// SPDX-License-Identifier: GPL-2.0-only
|
/*
|
* Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
|
*/
|
/dts-v1/;
|
|
#include "omap36xx.dtsi"
|
|
/ {
|
model = "TI OMAP3 BeagleBoard xM";
|
compatible = "ti,omap3-beagle-xm", "ti,omap3630", "ti,omap36xx", "ti,omap3";
|
|
cpus {
|
cpu@0 {
|
cpu0-supply = <&vcc>;
|
};
|
};
|
|
memory@80000000 {
|
device_type = "memory";
|
reg = <0x80000000 0x20000000>; /* 512 MB */
|
};
|
|
aliases {
|
display0 = &dvi0;
|
display1 = &tv0;
|
ethernet = ðernet;
|
};
|
|
/* fixed 26MHz oscillator */
|
hfclk_26m: oscillator {
|
#clock-cells = <0>;
|
compatible = "fixed-clock";
|
clock-frequency = <26000000>;
|
};
|
|
leds {
|
compatible = "gpio-leds";
|
|
heartbeat {
|
label = "beagleboard::usr0";
|
gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* 150 -> D6 LED */
|
linux,default-trigger = "heartbeat";
|
};
|
|
mmc {
|
label = "beagleboard::usr1";
|
gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; /* 149 -> D7 LED */
|
linux,default-trigger = "mmc0";
|
};
|
};
|
|
pwmleds {
|
compatible = "pwm-leds";
|
|
pmu_stat {
|
label = "beagleboard::pmu_stat";
|
pwms = <&twl_pwmled 1 7812500>;
|
max-brightness = <127>;
|
};
|
};
|
|
sound {
|
compatible = "ti,omap-twl4030";
|
ti,model = "omap3beagle";
|
|
ti,mcbsp = <&mcbsp2>;
|
};
|
|
gpio_keys {
|
compatible = "gpio-keys";
|
|
user {
|
label = "user";
|
gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
linux,code = <0x114>;
|
wakeup-source;
|
};
|
|
};
|
|
/* HS USB Port 2 Power */
|
hsusb2_power: hsusb2_power_reg {
|
compatible = "regulator-fixed";
|
regulator-name = "hsusb2_vbus";
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */
|
startup-delay-us = <70000>;
|
};
|
|
/* HS USB Host PHY on PORT 2 */
|
hsusb2_phy: hsusb2_phy {
|
compatible = "usb-nop-xceiv";
|
reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
|
vcc-supply = <&hsusb2_power>;
|
#phy-cells = <0>;
|
};
|
|
tfp410: encoder0 {
|
compatible = "ti,tfp410";
|
powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
|
|
/* XXX pinctrl from twl */
|
|
ports {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
port@0 {
|
reg = <0>;
|
|
tfp410_in: endpoint {
|
remote-endpoint = <&dpi_out>;
|
};
|
};
|
|
port@1 {
|
reg = <1>;
|
|
tfp410_out: endpoint {
|
remote-endpoint = <&dvi_connector_in>;
|
};
|
};
|
};
|
};
|
|
dvi0: connector0 {
|
compatible = "dvi-connector";
|
label = "dvi";
|
|
digital;
|
|
ddc-i2c-bus = <&i2c3>;
|
|
port {
|
dvi_connector_in: endpoint {
|
remote-endpoint = <&tfp410_out>;
|
};
|
};
|
};
|
|
tv0: connector1 {
|
compatible = "svideo-connector";
|
label = "tv";
|
|
port {
|
tv_connector_in: endpoint {
|
remote-endpoint = <&venc_out>;
|
};
|
};
|
};
|
|
etb@5401b000 {
|
compatible = "arm,coresight-etb10", "arm,primecell";
|
reg = <0x5401b000 0x1000>;
|
|
clocks = <&emu_src_ck>;
|
clock-names = "apb_pclk";
|
in-ports {
|
port {
|
etb_in: endpoint {
|
remote-endpoint = <&etm_out>;
|
};
|
};
|
};
|
};
|
|
etm@54010000 {
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
reg = <0x54010000 0x1000>;
|
|
clocks = <&emu_src_ck>;
|
clock-names = "apb_pclk";
|
out-ports {
|
port {
|
etm_out: endpoint {
|
remote-endpoint = <&etb_in>;
|
};
|
};
|
};
|
};
|
};
|
|
&omap3_pmx_wkup {
|
gpio1_pins: pinmux_gpio1_pins {
|
pinctrl-single,pins = <
|
OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */
|
>;
|
};
|
|
dss_dpi_pins2: pinmux_dss_dpi_pins1 {
|
pinctrl-single,pins = <
|
OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
|
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
|
OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
|
OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
|
OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
|
OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
|
>;
|
};
|
};
|
|
&omap3_pmx_core {
|
pinctrl-names = "default";
|
pinctrl-0 = <
|
&hsusb2_pins
|
>;
|
|
uart3_pins: pinmux_uart3_pins {
|
pinctrl-single,pins = <
|
