// SPDX-License-Identifier: GPL-2.0
|
/*
|
* Hardkernel Odroid XU3/XU3-Lite/XU4 boards common device tree source
|
*
|
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
* http://www.samsung.com
|
* Copyright (c) 2014 Collabora Ltd.
|
* Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
|
* Anand Moon <linux.amoon@gmail.com>
|
*/
|
|
#include <dt-bindings/input/input.h>
|
#include "exynos5422-odroid-core.dtsi"
|
|
/ {
|
gpio_keys {
|
compatible = "gpio-keys";
|
pinctrl-names = "default";
|
pinctrl-0 = <&power_key>;
|
|
power_key {
|
/*
|
* The power button (SW2) is connected to the PWRON
|
* pin (active high) of the S2MPS11 PMIC, which acts
|
* as a 16ms debouce filter and signal inverter with
|
* output on ONOB pin (active low). ONOB PMIC pin is
|
* then connected to XEINT3 SoC pin.
|
*/
|
gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
|
linux,code = <KEY_POWER>;
|
label = "power key";
|
debounce-interval = <0>;
|
wakeup-source;
|
};
|
};
|
|
emmc_pwrseq: pwrseq {
|
pinctrl-0 = <&emmc_nrst_pin>;
|
pinctrl-names = "default";
|
compatible = "mmc-pwrseq-emmc";
|
reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
|
};
|
|
fan0: pwm-fan {
|
compatible = "pwm-fan";
|
pwms = <&pwm 0 20972 0>;
|
#cooling-cells = <2>;
|
cooling-levels = <0 130 170 230>;
|
};
|
|
thermal-zones {
|
cpu0_thermal: cpu0-thermal {
|
thermal-sensors = <&tmu_cpu0>;
|
polling-delay-passive = <250>;
|
polling-delay = <0>;
|
trips {
|
cpu0_alert0: cpu-alert-0 {
|
temperature = <50000>; /* millicelsius */
|
hysteresis = <5000>; /* millicelsius */
|
type = "active";
|
};
|
cpu0_alert1: cpu-alert-1 {
|
temperature = <60000>; /* millicelsius */
|
hysteresis = <5000>; /* millicelsius */
|
type = "active";
|
};
|
cpu0_alert2: cpu-alert-2 {
|
temperature = <70000>; /* millicelsius */
|
hysteresis = <5000>; /* millicelsius */
|
type = "active";
|
};
|
cpu0_crit0: cpu-crit-0 {
|
temperature = <120000>; /* millicelsius */
|
hysteresis = <0>; /* millicelsius */
|
type = "critical";
|
};
|
/*
|
* Exynos542x supports only 4 trip-points
|
* so for these polling mode is required.
|
* Start polling at temperature level of last
|
* interrupt-driven trip: cpu0_alert2
|
*/
|
cpu0_alert3: cpu-alert-3 {
|
temperature = <70000>; /* millicelsius */
|
hysteresis = <10000>; /* millicelsius */
|
type = "passive";
|
};
|
cpu0_alert4: cpu-alert-4 {
|
temperature = <85000>; /* millicelsius */
|
hysteresis = <10000>; /* millicelsius */
|
type = "passive";
|
};
|
};
|
cooling-maps {
|
map0 {
|
trip = <&cpu0_alert0>;
|
cooling-device = <&fan0 0 1>;
|
};
|
map1 {
|
trip = <&cpu0_alert1>;
|
cooling-device = <&fan0 1 2>;
|
};
|
map2 {
|
trip = <&cpu0_alert2>;
|
cooling-device = <&fan0 2 3>;
|
};
|
/*
|
* When reaching cpu0_alert3, reduce CPU
|
* by 2 steps. On Exynos5422/5800 that would
|
* (usually) be: 1800 MHz and 1200 MHz.
