// SPDX-License-Identifier: GPL-2.0-only
|
/*
|
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
|
*/
|
/dts-v1/;
|
|
#include "omap443x.dtsi"
|
#include "elpida_ecb240abacn.dtsi"
|
#include "omap4-mcpdm.dtsi"
|
|
/ {
|
model = "TI OMAP4 SDP board";
|
compatible = "ti,omap4-sdp", "ti,omap4430", "ti,omap4";
|
|
memory@80000000 {
|
device_type = "memory";
|
reg = <0x80000000 0x40000000>; /* 1 GB */
|
};
|
|
aliases {
|
display0 = &lcd0;
|
display1 = &lcd1;
|
display2 = &hdmi0;
|
};
|
|
vdd_eth: fixedregulator-vdd-eth {
|
pinctrl-names = "default";
|
pinctrl-0 = <&enet_enable_gpio>;
|
|
compatible = "regulator-fixed";
|
regulator-name = "VDD_ETH";
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */
|
enable-active-high;
|
regulator-boot-on;
|
startup-delay-us = <25000>;
|
};
|
|
vbat: fixedregulator-vbat {
|
compatible = "regulator-fixed";
|
regulator-name = "VBAT";
|
regulator-min-microvolt = <3750000>;
|
regulator-max-microvolt = <3750000>;
|
regulator-boot-on;
|
};
|
|
leds {
|
compatible = "gpio-leds";
|
debug0 {
|
label = "omap4:green:debug0";
|
gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; /* 61 */
|
};
|
|
debug1 {
|
label = "omap4:green:debug1";
|
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; /* 30 */
|
};
|
|
debug2 {
|
label = "omap4:green:debug2";
|
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; /* 7 */
|
};
|
|
debug3 {
|
label = "omap4:green:debug3";
|
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* 8 */
|
};
|
|
debug4 {
|
label = "omap4:green:debug4";
|
gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; /* 50 */
|
};
|
|
user1 {
|
label = "omap4:blue:user";
|
gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* 169 */
|
};
|
|
user2 {
|
label = "omap4:red:user";
|
gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; /* 170 */
|
};
|
|
user3 {
|
label = "omap4:green:user";
|
gpios = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* 139 */
|
};
|
};
|
|
pwmleds {
|
compatible = "pwm-leds";
|
kpad {
|
label = "omap4::keypad";
|
pwms = <&twl_pwm 0 7812500>;
|
max-brightness = <127>;
|
};
|
|
charging {
|
label = "omap4:green:chrg";
|
pwms = <&twl_pwmled 0 7812500>;
|
max-brightness = <255>;
|
};
|
};
|
|
backlight {
|
compatible = "pwm-backlight";
|
pwms = <&twl_pwm 1 7812500>;
|
brightness-levels = <
|
0 10 20 30 40
|
50 60 70 80 90
|
100 110 120 127
|
>;
|
default-brightness-level = <13>;
|
};
|
|
sound {
|
compatible = "ti,abe-twl6040";
|
ti,model = "SDP4430";
|
|
ti,jack-detection = <1>;
|
ti,mclk-freq = <38400000>;
|
|
ti,mcpdm = <&mcpdm>;
|
ti,dmic = <&dmic>;
|
|
ti,twl6040 = <&twl6040>;
|
|
/* Audio routing */
|
ti,audio-routing =
|
"Headset Stereophone", "HSOL",
|
"Headset Stereophone", "HSOR",
|
"Earphone Spk", "EP",
|
"Ext Spk", "HFL",
|
"Ext Spk", "HFR",
|
"Line Out", "AUXL",
|
"Line Out", "AUXR",
|
"Vibrator", "VIBRAL",
|
"Vibrator", "VIBRAR",
|
"HSMIC", "Headset Mic",
|
"Headset Mic", "Headset Mic Bias",
|
"MAINMIC", "Main Handset Mic",
|
"Main Handset Mic", "Main Mic Bias",
|
"SUBMIC", "Sub Handset Mic",
|
"Sub Handset Mic", "Main Mic Bias",
|
"AFML", "Line In",
|
"AFMR", "Line In",
|
"DMic", "Digital Mic",
|
"Digital Mic", "Digital Mic1 Bias";
|
};
|
|
/* regulator for wl12xx on sdio5 */
|
wl12xx_vmmc: wl12xx_vmmc {
