TIMER
|
bool "Use ARM Global Timer"
|
depends on ARCH_MULTI_V7
|
select ARM_GLOBAL_TIMER
|
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
|
help
|
Use the ARM Global Timer as clocksource
|
|
config VF_USE_PIT_TIMER
|
bool "Use PIT timer"
|
select VF_PIT_TIMER
|
help
|
Use SoC Periodic Interrupt Timer (PIT) as clocksource
|
|
endchoice
|
|
endif
|
|
source "arch/arm/mach-imx/devices/Kconfig"
|
|
endif
|
