// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
/*
|
* Copyright 2016 Freescale Semiconductor, Inc.
|
* Copyright 2017-2018 NXP.
|
*
|
*/
|
|
#include <dt-bindings/clock/imx6sll-clock.h>
|
#include <dt-bindings/gpio/gpio.h>
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
#include "imx6sll-pinfunc.h"
|
|
/ {
|
#address-cells = <1>;
|
#size-cells = <1>;
|
|
aliases {
|
gpio0 = &gpio1;
|
gpio1 = &gpio2;
|
gpio2 = &gpio3;
|
gpio3 = &gpio4;
|
gpio4 = &gpio5;
|
gpio5 = &gpio6;
|
i2c0 = &i2c1;
|
i2c1 = &i2c2;
|
i2c2 = &i2c3;
|
mmc0 = &usdhc1;
|
mmc1 = &usdhc2;
|
mmc2 = &usdhc3;
|
serial0 = &uart1;
|
serial1 = &uart2;
|
serial2 = &uart3;
|
serial3 = &uart4;
|
serial4 = &uart5;
|
spi0 = &ecspi1;
|
spi1 = &ecspi2;
|
spi3 = &ecspi3;
|
spi4 = &ecspi4;
|
usb0 = &usbotg1;
|
usb1 = &usbotg2;
|
usbphy0 = &usbphy1;
|
usbphy1 = &usbphy2;
|
};
|
|
cpus {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
cpu0: cpu@0 {
|
compatible = "arm,cortex-a9";
|
device_type = "cpu";
|
reg = <0>;
|
next-level-cache = <&L2>;
|
operating-points =
|
/* kHz uV */
|
<996000 1275000>,
|
<792000 1175000>,
|
<396000 1075000>,
|
<198000 975000>;
|
fsl,soc-operating-points =
|
/* ARM kHz SOC-PU uV */
|
<996000 1175000>,
|
<792000 1175000>,
|
<396000 1175000>,
|
<198000 1175000>;
|
clock-latency = <61036>; /* two CLK32 periods */
|
#cooling-cells = <2>;
|
clocks = <&clks IMX6SLL_CLK_ARM>,
|
<&clks IMX6SLL_CLK_PLL2_PFD2>,
|
<&clks IMX6SLL_CLK_STEP>,
|
<&clks IMX6SLL_CLK_PLL1_SW>,
|
<&clks IMX6SLL_CLK_PLL1_SYS>;
|
clock-names = "arm", "pll2_pfd2_396m", "step",
|
"pll1_sw", "pll1_sys";
|
nvmem-cells = <&cpu_speed_grade>;
|
nvmem-cell-names = "speed_grade";
|
};
|
};
|
|
ckil: clock-ckil {
|
compatible = "fixed-clock";
|
#clock-cells = <0>;
|
clock-frequency = <32768>;
|
clock-output-names = "ckil";
|
};
|
|
osc: clock-osc-24m {
|
compatible = "fixed-clock";
|
#clock-cells = <0>;
|
clock-frequency = <24000000>;
|
clock-output-names = "osc";
|
};
|
|
ipp_di0: clock-ipp-di0 {
|
compatible = "fixed-clock";
|
#clock-cells = <0>;
|
clock-frequency = <0>;
|
clock-output-names = "ipp_di0";
|
};
|
|
ipp_di1: clock-ipp-di1 {
|
compatible = "fixed-clock";
|
#clock-cells = <0>;
|
clock-frequency = <0>;
|
clock-output-names = "ipp_di1";
|
};
|
|
soc {
|
#address-cells = <1>;
|
#size-cells = <1>;
|
compatible = "simple-bus";
|
interrupt-parent = <&gpc>;
|
ranges;
|
|
ocram: sram@900000 {
|
compatible = "mmio-sram";
|
reg = <0x00900000 0x20000>;
|
ranges = <0 0x00900000 0x20000>;
|
#address-cells = <1>;
|
#size-cells = <1>;
|
};
|
|
intc: interrupt-controller@a01000 {
|
compatible = "arm,cortex-a9-gic";
|
#interrupt-cells = <3>;
|
interrupt-controller;
|
reg = <0x00a01000 0x1000>,
|
<0x00a00100 0x100>;
|
interrupt-parent = <&intc>;
|
};
|
|
L2: cache-controller@a02000 {
|
compatible = "arm,pl310-cache";
|
reg = <0x00a02000 0x1000>;
|
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
cache-unified;
|
cache-level = <2>;
|
arm,tag-latency = <4 2 3>;
|
arm,data-latency = <4 2 3>;
|
};
|
|
aips1: bus@2000000 {
|
compatible = "fsl,aips-bus", "simple-bus";
|
#address-cells = <1>;
|
#size-cells = <1>;
|
reg = <0x02000000 0x100000>;
|
ranges;
|
|
spba: spba-bus@2000000 {
|
compatible = "fsl,spba-bus", "simple-bus";
|
#address-cells = <1>;
|
#size-cells = <1>;
|
reg = <0x02000000 0x40000>;
|
ranges;
|
|
spdif: spdif@2004000 {
|
compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif";
|
reg = <0x02004000 0x4000>;
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
dmas = <&sdma 14 18 0>, <&sdma 15 18 0>;
|
dma-names = "rx", "tx";
|
clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>,