|
pinctrl-names = "default";
|
pinctrl-0 = <&wl12xx_gpio>;
|
compatible = "regulator-fixed";
|
regulator-name = "vwl1271";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>;
|
startup-delay-us = <70000>;
|
enable-active-high;
|
};
|
|
tpd12s015: encoder {
|
compatible = "ti,tpd12s015";
|
|
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
|
<&gpio2 9 GPIO_ACTIVE_HIGH>, /* 41, LS OE */
|
<&gpio2 31 GPIO_ACTIVE_HIGH>; /* 63, HPD */
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
port@0 {
|
reg = <0>;
|
|
tpd12s015_in: endpoint {
|
remote-endpoint = <&hdmi_out>;
|
};
|
};
|
|
port@1 {
|
reg = <1>;
|
|
tpd12s015_out: endpoint {
|
remote-endpoint = <&hdmi_connector_in>;
|
};
|
};
|
};
|
};
|
|
hdmi0: connector {
|
compatible = "hdmi-connector";
|
label = "hdmi";
|
|
type = "c";
|
|
port {
|
hdmi_connector_in: endpoint {
|
remote-endpoint = <&tpd12s015_out>;
|
};
|
};
|
};
|
};
|
|
&omap4_pmx_core {
|
pinctrl-names = "default";
|
pinctrl-0 = <
|
&dss_hdmi_pins
|
&tpd12s015_pins
|
>;
|
|
uart2_pins: pinmux_uart2_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
|
OMAP4_IOPAD(0x11a, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
|
OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_rx.uart2_rx */
|
OMAP4_IOPAD(0x11e, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
|
>;
|
};
|
|
uart3_pins: pinmux_uart3_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x140, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
|
OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
|
OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
|
OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
|
>;
|
};
|
|
uart4_pins: pinmux_uart4_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0) /* uart4_rx.uart4_rx */
|
OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0) /* uart4_tx.uart4_tx */
|
>;
|
};
|
|
twl6040_pins: pinmux_twl6040_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x120, PIN_OUTPUT | MUX_MODE3) /* hdq_sio.gpio_127 */
|
OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */
|
>;
|
};
|
|
dmic_pins: pinmux_dmic_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x110, PIN_OUTPUT | MUX_MODE0) /* abe_dmic_clk1.abe_dmic_clk1 */
|
OMAP4_IOPAD(0x112, PIN_INPUT | MUX_MODE0) /* abe_dmic_din1.abe_dmic_din1 */
|
OMAP4_IOPAD(0x114, PIN_INPUT | MUX_MODE0) /* abe_dmic_din2.abe_dmic_din2 */
|
OMAP4_IOPAD(0x116, PIN_INPUT | MUX_MODE0) /* abe_dmic_din3.abe_dmic_din3 */
|
>;
|
};
|
|
mcbsp1_pins: pinmux_mcbsp1_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */
|
OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */
|
OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */
|
OMAP4_IOPAD(0x104, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_fsx.abe_mcbsp1_fsx */
|
>;
|
};
|
|
mcbsp2_pins: pinmux_mcbsp2_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_clkx.abe_mcbsp2_clkx */
|
OMAP4_IOPAD(0x0f8, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dr.abe_mcbsp2_dr */
|
OMAP4_IOPAD(0x0fa, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp2_dx.abe_mcbsp2_dx */
|
OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0) /* abe_mcbsp2_fsx.abe_mcbsp2_fsx */
|
>;
|
};
|
|
mcspi1_pins: pinmux_mcspi1_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x132, PIN_INPUT | MUX_MODE0) /* mcspi1_clk.mcspi1_clk */
