// SPDX-License-Identifier: GPL-2.0
|
#include "kirkwood.dtsi"
|
#include "kirkwood-6281.dtsi"
|
|
/ {
|
chosen {
|
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
stdout-path = &uart0;
|
};
|
|
ocp@f1000000 {
|
pinctrl: pin-controller@10000 {
|
/* Non-default UART pins */
|
pmx_uart0: pmx-uart0 {
|
marvell,pins = "mpp4", "mpp5";
|
};
|
|
pmx_power_hdd: pmx-power-hdd {
|
marvell,pins = "mpp10";
|
marvell,function = "gpo";
|
};
|
pmx_usb_vbus: pmx-usb-vbus {
|
marvell,pins = "mpp11";
|
marvell,function = "gpio";
|
};
|
pmx_fan_high: pmx-fan-high {
|
marvell,pins = "mpp18";
|
marvell,function = "gpo";
|
};
|
pmx_fan_low: pmx-fan-low {
|
marvell,pins = "mpp19";
|
marvell,function = "gpo";
|
};
|
pmx_led_function_blue: pmx-led-function-blue {
|
marvell,pins = "mpp36";
|
marvell,function = "gpio";
|
};
|
pmx_led_alarm: pmx-led-alarm {
|
marvell,pins = "mpp37";
|
marvell,function = "gpio";
|
};
|
pmx_led_info: pmx-led-info {
|
marvell,pins = "mpp38";
|
marvell,function = "gpio";
|
};
|
pmx_led_power: pmx-led-power {
|
marvell,pins = "mpp39";
|
marvell,function = "gpio";
|
};
|
pmx_fan_lock: pmx-fan-lock {
|
marvell,pins = "mpp40";
|
marvell,function = "gpio";
|
};
|
pmx_button_function: pmx-button-function {
|
marvell,pins = "mpp41";
|
marvell,function = "gpio";
|
};
|
pmx_power_switch: pmx-power-switch {
|
marvell,pins = "mpp42";
|
marvell,function = "gpio";
|
};
|
pmx_power_auto_switch: pmx-power-auto-switch {
|
marvell,pins = "mpp43";
|
marvell,function = "gpio";
|
};
|
pmx_led_function_red: pmx-led-function_red {
|
marvell,pins = "mpp48";
|
marvell,function = "gpio";
|
};
|
|
};
|
sata@80000 {
|
status = "okay";
|
nr-ports = <1>;
|
};
|
|
spi@10600 {
|
status = "okay";
|
|
m25p40@0 {
|
#address-cells = <1>;
|
#size-cells = <1>;
|
compatible = "m25p40", "jedec,spi-nor";
|
reg = <0>;
|
spi-max-frequency = <25000000>;
|
mode = <0>;
|
|
partition@0 {
|
reg = <0x0 0x60000>;
|
label = "uboot";
|
read-only;
|
};
|
|
partition@60000 {
|
reg = <0x60000 0x10000>;
|
label = "dtb";
|
read-only;
|
};
|
|
partition@70000 {
|
reg = <0x70000 0x10000>;
|
label = "uboot_env";
|
};
|
};
|
};
|
};
|
|
gpio_keys {
|
compatible = "gpio-keys";
|
#address-cells = <1>;
|
#size-cells = <0>;
|
pinctrl-0 = <&pmx_button_function &pmx_power_switch
|
&pmx_power_auto_switch>;
|
pinctrl-names = "default";
|
|
option {
|
label = "Function Button";
|
linux,code = <KEY_OPTION>;
|
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
|
};
|
reserved {
|
label = "Power-on Switch";
|
linux,code = <KEY_RESERVED>;
|
linux,input-type = <5>;
|
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
|
};
|
power {
|
label = "Power-auto Switch";
|
linux,code = <KEY_ESC>;
|
linux,input-type = <5>;
|
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
|
};
|
};
|
|
gpio_leds {
|
compatible = "gpio-leds";
|
pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
|
&pmx_led_info &pmx_led_power
|
&pmx_led_function_blue>;
|
pinctrl-names = "default";
|
|
func_blue {
|
label = "lsxl:blue:func";
|
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
|
};
|
|
alarm {
|
label = "lsxl:red:alarm";
|
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
|
};
|
|
info {
|
label = "lsxl:amber:info";
|
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
|
};
|
|
power {
|
label = "lsxl:blue:power";
|
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
|
default-state = "keep";
|
};
|
|
func_red {
|
label = "lsxl:red:func";
|
gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
|
};
|
};
|
|
gpio_fan {
|
compatible = "gpio-fan";
|
pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
|
pinctrl-names = "default";
|
gpios = <&gpio0 19 GPIO_ACTIVE_LOW
|
&gpio0 18 GPIO_ACTIVE_LOW>;
|
gpio-fan,speed-map = <0 3
|
1500 2
|
3250 1
|
5000 0>;
|
alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
|
};
|
|
restart_poweroff {
|
compatible = "restart-poweroff";
|
};
|
|
regulators {
|
compatible = "simple-bus";
|
#address-cells = <1>;
|
#size-cells = <0>;
|
pinctrl-0 = <&pmx_power_hdd &pmx_usb_vbus>;
|
pinctrl-names = "default";
|
|
usb_power: regulator@1 {
|
compatible = "regulator-fixed";
|
reg = <1>;
|
regulator-name = "USB Power";
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
enable-active-high;
|
regulator-always-on;
|
regulator-boot-on;
|
gpio = <&gpio0 11 0>;
|
};
|
hdd_power: regulator@2 {
|
compatible = "regulator-fixed";
|
reg = <2>;
|
regulator-name = "HDD Power";
|
regulator-min-microvolt = <5000000>;
|
regulator-max-microvolt = <5000000>;
|
enable-active-high;
|
regulator-always-on;
|
regulator-boot-on;
|
gpio = <&gpio0 10 0>;
|
};
|
};
|
};
|
|
&mdio {
|
status = "okay";
|
|
ethphy1: ethernet-phy@8 {
|
reg = <8>;
|
};
|
};
|
|
ð1 {
|
status = "okay";
|
ethernet1-port@0 {
|
phy-handle = <ðphy1>;
|
};
|
};
|