|
<&clks IMX6SLL_CLK_OSC>,
|
<&clks IMX6SLL_CLK_SPDIF>,
|
<&clks IMX6SLL_CLK_DUMMY>,
|
<&clks IMX6SLL_CLK_DUMMY>,
|
<&clks IMX6SLL_CLK_DUMMY>,
|
<&clks IMX6SLL_CLK_IPG>,
|
<&clks IMX6SLL_CLK_DUMMY>,
|
<&clks IMX6SLL_CLK_DUMMY>,
|
<&clks IMX6SLL_CLK_SPBA>;
|
clock-names = "core", "rxtx0",
|
"rxtx1", "rxtx2",
|
"rxtx3", "rxtx4",
|
"rxtx5", "rxtx6",
|
"rxtx7", "dma";
|
status = "disabled";
|
};
|
|
ecspi1: spi@2008000 {
|
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
|
reg = <0x02008000 0x4000>;
|
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
|
dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
|
dma-names = "rx", "tx";
|
clocks = <&clks IMX6SLL_CLK_ECSPI1>,
|
<&clks IMX6SLL_CLK_ECSPI1>;
|
clock-names = "ipg", "per";
|
status = "disabled";
|
};
|
|
ecspi2: spi@200c000 {
|
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
|
reg = <0x0200c000 0x4000>;
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
|
dma-names = "rx", "tx";
|
clocks = <&clks IMX6SLL_CLK_ECSPI2>,
|
<&clks IMX6SLL_CLK_ECSPI2>;
|
clock-names = "ipg", "per";
|
status = "disabled";
|
};
|
|
ecspi3: spi@2010000 {
|
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
|
reg = <0x02010000 0x4000>;
|
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
|
dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
|
dma-names = "rx", "tx";
|
clocks = <&clks IMX6SLL_CLK_ECSPI3>,
|
<&clks IMX6SLL_CLK_ECSPI3>;
|
clock-names = "ipg", "per";
|
status = "disabled";
|
};
|
|
ecspi4: spi@2014000 {
|
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
|
reg = <0x02014000 0x4000>;
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
|
dma-names = "rx", "tx";
|
clocks = <&clks IMX6SLL_CLK_ECSPI4>,
|
<&clks IMX6SLL_CLK_ECSPI4>;
|
clock-names = "ipg", "per";
|
status = "disabled";
|
};
|
|
uart4: serial@2018000 {
|
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
|
"fsl,imx21-uart";
|
reg = <0x02018000 0x4000>;
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
|
dma-names = "rx", "tx";
|
clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
|
<&clks IMX6SLL_CLK_UART4_SERIAL>;
|
clock-names = "ipg", "per";
|
status = "disabled";
|
};
|
|
uart1: serial@2020000 {
|
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
|
"fsl,imx21-uart";
|
reg = <0x02020000 0x4000>;
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
|
dma-names = "rx", "tx";
|
clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
|
<&clks IMX6SLL_CLK_UART1_SERIAL>;
|
clock-names = "ipg", "per";
|
status = "disabled";
|
};
|
|
uart2: serial@2024000 {
|
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
|
"fsl,imx21-uart";
|
reg = <0x02024000 0x4000>;
|
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
|
dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
|
dma-names = "rx", "tx";
|
clocks = <&clks IMX6SLL_CLK_UART2_IPG>,
|
<&clks IMX6SLL_CLK_UART2_SERIAL>;
|
clock-names = "ipg", "per";
|
status = "disabled";
|
};
|
|
ssi1: ssi@2028000 {
|
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
|
reg = <0x02028000 0x4000>;
|
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
dmas = <&sdma 37 22 0>, <&sdma 38 22 0>;
|
dma-names = "rx", "tx";
|
fsl,fifo-depth = <15>;
|
clocks = <&clks IMX6SLL_CLK_SSI1_IPG>,
|
<&clks IMX6SLL_CLK_SSI1>;
|
clock-names = "ipg", "baud";
|
status = "disabled";
|
};
|
|
ssi2: ssi@202c000 {
|
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
|
reg = <0x0202c000 0x4000>;
|
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
dmas = <&sdma 41 22 0>, <&sdma 42 22 0>;
|
dma-names = "rx", "tx";
|
fsl,fifo-depth = <15>;
|
clocks = <&clks IMX6SLL_CLK_SSI2_IPG>,
|