|
OMAP4_IOPAD(0x134, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
|
OMAP4_IOPAD(0x136, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
|
OMAP4_IOPAD(0x138, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
|
>;
|
};
|
|
dss_hdmi_pins: pinmux_dss_hdmi_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */
|
OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_scl.hdmi_scl */
|
OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_sda.hdmi_sda */
|
>;
|
};
|
|
tpd12s015_pins: pinmux_tpd12s015_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x062, PIN_OUTPUT | MUX_MODE3) /* gpmc_a17.gpio_41 */
|
OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) /* gpmc_nbe1.gpio_60 */
|
OMAP4_IOPAD(0x098, PIN_INPUT_PULLDOWN | MUX_MODE3) /* hdmi_hpd.gpio_63 */
|
>;
|
};
|
|
i2c1_pins: pinmux_i2c1_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
|
OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
|
>;
|
};
|
|
i2c2_pins: pinmux_i2c2_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
|
OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
|
>;
|
};
|
|
i2c3_pins: pinmux_i2c3_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
|
OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
|
>;
|
};
|
|
i2c4_pins: pinmux_i2c4_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_scl */
|
OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
|
>;
|
};
|
|
/* wl12xx GPIO output for WLAN_EN */
|
wl12xx_gpio: pinmux_wl12xx_gpio {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3) /* gpmc_nwp.gpio_54 */
|
>;
|
};
|
|
/* wl12xx GPIO inputs and SDIO pins */
|
wl12xx_pins: pinmux_wl12xx_pins {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
|
OMAP4_IOPAD(0x148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
|
OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
|
OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
|
OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
|
OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */
|
OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */
|
>;
|
};
|
|
/* gpio_48 for ENET_ENABLE */
|
enet_enable_gpio: pinmux_enet_enable_gpio {
|
pinctrl-single,pins = <
|
OMAP4_IOPAD(0x070, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* gpmc_a24.gpio_48 */
|
>;
|
};
|
|
ks8851_pins: pinmux_ks8851_pins {
|
pinctrl-single,pins = <
|
/* ENET_INT */
|
OMAP4_IOPAD(0x054, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ad10.gpio_34 */
|
/*
|
* Misterious pin which makes the ethernet working
|
* The legacy board file requested this pin on boot
|
* (ETH_KS8851_QUART) and set it to high, similarly to
|
* the ENET_ENABLE pin.
|
* We could use gpio-hog to keep it high, but let's use
|
* it as a reset GPIO for ks8851.
|
*/
|
OMAP4_IOPAD(0x13a, PIN_OUTPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.gpio_138 */
|
>;
|
};
|
};
|
|
&i2c1 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c1_pins>;
|
|
clock-frequency = <400000>;
|
|
twl: twl@48 {
|
reg = <0x48>;
|
/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
|
};
|
|
twl6040: twl@4b {
|
compatible = "ti,twl6040";
|
#clock-cells = <0>;
|
reg = <0x4b>;
|
|
pinctrl-names = "default";
|
pinctrl-0 = <&twl6040_pins>;
