// SPDX-License-Identifier: GPL-2.0
|
/*
|
* Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
|
* device tree source
|
*/
|
|
#include <dt-bindings/sound/samsung-i2s.h>
|
#include <dt-bindings/input/input.h>
|
#include <dt-bindings/clock/maxim,max77686.h>
|
#include "exynos4412.dtsi"
|
#include "exynos4412-ppmu-common.dtsi"
|
#include <dt-bindings/gpio/gpio.h>
|
#include "exynos-mfc-reserved-memory.dtsi"
|
|
/ {
|
chosen {
|
stdout-path = &serial_1;
|
};
|
|
firmware@204f000 {
|
compatible = "samsung,secure-firmware";
|
reg = <0x0204F000 0x1000>;
|
};
|
|
gpio_keys {
|
compatible = "gpio-keys";
|
pinctrl-names = "default";
|
pinctrl-0 = <&gpio_power_key>;
|
|
power_key {
|
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
|
linux,code = <KEY_POWER>;
|
label = "power key";
|
debounce-interval = <10>;
|
wakeup-source;
|
};
|
};
|
|
sound: sound {
|
compatible = "hardkernel,odroid-xu4-audio";
|
|
cpu {
|
sound-dai = <&i2s0 0>;
|
};
|
|
codec {
|
sound-dai = <&hdmi>, <&max98090>;
|
};
|
};
|
|
emmc_pwrseq: pwrseq {
|
pinctrl-0 = <&emmc_rstn>;
|
pinctrl-names = "default";
|
compatible = "mmc-pwrseq-emmc";
|
reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
|
};
|
|
fixed-rate-clocks {
|
xxti {
|
compatible = "samsung,clock-xxti";
|
clock-frequency = <0>;
|
};
|
|
xusbxti {
|
compatible = "samsung,clock-xusbxti";
|
clock-frequency = <24000000>;
|
};
|
};
|
};
|
|
&bus_dmc {
|
devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
|
vdd-supply = <&buck1_reg>;
|
status = "okay";
|
};
|
|
&bus_acp {
|
devfreq = <&bus_dmc>;
|
status = "okay";
|
};
|
|
&bus_c2c {
|
devfreq = <&bus_dmc>;
|
status = "okay";
|
};
|
|
&bus_leftbus {
|
devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
|
vdd-supply = <&buck3_reg>;
|
status = "okay";
|
};
|
|
&bus_rightbus {
|
devfreq = <&bus_leftbus>;
|
status = "okay";
|
};
|
|
&bus_display {
|
devfreq = <&bus_leftbus>;
|
status = "okay";
|
};
|
|
&bus_fsys {
|
devfreq = <&bus_leftbus>;
|
status = "okay";
|
};
|
|
&bus_peri {
|
devfreq = <&bus_leftbus>;
|
status = "okay";
|
};
|
|
&bus_mfc {
|
devfreq = <&bus_leftbus>;
|
status = "okay";
|
};
|
|
&camera {
|
status = "okay";
|
pinctrl-names = "default";
|
pinctrl-0 = <>;
|
};
|
|
&clock {
|
assigned-clocks = <&clock CLK_FOUT_EPLL>;
|
assigned-clock-rates = <45158401>;
|
};
|
|
&clock_audss {
|
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
|
<&clock_audss EXYNOS_MOUT_I2S>,
|
<&clock_audss EXYNOS_DOUT_SRP>,
|
<&clock_audss EXYNOS_DOUT_AUD_BUS>,
|
<&clock_audss EXYNOS_DOUT_I2S>;
|
|
assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
|
<&clock_audss EXYNOS_MOUT_AUDSS>;
|
|
assigned-clock-rates = <0>, <0>,
|
<196608001>,
|
<(196608001 / 2)>,
|
<(196608001 / 8)>;
|
};
|
|
&cpu0 {
|
cpu0-supply = <&buck2_reg>;
|
};
|
|
&cpu0_opp_table {
|
opp-1000000000 {
|
opp-suspend;
|
};
|
opp-800000000 {
|
/delete-property/opp-suspend;
|
};
|
};
|
|
&cpu_thermal {
|
cooling-maps {
|
cooling_map0: map0 {
|
/* Corresponds to 800MHz at freq_table */
|
cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
|
<&cpu2 7 7>, <&cpu3 7 7>;
|
};
|
cooling_map1: map1 {
|
/* Corresponds to 200MHz at freq_table */
|
cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
|
<&cpu2 13 13>, <&cpu3 13 13>;
|
};
|
};
|
};
|
|
&pinctrl_1 {
|
gpio_power_key: power_key {
|
samsung,pins = "gpx1-3";
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
};
|
|
max77686_irq: max77686-irq {
|
samsung,pins = "gpx3-2";
|
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
|
};
|
|
hdmi_hpd: hdmi-hpd {
|
samsung,pins = "gpx3-7";
|
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
|
};
|
|
emmc_rstn: emmc-rstn {
|
samsung,pins = "gpk1-2";
|
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