<&clks IMX6SLL_CLK_SSI2>;
|
clock-names = "ipg", "baud";
|
status = "disabled";
|
};
|
|
ssi3: ssi@2030000 {
|
compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
|
reg = <0x02030000 0x4000>;
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
dmas = <&sdma 45 22 0>, <&sdma 46 22 0>;
|
dma-names = "rx", "tx";
|
fsl,fifo-depth = <15>;
|
clocks = <&clks IMX6SLL_CLK_SSI3_IPG>,
|
<&clks IMX6SLL_CLK_SSI3>;
|
clock-names = "ipg", "baud";
|
status = "disabled";
|
};
|
|
uart3: serial@2034000 {
|
compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
|
"fsl,imx21-uart";
|
reg = <0x02034000 0x4000>;
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
|
dma-name = "rx", "tx";
|
clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
|
<&clks IMX6SLL_CLK_UART3_SERIAL>;
|
clock-names = "ipg", "per";
|
status = "disabled";
|
};
|
};
|
|
pwm1: pwm@2080000 {
|
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
|
reg = <0x02080000 0x4000>;
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_PWM1>,
|
<&clks IMX6SLL_CLK_PWM1>;
|
clock-names = "ipg", "per";
|
#pwm-cells = <3>;
|
};
|
|
pwm2: pwm@2084000 {
|
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
|
reg = <0x02084000 0x4000>;
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_PWM2>,
|
<&clks IMX6SLL_CLK_PWM2>;
|
clock-names = "ipg", "per";
|
#pwm-cells = <3>;
|
};
|
|
pwm3: pwm@2088000 {
|
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
|
reg = <0x02088000 0x4000>;
|
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_PWM3>,
|
<&clks IMX6SLL_CLK_PWM3>;
|
clock-names = "ipg", "per";
|
#pwm-cells = <3>;
|
};
|
|
pwm4: pwm@208c000 {
|
compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm";
|
reg = <0x0208c000 0x4000>;
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_PWM4>,
|
<&clks IMX6SLL_CLK_PWM4>;
|
clock-names = "ipg", "per";
|
#pwm-cells = <3>;
|
};
|
|
gpt1: timer@2098000 {
|
compatible = "fsl,imx6sl-gpt";
|
reg = <0x02098000 0x4000>;
|
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_GPT_BUS>,
|
<&clks IMX6SLL_CLK_GPT_SERIAL>;
|
clock-names = "ipg", "per";
|
};
|
|
gpio1: gpio@209c000 {
|
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
|
reg = <0x0209c000 0x4000>;
|
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_GPIO1>;
|
gpio-controller;
|
#gpio-cells = <2>;
|
interrupt-controller;
|
#interrupt-cells = <2>;
|
gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
|
};
|
|
gpio2: gpio@20a0000 {
|
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
|
reg = <0x020a0000 0x4000>;
|
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_GPIO2>;
|
gpio-controller;
|
#gpio-cells = <2>;
|
interrupt-controller;
|
#interrupt-cells = <2>;
|
gpio-ranges = <&iomuxc 0 50 32>;
|
};
|
|
gpio3: gpio@20a4000 {
|
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
|
reg = <0x020a4000 0x4000>;
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_GPIO3>;
|
gpio-controller;
|
#gpio-cells = <2>;
|
interrupt-controller;
|
#interrupt-cells = <2>;
|
gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
|
<&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
|
<&iomuxc 21 6 11>;
|
};
|
|
gpio4: gpio@20a8000 {
|
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
|
reg = <0x020a8000 0x4000>;
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_GPIO4>;
|
gpio-controller;
|
#gpio-cells = <2>;
|
interrupt-controller;
|
#interrupt-cells = <2>;
|
gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
|
<&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
|
<&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
|
<&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