|
|
/* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
|
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
|
ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */
|
|
vio-supply = <&v1v8>;
|
v2v1-supply = <&v2v1>;
|
enable-active-high;
|
|
/* regulators for vibra motor */
|
vddvibl-supply = <&vbat>;
|
vddvibr-supply = <&vbat>;
|
|
vibra {
|
/* Vibra driver, motor resistance parameters */
|
ti,vibldrv-res = <8>;
|
ti,vibrdrv-res = <3>;
|
ti,viblmotor-res = <10>;
|
ti,vibrmotor-res = <10>;
|
};
|
};
|
};
|
|
#include "twl6030.dtsi"
|
#include "twl6030_omap4.dtsi"
|
|
&i2c2 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c2_pins>;
|
|
clock-frequency = <400000>;
|
};
|
|
&i2c3 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c3_pins>;
|
|
clock-frequency = <400000>;
|
|
/*
|
* Temperature Sensor
|
* https://www.ti.com/lit/ds/symlink/tmp105.pdf
|
*/
|
tmp105@48 {
|
compatible = "ti,tmp105";
|
reg = <0x48>;
|
};
|
|
/*
|
* Ambient Light Sensor
|
* http://www.rohm.com/products/databook/sensor/pdf/bh1780gli-e.pdf
|
*/
|
bh1780@29 {
|
compatible = "rohm,bh1780";
|
reg = <0x29>;
|
};
|
};
|
|
&i2c4 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&i2c4_pins>;
|
|
clock-frequency = <400000>;
|
|
/*
|
* 3-Axis Digital Compass
|
* https://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
|
*/
|
hmc5843@1e {
|
compatible = "honeywell,hmc5843";
|
reg = <0x1e>;
|
};
|
};
|
|
&mcspi1 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&mcspi1_pins>;
|
|
eth@0 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&ks8851_pins>;
|
|
compatible = "ks8851";
|
spi-max-frequency = <24000000>;
|
reg = <0>;
|
interrupt-parent = <&gpio2>;
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; /* gpio line 34 */
|
vdd-supply = <&vdd_eth>;
|
reset-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
|
};
|
};
|
|
&mmc1 {
|
vmmc-supply = <&vmmc>;
|
bus-width = <8>;
|
};
|
|
&mmc2 {
|
vmmc-supply = <&vaux1>;
|
bus-width = <8>;
|
ti,non-removable;
|
};
|
|
&mmc3 {
|
status = "disabled";
|
};
|
|
&mmc4 {
|
status = "disabled";
|
};
|
|
&mmc5 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&wl12xx_pins>;
|
vmmc-supply = <&wl12xx_vmmc>;
|
non-removable;
|
bus-width = <4>;
|
cap-power-off-card;
|
|
#address-cells = <1>;
|
#size-cells = <0>;
|
wlcore: wlcore@2 {
|
compatible = "ti,wl1281";
|
reg = <2>;
|
interrupt-parent = <&gpio1>;
|
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */
|
ref-clock-frequency = <26000000>;
|
tcxo-clock-frequency = <26000000>;
|
};
|
};
|
|
&emif1 {
|
cs1-used;
|
device-handle = <&elpida_ECB240ABACN>;
|
};
|
|
&emif2 {
|
cs1-used;
|
device-handle = <&elpida_ECB240ABACN>;
|
};
|
|
&keypad {
|
keypad,num-rows = <8>;
|
keypad,num-columns = <8>;
|
linux,keymap = <0x00000012 /* KEY_E */
|
0x00010013 /* KEY_R */
|
0x00020014 /* KEY_T */
|
0x00030066 /* KEY_HOME */
|
0x0004003f /* KEY_F5 */
|
0x000500f0 /* KEY_UNKNOWN */
|
0x00060017 /* KEY_I */
|
0x0007002a /* KEY_LEFTSHIFT */
|
0x01000020 /* KEY_D*/
|
0x01010021 /* KEY_F */
|
0x01020022 /* KEY_G */
|
0x010300e7 /* KEY_SEND */
|
0x01040040 /* KEY_F6 */
|
0x010500f0 /* KEY_UNKNOWN */
|
0x01060025 /* KEY_K */
|
0x0107001c /* KEY_ENTER */
|
0x0200002d /* KEY_X */
|
0x0201002e /* KEY_C */
|
0x0202002f /* KEY_V */