|
};
|
};
|
|
&ehci {
|
status = "okay";
|
};
|
|
&exynos_usbphy {
|
status = "okay";
|
};
|
|
&fimc_0 {
|
status = "okay";
|
assigned-clocks = <&clock CLK_MOUT_FIMC0>,
|
<&clock CLK_SCLK_FIMC0>;
|
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
|
assigned-clock-rates = <0>, <176000000>;
|
};
|
|
&fimc_1 {
|
status = "okay";
|
assigned-clocks = <&clock CLK_MOUT_FIMC1>,
|
<&clock CLK_SCLK_FIMC1>;
|
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
|
assigned-clock-rates = <0>, <176000000>;
|
};
|
|
&fimc_2 {
|
status = "okay";
|
assigned-clocks = <&clock CLK_MOUT_FIMC2>,
|
<&clock CLK_SCLK_FIMC2>;
|
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
|
assigned-clock-rates = <0>, <176000000>;
|
};
|
|
&fimc_3 {
|
status = "okay";
|
assigned-clocks = <&clock CLK_MOUT_FIMC3>,
|
<&clock CLK_SCLK_FIMC3>;
|
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
|
assigned-clock-rates = <0>, <176000000>;
|
};
|
|
&gpu {
|
mali-supply = <&buck4_reg>;
|
status = "okay";
|
};
|
|
&hdmi {
|
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&hdmi_hpd>;
|
vdd-supply = <&ldo8_reg>;
|
vdd_osc-supply = <&ldo10_reg>;
|
vdd_pll-supply = <&ldo8_reg>;
|
ddc = <&i2c_2>;
|
status = "okay";
|
};
|
|
&hdmicec {
|
status = "okay";
|
};
|
|
&hsotg {
|
dr_mode = "peripheral";
|
status = "okay";
|
vusb_d-supply = <&ldo15_reg>;
|
vusb_a-supply = <&ldo12_reg>;
|
};
|
|
&i2c_0 {
|
samsung,i2c-sda-delay = <100>;
|
samsung,i2c-max-bus-freq = <400000>;
|
status = "okay";
|
|
usb3503: usb3503@8 {
|
compatible = "smsc,usb3503";
|
reg = <0x08>;
|
|
intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
|
connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
|
reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
|
initial-mode = <1>;
|
};
|
|
max77686: pmic@9 {
|
compatible = "maxim,max77686";
|
interrupt-parent = <&gpx3>;
|
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&max77686_irq>;
|
reg = <0x09>;
|
#clock-cells = <1>;
|
|
voltage-regulators {
|
ldo1_reg: LDO1 {
|
regulator-name = "VDD_ALIVE_1.0V";
|
regulator-min-microvolt = <1000000>;
|
regulator-max-microvolt = <1000000>;
|
regulator-always-on;
|
};
|
|
ldo2_reg: LDO2 {
|
regulator-name = "VDDQ_M1_2_1.8V";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-always-on;
|
};
|
|
ldo3_reg: LDO3 {
|
regulator-name = "VDDQ_EXT_1.8V";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-always-on;
|
};
|
|
ldo4_reg: LDO4 {
|
regulator-name = "VDDQ_MMC2_2.8V";
|
regulator-min-microvolt = <2800000>;
|
regulator-max-microvolt = <2800000>;
|
regulator-boot-on;
|
};
|
|
ldo5_reg: LDO5 {
|
regulator-name = "VDDQ_MMC1_3_1.8V";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
ldo6_reg: LDO6 {
|
regulator-name = "VDD10_MPLL_1.0V";
|
regulator-min-microvolt = <1000000>;
|
regulator-max-microvolt = <1000000>;
|
regulator-always-on;
|
};
|
|
ldo7_reg: LDO7 {
|
regulator-name = "VDD10_XPLL_1.0V";
|
regulator-min-microvolt = <1000000>;
|
regulator-max-microvolt = <1000000>;
|
regulator-always-on;
|
};
|
|
ldo8_reg: LDO8 {
|
regulator-name = "VDD10_HDMI_1.0V";
|
regulator-min-microvolt = <1000000>;
|
regulator-max-microvolt = <1000000>;
|
};
|
|
ldo10_reg: LDO10 {
|
regulator-name = "VDDQ_MIPIHSI_1.8V";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
};
|
|
ldo11_reg: LDO11 {
|
regulator-name = "VDD18_ABB1_1.8V";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-always-on;
|
};
|
|
ldo12_reg: LDO12 {
|
regulator-name = "VDD33_USB_3.3V";
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
ldo13_reg: LDO13 {
|
regulator-name = "VDDQ_C2C_W_1.8V";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
ldo14_reg: LDO14 {
|
regulator-name = "VDD18_ABB0_2_1.8V";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