|
*/
|
map3 {
|
trip = <&cpu0_alert3>;
|
cooling-device = <&cpu0 0 2>,
|
<&cpu1 0 2>,
|
<&cpu2 0 2>,
|
<&cpu3 0 2>,
|
<&cpu4 0 2>,
|
<&cpu5 0 2>,
|
<&cpu6 0 2>,
|
<&cpu7 0 2>;
|
};
|
/*
|
* When reaching cpu0_alert4, reduce CPU
|
* further, down to 600 MHz (14 steps for big,
|
* 8 steps for LITTLE).
|
*/
|
cpu0_cooling_map4: map4 {
|
trip = <&cpu0_alert4>;
|
cooling-device = <&cpu0 3 8>,
|
<&cpu1 3 8>,
|
<&cpu2 3 8>,
|
<&cpu3 3 8>,
|
<&cpu4 3 14>,
|
<&cpu5 3 14>,
|
<&cpu6 3 14>,
|
<&cpu7 3 14>;
|
};
|
};
|
};
|
cpu1_thermal: cpu1-thermal {
|
thermal-sensors = <&tmu_cpu1>;
|
polling-delay-passive = <250>;
|
polling-delay = <0>;
|
trips {
|
cpu1_alert0: cpu-alert-0 {
|
temperature = <50000>;
|
hysteresis = <5000>;
|
type = "active";
|
};
|
cpu1_alert1: cpu-alert-1 {
|
temperature = <60000>;
|
hysteresis = <5000>;
|
type = "active";
|
};
|
cpu1_alert2: cpu-alert-2 {
|
temperature = <70000>;
|
hysteresis = <5000>;
|
type = "active";
|
};
|
cpu1_crit0: cpu-crit-0 {
|
temperature = <120000>;
|
hysteresis = <0>;
|
type = "critical";
|
};
|
cpu1_alert3: cpu-alert-3 {
|
temperature = <70000>;
|
hysteresis = <10000>;
|
type = "passive";
|
};
|
cpu1_alert4: cpu-alert-4 {
|
temperature = <85000>;
|
hysteresis = <10000>;
|
type = "passive";
|
};
|
};
|
cooling-maps {
|
map0 {
|
trip = <&cpu1_alert0>;
|
cooling-device = <&fan0 0 1>;
|
};
|
map1 {
|
trip = <&cpu1_alert1>;
|
cooling-device = <&fan0 1 2>;
|
};
|
map2 {
|
trip = <&cpu1_alert2>;
|
cooling-device = <&fan0 2 3>;
|
};
|
map3 {
|
trip = <&cpu1_alert3>;
|
cooling-device = <&cpu0 0 2>,
|
<&cpu1 0 2>,
|
<&cpu2 0 2>,
|
<&cpu3 0 2>,
|
<&cpu4 0 2>,
|
<&cpu5 0 2>,
|
<&cpu6 0 2>,
|
<&cpu7 0 2>;
|
};
|
cpu1_cooling_map4: map4 {
|
trip = <&cpu1_alert4>;
|
cooling-device = <&cpu0 3 8>,
|
<&cpu1 3 8>,
|
<&cpu2 3 8>,
|
<&cpu3 3 8>,
|
<&cpu4 3 14>,
|
<&cpu5 3 14>,
|
<&cpu6 3 14>,
|
<&cpu7 3 14>;
|
};
|
};
|
};
|
cpu2_thermal: cpu2-thermal {
|
thermal-sensors = <&tmu_cpu2>;
|
polling-delay-passive = <250>;
|
polling-delay = <0>;
|
trips {
|
cpu2_alert0: cpu-alert-0 {
|
temperature = <50000>;
|
hysteresis = <5000>;
|
type = "active";
|
};
|
cpu2_alert1: cpu-alert-1 {
|
temperature = <60000>;
|
hysteresis = <5000>;
|
type = "active";
|
};
|
cpu2_alert2: cpu-alert-2 {
|
temperature = <70000>;
|
hysteresis = <5000>;
|
type = "active";
|
};
|
cpu2_crit0: cpu-crit-0 {
|
temperature = <120000>;
|
hysteresis = <0>;
|
type = "critical";
|
};
|
cpu2_alert3: cpu-alert-3 {
|