|
<&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
|
<&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
|
<&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
|
<&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
|
<&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
|
};
|
|
gpio5: gpio@20ac000 {
|
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
|
reg = <0x020ac000 0x4000>;
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_GPIO5>;
|
gpio-controller;
|
#gpio-cells = <2>;
|
interrupt-controller;
|
#interrupt-cells = <2>;
|
gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
|
<&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
|
<&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
|
<&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
|
<&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
|
<&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
|
<&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
|
<&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
|
<&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
|
<&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
|
<&iomuxc 21 137 1>;
|
};
|
|
gpio6: gpio@20b0000 {
|
compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio";
|
reg = <0x020b0000 0x4000>;
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_GPIO6>;
|
gpio-controller;
|
#gpio-cells = <2>;
|
interrupt-controller;
|
#interrupt-cells = <2>;
|
};
|
|
kpp: keypad@20b8000 {
|
compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp";
|
reg = <0x020b8000 0x4000>;
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_KPP>;
|
status = "disabled";
|
};
|
|
wdog1: watchdog@20bc000 {
|
compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
|
reg = <0x020bc000 0x4000>;
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_WDOG1>;
|
};
|
|
wdog2: watchdog@20c0000 {
|
compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt";
|
reg = <0x020c0000 0x4000>;
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_WDOG2>;
|
status = "disabled";
|
};
|
|
clks: clock-controller@20c4000 {
|
compatible = "fsl,imx6sll-ccm";
|
reg = <0x020c4000 0x4000>;
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
|
#clock-cells = <1>;
|
clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
|
clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
|
|
assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>;
|
assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>;
|
};
|
|
anatop: anatop@20c8000 {
|
compatible = "fsl,imx6sll-anatop",
|
"fsl,imx6q-anatop",
|
"syscon", "simple-mfd";
|
reg = <0x020c8000 0x4000>;
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
reg_3p0: regulator-3p0@20c8120 {
|
compatible = "fsl,anatop-regulator";
|
reg = <0x20c8120>;
|
regulator-name = "vdd3p0";
|
regulator-min-microvolt = <2625000>;
|
regulator-max-microvolt = <3400000>;
|
anatop-reg-offset = <0x120>;
|
anatop-vol-bit-shift = <8>;
|
anatop-vol-bit-width = <5>;
|
anatop-min-bit-val = <0>;
|
anatop-min-voltage = <2625000>;
|
anatop-max-voltage = <3400000>;
|
anatop-enable-bit = <0>;
|
};
|
|
tempmon: temperature-sensor {
|
compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
interrupt-parent = <&gpc>;
|
fsl,tempmon = <&anatop>;
|
nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
|
nvmem-cell-names = "calib", "temp_grade";
|
clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
|
};
|
};
|
|
usbphy1: usb-phy@20c9000 {
|
compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
|
"fsl,imx23-usbphy";
|
reg = <0x020c9000 0x1000>;
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_USBPHY1>;
|