ldo15_reg: LDO15 {
|
regulator-name = "VDD10_HSIC_1.0V";
|
regulator-min-microvolt = <1000000>;
|
regulator-max-microvolt = <1000000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
ldo16_reg: LDO16 {
|
regulator-name = "VDD18_HSIC_1.8V";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
ldo20_reg: LDO20 {
|
regulator-name = "LDO20_1.8V";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
};
|
|
ldo21_reg: LDO21 {
|
regulator-name = "TFLASH_2.8V";
|
regulator-min-microvolt = <2800000>;
|
regulator-max-microvolt = <2800000>;
|
regulator-boot-on;
|
};
|
|
ldo22_reg: LDO22 {
|
/*
|
* Only U3 uses it, so let it define the
|
* constraints
|
*/
|
regulator-name = "LDO22";
|
regulator-boot-on;
|
};
|
|
ldo25_reg: LDO25 {
|
regulator-name = "VDDQ_LCD_1.8V";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
buck1_reg: BUCK1 {
|
regulator-name = "VDD_MIF";
|
regulator-min-microvolt = <900000>;
|
regulator-max-microvolt = <1100000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
buck2_reg: BUCK2 {
|
regulator-name = "VDD_ARM";
|
regulator-min-microvolt = <900000>;
|
regulator-max-microvolt = <1350000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
buck3_reg: BUCK3 {
|
regulator-name = "VDD_INT";
|
regulator-min-microvolt = <900000>;
|
regulator-max-microvolt = <1050000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
buck4_reg: BUCK4 {
|
regulator-name = "VDD_G3D";
|
regulator-min-microvolt = <900000>;
|
regulator-max-microvolt = <1100000>;
|
regulator-microvolt-offset = <50000>;
|
};
|
|
buck5_reg: BUCK5 {
|
regulator-name = "VDDQ_CKEM1_2_1.2V";
|
regulator-min-microvolt = <1200000>;
|
regulator-max-microvolt = <1200000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
buck6_reg: BUCK6 {
|
regulator-name = "BUCK6_1.35V";
|
regulator-min-microvolt = <1350000>;
|
regulator-max-microvolt = <1350000>;
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
buck7_reg: BUCK7 {
|
regulator-name = "BUCK7_2.0V";
|
regulator-min-microvolt = <2000000>;
|
regulator-max-microvolt = <2000000>;
|
regulator-always-on;
|
};
|
|
buck8_reg: BUCK8 {
|
/*
|
* Constraints set by specific board: X,
|
* X2 and U3.
|
*/
|
regulator-name = "BUCK8_2.8V";
|
};
|
};
|
};
|
};
|
|
&i2c_1 {
|
status = "okay";
|
max98090: max98090@10 {
|
compatible = "maxim,max98090";
|
reg = <0x10>;
|
interrupt-parent = <&gpx0>;
|
interrupts = <0 IRQ_TYPE_NONE>;
|
clocks = <&i2s0 CLK_I2S_CDCLK>;
|
clock-names = "mclk";
|
#sound-dai-cells = <0>;
|
};
|
};
|
|
&i2c_2 {
|
status = "okay";
|
};
|
|
&i2c_8 {
|
status = "okay";
|
};
|
|
&i2s0 {
|
pinctrl-0 = <&i2s0_bus>;
|
pinctrl-names = "default";
|
status = "okay";
|
assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
|
assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>;
|
};
|
|
&mixer {
|
status = "okay";
|
};
|
|
&mshc_0 {
|
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
|
pinctrl-names = "default";
|
vmmc-supply = <&ldo20_reg>;
|
mmc-pwrseq = <&emmc_pwrseq>;
|
status = "okay";
|
|
broken-cd;
|
card-detect-delay = <200>;
|
samsung,dw-mshc-ciu-div = <3>;
|
samsung,dw-mshc-sdr-timing = <2 3>;
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
bus-width = <8>;
|
cap-mmc-highspeed;
|
};
|
|
&rtc {
|
status = "okay";
|
clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
|
clock-names = "rtc", "rtc_src";
|
};
|
|
&sdhci_2 {
|
bus-width = <4>;
|
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
|
pinctrl-names = "default";
|
vmmc-supply = <&ldo21_reg>;
|
vqmmc-supply = <&ldo4_reg>;
|
cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>;
|
status = "okay";
|
};
|
|
&serial_0 {
|
status = "okay";
|
};
|
|
&serial_1 {
|
status = "okay";
|
};
|
|
&tmu {
|
vtmu-supply = <&ldo10_reg>;
|
status = "okay";
|
};
|
