Binding for the Synopsys HSDK reset controller
|
|
This binding uses the common reset binding[1].
|
|
[1] Documentation/devicetree/bindings/reset/reset.txt
|
|
Required properties:
|
- compatible: should be "snps,hsdk-reset".
|
- reg: should always contain 2 pairs address - length: first for reset
|
configuration register and second for corresponding SW reset and status bits
|
register.
|
- #reset-cells: from common reset binding; Should always be set to 1.
|
|
Example:
|
reset: reset@880 {
|
compatible = "snps,hsdk-reset";
|
#reset-cells = <1>;
|
reg = <0x8A0 0x4>, <0xFF0 0x4>;
|
};
|
|
Specifying reset lines connected to IP modules:
|
ethernet@.... {
|
....
|
resets = <&reset HSDK_V1_ETH_RESET>;
|
....
|
};
|
|
The index could be found in <dt-bindings/reset/snps,hsdk-reset.h>
|