temperature = <70000>;
|
hysteresis = <10000>;
|
type = "passive";
|
};
|
cpu2_alert4: cpu-alert-4 {
|
temperature = <85000>;
|
hysteresis = <10000>;
|
type = "passive";
|
};
|
};
|
cooling-maps {
|
map0 {
|
trip = <&cpu2_alert0>;
|
cooling-device = <&fan0 0 1>;
|
};
|
map1 {
|
trip = <&cpu2_alert1>;
|
cooling-device = <&fan0 1 2>;
|
};
|
map2 {
|
trip = <&cpu2_alert2>;
|
cooling-device = <&fan0 2 3>;
|
};
|
map3 {
|
trip = <&cpu2_alert3>;
|
cooling-device = <&cpu0 0 2>,
|
<&cpu1 0 2>,
|
<&cpu2 0 2>,
|
<&cpu3 0 2>,
|
<&cpu4 0 2>,
|
<&cpu5 0 2>,
|
<&cpu6 0 2>,
|
<&cpu7 0 2>;
|
};
|
cpu2_cooling_map4: map4 {
|
trip = <&cpu2_alert4>;
|
cooling-device = <&cpu0 3 8>,
|
<&cpu1 3 8>,
|
<&cpu2 3 8>,
|
<&cpu3 3 8>,
|
<&cpu4 3 14>,
|
<&cpu5 3 14>,
|
<&cpu6 3 14>,
|
<&cpu7 3 14>;
|
};
|
};
|
};
|
cpu3_thermal: cpu3-thermal {
|
thermal-sensors = <&tmu_cpu3>;
|
polling-delay-passive = <250>;
|
polling-delay = <0>;
|
trips {
|
cpu3_alert0: cpu-alert-0 {
|
temperature = <50000>;
|
hysteresis = <5000>;
|
type = "active";
|
};
|
cpu3_alert1: cpu-alert-1 {
|
temperature = <60000>;
|
hysteresis = <5000>;
|
type = "active";
|
};
|
cpu3_alert2: cpu-alert-2 {
|
temperature = <70000>;
|
hysteresis = <5000>;
|
type = "active";
|
};
|
cpu3_crit0: cpu-crit-0 {
|
temperature = <120000>;
|
hysteresis = <0>;
|
type = "critical";
|
};
|
cpu3_alert3: cpu-alert-3 {
|
temperature = <70000>;
|
hysteresis = <10000>;
|
type = "passive";
|
};
|
cpu3_alert4: cpu-alert-4 {
|
temperature = <85000>;
|
hysteresis = <10000>;
|
type = "passive";
|
};
|
};
|
cooling-maps {
|
map0 {
|
trip = <&cpu3_alert0>;
|
cooling-device = <&fan0 0 1>;
|
};
|
map1 {
|
trip = <&cpu3_alert1>;
|
cooling-device = <&fan0 1 2>;
|
};
|
map2 {
|
trip = <&cpu3_alert2>;
|
cooling-device = <&fan0 2 3>;
|
};
|
map3 {
|
trip = <&cpu3_alert3>;
|
cooling-device = <&cpu0 0 2>,
|
<&cpu1 0 2>,
|
<&cpu2 0 2>,
|
<&cpu3 0 2>,
|
<&cpu4 0 2>,
|
<&cpu5 0 2>,
|
<&cpu6 0 2>,
|
<&cpu7 0 2>;
|
};
|
cpu3_cooling_map4: map4 {
|
trip = <&cpu3_alert4>;
|
cooling-device = <&cpu0 3 8>,
|
<&cpu1 3 8>,
|
<&cpu2 3 8>,
|
<&cpu3 3 8>,
|
<&cpu4 3 14>,
|
<&cpu5 3 14>,
|
<&cpu6 3 14>,
|
<&cpu7 3 14>;
|
};
|
};
|
};
|
gpu_thermal: gpu-thermal {
|
thermal-sensors = <&tmu_gpu>;
|
polling-delay-passive = <250>;
|
polling-delay = <0>;
|
trips {
|
gpu_alert0: gpu-alert-0 {
|
temperature = <50000>;
|
hysteresis = <5000>;
|
type = "active";
|
};
|
gpu_alert1: gpu-alert-1 {
|
temperature = <60000>;
|
hysteresis = <5000>;
