#ping = 172.31.14.1
|
#ping = 172.26.1.255
|
#interface = eth0
|
#file = /var/log/messages
|
#change = 1407
|
|
# Uncomment to enable test. Setting one of these values to '0' disables it.
|
# These values will hopefully never reboot your machine during normal use
|
# (if your machine is really hung, the loadavg will go much higher than 25)
|
#max-load-1 = 24
|
#max-load-5 = 18
|
#max-load-15 = 12
|
|
# Note that this is the number of pages!
|
# To get the real size, check how large the pagesize is on your machine.
|
#min-memory = 1
|
|
#repair-binary = /usr/sbin/repair
|
#repair-timeout =
|
#test-binary =
|
#test-timeout =
|
|
watchdog-device = /dev/watchdog
|
|
# Defaults compiled into the binary
|
#temperature-device =
|
#max-temperature = 120
|
|
# Defaults compiled into the binary
|
#admin = root
|
#interval = 1
|
#logtick = 1
|
#log-dir = /var/log/watchdog
|
|
# This greatly decreases the chance that watchdog won't be scheduled before
|
# your machine is really loaded
|
realtime = yes
|
priority = 1
|
|
# Check if rsyslogd is still running by enabling the following line
|
#pidfile = /var/run/rsyslogd.pid
|