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
|
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
|
>;
|
};
|
|
hsusb2_pins: pinmux_hsusb2_pins {
|
pinctrl-single,pins = <
|
OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
|
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
|
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
|
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
|
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
|
OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
|
>;
|
};
|
|
dss_dpi_pins1: pinmux_dss_dpi_pins2 {
|
pinctrl-single,pins = <
|
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
|
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
|
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE3) /* dss_data18.dss_data0 */
|
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE3) /* dss_data19.dss_data1 */
|
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE3) /* dss_data20.dss_data2 */
|
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE3) /* dss_data21.dss_data3 */
|
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE3) /* dss_data22.dss_data4 */
|
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE3) /* dss_data23.dss_data5 */
|
>;
|
};
|
};
|
|
&omap3_pmx_core2 {
|
pinctrl-names = "default";
|
pinctrl-0 = <
|
&hsusb2_2_pins
|
>;
|
|
hsusb2_2_pins: pinmux_hsusb2_2_pins {
|
pinctrl-single,pins = <
|
OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
|
OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
|
OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
|
OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
|
OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
|
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
|
>;
|
};
|
};
|
|
&i2c1 {
|
clock-frequency = <2600000>;
|
|
twl: twl@48 {
|
reg = <0x48>;
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
interrupt-parent = <&intc>;
|
|
clocks = <&hfclk_26m>;
|
clock-names = "fck";
|
|
twl_audio: audio {
|
compatible = "ti,twl4030-audio";
|
codec {
|
};
|
};
|
|
twl_power: power {
|
compatible = "ti,twl4030-power-beagleboard-xm", "ti,twl4030-power-idle-osc-off";
|
ti,use_poweroff;
|
};
|
};
|
};
|
|
#include "twl4030.dtsi"
|
#include "twl4030_omap3.dtsi"
|
|
&i2c2 {
|
clock-frequency = <400000>;
|
};
|
|
&i2c3 {
|
clock-frequency = <100000>;
|
};
|
|
&mmc1 {
|
vmmc-supply = <&vmmc1>;
|
vqmmc-supply = <&vsim>;
|
bus-width = <8>;
|
};
|
|
&mmc2 {
|
status = "disabled";
|
};
|
|
&mmc3 {
|
status = "disabled";
|
};
|
|
&twl_gpio {
|
ti,use-leds;
|
/* pullups: BIT(1) */
|
ti,pullups = <0x000002>;
|
/*
|
* pulldowns:
|
* BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
|
* BIT(15), BIT(16), BIT(17)
|
*/
|
ti,pulldowns = <0x03a1c4>;
|
};
|
|
&usb_otg_hs {
|
interface-type = <0>;
|
usb-phy = <&usb2_phy>;
|
phys = <&usb2_phy>;
|
phy-names = "usb2-phy";
|
mode = <3>;
|
power = <50>;
|
};
|
|
&uart3 {
|
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&uart3_pins>;
|
};
|
|
&gpio1 {
|
pinctrl-names = "default";
|
pinctrl-0 = <&gpio1_pins>;
|
};
|
|
&usbhshost {
|
port2-mode = "ehci-phy";
|
};
|
|
&usbhsehci {
|
phys = <0 &hsusb2_phy>;
|
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
hub@2 {
|
compatible = "usb424,9514";
|
reg = <2>;
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
ethernet: usbether@1 {
|
compatible = "usb424,ec00";
|
reg = <1>;
|
};
|
};
|
};
|
|
&vaux2 {
|
regulator-name = "usb_1v8";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-always-on;
|
};
|
|
&mcbsp2 {
|
status = "okay";
|
};
|
|
&dss {
|
status = "okay";
|
|
pinctrl-names = "default";
|
pinctrl-0 = <
|
&dss_dpi_pins1
|
&dss_dpi_pins2
|
>;
|
|
port {
|
dpi_out: endpoint {
|
remote-endpoint = <&tfp410_in>;
|
data-lines = <24>;
|
};
|
};
|
};
|
|
&venc {
|
status = "okay";
|
|
vdda-supply = <&vdac>;
|
|
port {
|
venc_out: endpoint {
|
remote-endpoint = <&tv_connector_in>;
|
ti,channels = <2>;
|
};
|
};
|
};
|