|
0x0203006b /* KEY_END */
|
0x02040041 /* KEY_F7 */
|
0x020500f0 /* KEY_UNKNOWN */
|
0x02060034 /* KEY_DOT */
|
0x0207003a /* KEY_CAPSLOCK */
|
0x0300002c /* KEY_Z */
|
0x0301004e /* KEY_KPLUS */
|
0x03020030 /* KEY_B */
|
0x0303003b /* KEY_F1 */
|
0x03040042 /* KEY_F8 */
|
0x030500f0 /* KEY_UNKNOWN */
|
0x03060018 /* KEY_O */
|
0x03070039 /* KEY_SPACE */
|
0x04000011 /* KEY_W */
|
0x04010015 /* KEY_Y */
|
0x04020016 /* KEY_U */
|
0x0403003c /* KEY_F2 */
|
0x04040073 /* KEY_VOLUMEUP */
|
0x040500f0 /* KEY_UNKNOWN */
|
0x04060026 /* KEY_L */
|
0x04070069 /* KEY_LEFT */
|
0x0500001f /* KEY_S */
|
0x05010023 /* KEY_H */
|
0x05020024 /* KEY_J */
|
0x0503003d /* KEY_F3 */
|
0x05040043 /* KEY_F9 */
|
0x05050072 /* KEY_VOLUMEDOWN */
|
0x05060032 /* KEY_M */
|
0x0507006a /* KEY_RIGHT */
|
0x06000010 /* KEY_Q */
|
0x0601001e /* KEY_A */
|
0x06020031 /* KEY_N */
|
0x0603009e /* KEY_BACK */
|
0x0604000e /* KEY_BACKSPACE */
|
0x060500f0 /* KEY_UNKNOWN */
|
0x06060019 /* KEY_P */
|
0x06070067 /* KEY_UP */
|
0x07000094 /* KEY_PROG1 */
|
0x07010095 /* KEY_PROG2 */
|
0x070200ca /* KEY_PROG3 */
|
0x070300cb /* KEY_PROG4 */
|
0x0704003e /* KEY_F4 */
|
0x070500f0 /* KEY_UNKNOWN */
|
0x07060160 /* KEY_OK */
|
0x0707006c>; /* KEY_DOWN */
|
linux,input-no-autorepeat;
|
};
|
|
&uart2 {
|
interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
|
&omap4_pmx_core OMAP4_UART2_RX>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart2_pins>;
|
};
|
|
&uart3 {
|
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
|
&omap4_pmx_core OMAP4_UART3_RX>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart3_pins>;
|
};
|
|
&uart4 {
|
interrupts-extended = <&wakeupgen GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
|
&omap4_pmx_core OMAP4_UART4_RX>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart4_pins>;
|
};
|
|
&mcbsp1 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&mcbsp1_pins>;
|
status = "okay";
|
};
|
|
&mcbsp2 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&mcbsp2_pins>;
|
status = "okay";
|
};
|
|
&dmic {
|
pinctrl-names = "default";
|
pinctrl-0 = <&dmic_pins>;
|
status = "okay";
|
};
|
|
&twl_usb_comparator {
|
usb-supply = <&vusb>;
|
};
|
|
&usb_otg_hs {
|
interface-type = <1>;
|
mode = <3>;
|
power = <50>;
|
};
|
|
&dss {
|
status = "okay";
|
};
|
|
&dsi1 {
|
status = "okay";
|
vdd-supply = <&vcxio>;
|
|
port {
|
dsi1_out_ep: endpoint {
|
remote-endpoint = <&lcd0_in>;
|
lanes = <0 1 2 3 4 5>;
|
};
|
};
|
|
lcd0: panel@0 {
|
compatible = "tpo,taal", "panel-dsi-cm";
|
reg = <0>;
|
label = "lcd0";
|
|
reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
|
|
port {
|
lcd0_in: endpoint {
|
remote-endpoint = <&dsi1_out_ep>;
|
};
|
};
|
};
|
};
|
|
&dsi2 {
|
status = "okay";
|
vdd-supply = <&vcxio>;
|
|
port {
|
dsi2_out_ep: endpoint {
|
remote-endpoint = <&lcd1_in>;
|
lanes = <0 1 2 3 4 5>;
|
};
|
};
|
|
lcd1: panel@0 {
|
compatible = "tpo,taal", "panel-dsi-cm";
|
reg = <0>;
|
label = "lcd1";
|
|
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
|
|
port {
|
lcd1_in: endpoint {
|
remote-endpoint = <&dsi2_out_ep>;
|
};
|
};
|
};
|
};
|
|
&hdmi {
|
status = "okay";
|
vdda-supply = <&vdac>;
|
|
port {
|
hdmi_out: endpoint {
|
remote-endpoint = <&tpd12s015_in>;
|
};
|
};
|
};
|