phy-3p0-supply = <®_3p0>;
|
fsl,anatop = <&anatop>;
|
};
|
|
usbphy2: usb-phy@20ca000 {
|
compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
|
"fsl,imx23-usbphy";
|
reg = <0x020ca000 0x1000>;
|
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_USBPHY2>;
|
phy-3p0-supply = <®_3p0>;
|
fsl,anatop = <&anatop>;
|
};
|
|
snvs: snvs@20cc000 {
|
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
|
reg = <0x020cc000 0x4000>;
|
|
snvs_rtc: snvs-rtc-lp {
|
compatible = "fsl,sec-v4.0-mon-rtc-lp";
|
regmap = <&snvs>;
|
offset = <0x34>;
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
|
};
|
|
snvs_poweroff: snvs-poweroff {
|
compatible = "syscon-poweroff";
|
regmap = <&snvs>;
|
offset = <0x38>;
|
mask = <0x61>;
|
status = "disabled";
|
};
|
|
snvs_pwrkey: snvs-powerkey {
|
compatible = "fsl,sec-v4.0-pwrkey";
|
regmap = <&snvs>;
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
linux,keycode = <KEY_POWER>;
|
wakeup-source;
|
status = "disabled";
|
};
|
};
|
|
src: reset-controller@20d8000 {
|
compatible = "fsl,imx6sll-src", "fsl,imx51-src";
|
reg = <0x020d8000 0x4000>;
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
#reset-cells = <1>;
|
};
|
|
gpc: interrupt-controller@20dc000 {
|
compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc";
|
reg = <0x020dc000 0x4000>;
|
interrupt-controller;
|
#interrupt-cells = <3>;
|
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
interrupt-parent = <&intc>;
|
};
|
|
iomuxc: pinctrl@20e0000 {
|
compatible = "fsl,imx6sll-iomuxc";
|
reg = <0x020e0000 0x4000>;
|
};
|
|
gpr: iomuxc-gpr@20e4000 {
|
compatible = "fsl,imx6sll-iomuxc-gpr",
|
"fsl,imx6q-iomuxc-gpr", "syscon";
|
reg = <0x020e4000 0x4000>;
|
};
|
|
csi: csi@20e8000 {
|
compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi";
|
reg = <0x020e8000 0x4000>;
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_DUMMY>,
|
<&clks IMX6SLL_CLK_CSI>,
|
<&clks IMX6SLL_CLK_DUMMY>;
|
clock-names = "disp-axi", "csi_mclk", "disp_dcic";
|
status = "disabled";
|
};
|
|
sdma: dma-controller@20ec000 {
|
compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma";
|
reg = <0x020ec000 0x4000>;
|
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_IPG>,
|
<&clks IMX6SLL_CLK_SDMA>;
|
clock-names = "ipg", "ahb";
|
#dma-cells = <3>;
|
iram = <&ocram>;
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
|
};
|
|
pxp: pxp@20f0000 {
|
compatible = "fsl,imx6sll-pxp", "fsl,imx6ull-pxp";
|
reg = <0x20f0000 0x4000>;
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_PXP>;
|
clock-names = "axi";
|
};
|
|
lcdif: lcd-controller@20f8000 {
|
compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif";
|
reg = <0x020f8000 0x4000>;
|
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>,
|
<&clks IMX6SLL_CLK_LCDIF_APB>,
|
<&clks IMX6SLL_CLK_DUMMY>;
|
clock-names = "pix", "axi", "disp_axi";
|
status = "disabled";
|
};
|
|
dcp: crypto@20fc000 {
|
compatible = "fsl,imx28-dcp";
|
reg = <0x020fc000 0x4000>;
|
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_DCP>;
|
clock-names = "dcp";
|
};
|
};
|
|
aips2: bus@2100000 {
|
compatible = "fsl,aips-bus", "simple-bus";
|
#address-cells = <1>;
|
#size-cells = <1>;
|
reg = <0x02100000 0x100000>;
|
ranges;
|
|
usbotg1: usb@2184000 {
|
compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
|
"fsl,imx27-usb";
|
reg = <0x02184000 0x200>;
|
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_USBOH3>;
|
fsl,usbphy = <&usbphy1>;
|
fsl,usbmisc = <&usbmisc 0>;
|
fsl,anatop = <&anatop>;
|
ahb-burst-config = <0x0>;
|
tx-burst-size-dword = <0x10>;
|
rx-burst-size-dword = <0x10>;
|
status = "disabled";
|
};
|
|