|
type = "active";
|
};
|
gpu_alert2: gpu-alert-2 {
|
temperature = <70000>;
|
hysteresis = <5000>;
|
type = "active";
|
};
|
gpu_crit0: gpu-crit-0 {
|
temperature = <120000>;
|
hysteresis = <0>;
|
type = "critical";
|
};
|
gpu_alert3: gpu-alert-3 {
|
temperature = <70000>;
|
hysteresis = <10000>;
|
type = "passive";
|
};
|
gpu_alert4: gpu-alert-4 {
|
temperature = <85000>;
|
hysteresis = <10000>;
|
type = "passive";
|
};
|
};
|
cooling-maps {
|
map0 {
|
trip = <&gpu_alert0>;
|
cooling-device = <&fan0 0 1>;
|
};
|
map1 {
|
trip = <&gpu_alert1>;
|
cooling-device = <&fan0 1 2>;
|
};
|
map2 {
|
trip = <&gpu_alert2>;
|
cooling-device = <&fan0 2 3>;
|
};
|
map3 {
|
trip = <&gpu_alert3>;
|
cooling-device = <&gpu 0 2>;
|
};
|
map4 {
|
trip = <&gpu_alert4>;
|
cooling-device = <&gpu 3 6>;
|
};
|
};
|
};
|
};
|
};
|
|
&buck10_reg {
|
/* Supplies vmmc-supply of mmc_0 */
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
&hdmi {
|
status = "okay";
|
ddc = <&i2c_2>;
|
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&hdmi_hpd_irq>;
|
|
vdd_osc-supply = <&ldo7_reg>;
|
vdd_pll-supply = <&ldo6_reg>;
|
vdd-supply = <&ldo6_reg>;
|
};
|
|
&hdmicec {
|
status = "okay";
|
needs-hpd;
|
};
|
|
&i2c_2 {
|
samsung,i2c-sda-delay = <100>;
|
samsung,i2c-max-bus-freq = <66000>;
|
/* used by HDMI DDC */
|
status = "okay";
|
};
|
|
&ldo26_reg {
|
regulator-min-microvolt = <3000000>;
|
regulator-max-microvolt = <3000000>;
|
regulator-always-on;
|
};
|
|
&mixer {
|
status = "okay";
|
};
|
|
&mmc_0 {
|
status = "okay";
|
mmc-pwrseq = <&emmc_pwrseq>;
|
card-detect-delay = <200>;
|
samsung,dw-mshc-ciu-div = <3>;
|
samsung,dw-mshc-sdr-timing = <0 4>;
|
samsung,dw-mshc-ddr-timing = <0 2>;
|
samsung,dw-mshc-hs400-timing = <0 2>;
|
samsung,read-strobe-delay = <90>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
|
bus-width = <8>;
|
cap-mmc-highspeed;
|
mmc-hs200-1_8v;
|
mmc-hs400-1_8v;
|
max-frequency = <200000000>;
|
vmmc-supply = <&ldo18_reg>;
|
vqmmc-supply = <&ldo3_reg>;
|
};
|
|
&pinctrl_0 {
|
power_key: power-key {
|
samsung,pins = "gpx0-3";
|
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
};
|
|
hdmi_hpd_irq: hdmi-hpd-irq {
|
samsung,pins = "gpx3-7";
|
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
|
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
};
|
};
|
|
&pinctrl_1 {
|
emmc_nrst_pin: emmc-nrst {
|
samsung,pins = "gpd1-0";
|
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
|
};
|
};
|
