* Omnivision OV5695 MIPI CSI-2 sensor
|
|
Required Properties:
|
- compatible: shall be "ovti,ov5695"
|
- clocks: reference to the xvclk input clock
|
- clock-names: shall be "xvclk"
|
- avdd-supply: Analog voltage supply, 2.8 volts
|
- dovdd-supply: Digital I/O voltage supply, 1.8 volts
|
- dvdd-supply: Digital core voltage supply, 1.2 volts
|
- reset-gpios: Low active reset gpio
|
|
The device node shall contain one 'port' child node with an
|
'endpoint' subnode for its digital output video port,
|
in accordance with the video interface bindings defined in
|
Documentation/devicetree/bindings/media/video-interfaces.txt.
|
The endpoint optional property 'data-lanes' shall be "<1 2>".
|
|
Example:
|
&i2c7 {
|
ov5695: camera-sensor@36 {
|
compatible = "ovti,ov5695";
|
reg = <0x36>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&clk_24m_cam>;
|
|
clocks = <&cru SCLK_TESTCLKOUT1>;
|
clock-names = "xvclk";
|
|
avdd-supply = <&pp2800_cam>;
|
dovdd-supply = <&pp1800>;
|
dvdd-supply = <&pp1250_cam>;
|
reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
|
|
port {
|
wcam_out: endpoint {
|
remote-endpoint = <&mipi_in_wcam>;
|
data-lanes = <1 2>;
|
};
|
};
|
};
|
};
|