usbotg2: usb@2184200 {
|
compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb",
|
"fsl,imx27-usb";
|
reg = <0x02184200 0x200>;
|
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_USBOH3>;
|
fsl,usbphy = <&usbphy2>;
|
fsl,usbmisc = <&usbmisc 1>;
|
ahb-burst-config = <0x0>;
|
tx-burst-size-dword = <0x10>;
|
rx-burst-size-dword = <0x10>;
|
status = "disabled";
|
};
|
|
usbmisc: usbmisc@2184800 {
|
#index-cells = <1>;
|
compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc",
|
"fsl,imx6q-usbmisc";
|
reg = <0x02184800 0x200>;
|
};
|
|
usdhc1: mmc@2190000 {
|
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
|
reg = <0x02190000 0x4000>;
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_USDHC1>,
|
<&clks IMX6SLL_CLK_USDHC1>,
|
<&clks IMX6SLL_CLK_USDHC1>;
|
clock-names = "ipg", "ahb", "per";
|
bus-width = <4>;
|
fsl,tuning-step = <2>;
|
fsl,tuning-start-tap = <20>;
|
status = "disabled";
|
};
|
|
usdhc2: mmc@2194000 {
|
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
|
reg = <0x02194000 0x4000>;
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_USDHC2>,
|
<&clks IMX6SLL_CLK_USDHC2>,
|
<&clks IMX6SLL_CLK_USDHC2>;
|
clock-names = "ipg", "ahb", "per";
|
bus-width = <4>;
|
fsl,tuning-step = <2>;
|
fsl,tuning-start-tap = <20>;
|
status = "disabled";
|
};
|
|
usdhc3: mmc@2198000 {
|
compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc";
|
reg = <0x02198000 0x4000>;
|
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_USDHC3>,
|
<&clks IMX6SLL_CLK_USDHC3>,
|
<&clks IMX6SLL_CLK_USDHC3>;
|
clock-names = "ipg", "ahb", "per";
|
bus-width = <4>;
|
fsl,tuning-step = <2>;
|
fsl,tuning-start-tap = <20>;
|
status = "disabled";
|
};
|
|
i2c1: i2c@21a0000 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
|
reg = <0x021a0000 0x4000>;
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_I2C1>;
|
status = "disabled";
|
};
|
|
i2c2: i2c@21a4000 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
|
reg = <0x021a4000 0x4000>;
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_I2C2>;
|
status = "disabled";
|
};
|
|
i2c3: i2c@21a8000 {
|
#address-cells = <1>;
|
#size-cells = <0>;
|
compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
|
reg = <0x021a8000 0x4000>;
|
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_I2C3>;
|
status = "disabled";
|
};
|
|
mmdc: memory-controller@21b0000 {
|
compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc";
|
reg = <0x021b0000 0x4000>;
|
clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>;
|
};
|
|
rngb: rng@21b4000 {
|
compatible = "fsl,imx6sll-rngb", "fsl,imx25-rngb";
|
reg = <0x021b4000 0x4000>;
|
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
|
clocks = <&clks IMX6SLL_CLK_DUMMY>;
|
};
|
|
ocotp: efuse@21bc000 {
|
#address-cells = <1>;
|
#size-cells = <1>;
|
compatible = "fsl,imx6sll-ocotp", "syscon";
|
reg = <0x021bc000 0x4000>;
|
clocks = <&clks IMX6SLL_CLK_OCOTP>;
|
|
cpu_speed_grade: speed-grade@10 {
|
reg = <0x10 4>;
|
};
|
|
tempmon_calib: calib@38 {
|
reg = <0x38 4>;
|
};
|
|
tempmon_temp_grade: temp-grade@20 {
|
reg = <0x20 4>;
|
};
|
};
|
|
audmux: audmux@21d8000 {
|
compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux";
|
reg = <0x021d8000 0x4000>;
|
status = "disabled";
|
};
|
|
uart5: serial@21f4000 {
|
compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart",
|
"fsl,imx21-uart";
|
reg = <0x021f4000 0x4000>;
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
|
dma-names = "rx", "tx";
|
clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
|
<&clks IMX6SLL_CLK_UART5_SERIAL>;
|
clock-names = "ipg", "per";
|
status = "disabled";
|
};
|
};
|
};
|
};
|
