#!/bin/sh
|
|
SSID=
|
WIFISSID=$1
|
WIFIPWD=$2
|
VSSID=
|
VPWD=
|
VVAILD=
|
IPADDR=
|
NETMASK=
|
WPAPID=""
|
NETMASK=
|
GW=
|
DNS=
|
up_cnt=0
|
insmod_cnt=0
|
check_cnt=0
|
FORCE_CONFIG_WIFI=$3
|
NEW_SSID=
|
getdhcp_cnt=0
|
connect_cnt=0
|
wpa_cnt=0
|
NET_NEW_CONFIG=0
|
IPADDR_TEST=
|
tcpka_cnt=0
|
|
trap "echo 'ifconfig wlan0 down'; ifconfig wlan0 down; exit" SIGTERM
|
|
function udhcpcd() {
|
echo "udhcpc ..."
|
|
if [ "$NET_NEW_CONFIG" == "0" ];then
|
echo "get dhcp info from vendor"
|
IPADDR=`vendor_storage -r VENDOR_CUSTOM_ID_1E -t string | sed -n '4p' | awk '{print $3}' | awk -F, '{print $4}'`
|
NETMASK=`vendor_storage -r VENDOR_CUSTOM_ID_1E -t string | sed -n '4p' | awk '{print $3}' | awk -F, '{print $5}'`
|
GW=`vendor_storage -r VENDOR_CUSTOM_ID_1E -t string | sed -n '4p' | awk '{print $3}' | awk -F, '{print $6}'`
|
DNS=`vendor_storage -r VENDOR_CUSTOM_ID_1E -t string | sed -n '4p' | awk '{print $3}' | awk -F, '{print $7}'`
|
|
ifconfig wlan0 $IPADDR netmask $NETMASK
|
route add default gw $GW
|
echo "nameserver $DNS" > /etc/resolv.conf
|
echo $IPADDR $NETMASK $GW $DNS
|
echo none > /sys/class/leds/blue/trigger
|
echo 5 > /sys/class/leds/blue/brightness
|
wl PM 0
|
exit
|
fi
|
|
echo "get dhcp by udhcpc"
|
udhcpc -i wlan0 -t 15 -q
|
|
IPADDR_TEST=`ifconfig wlan0 | grep inet | awk '{print $2}' | awk -F: '{print $2}' | awk -F. '{print $1}'`
|
if [ "$IPADDR_TEST" != "" ] && [ "$IPADDR_TEST" != "127" ] && [ "$IPADDR_TEST" != "169" ];then
|
IPADDR=`ifconfig wlan0 | grep inet | awk '{print $2}' | awk -F: '{print $2}'`
|
NETMASK=`ifconfig wlan0 | grep inet | awk '{print $4}' | awk -F: '{print $2}'`
|
GW=`route -n | awk '{print $2}' | sed -n '3p'`
|
DNS=`cat /etc/resolv.conf | grep nameserver | awk '{print $2}'`
|
echo "ip_info: $IPADDR $NETMASK $GW $DNS"
|
vendor_storage -w VENDOR_CUSTOM_ID_1E -t string -i 1,$WIFISSID,$WIFIPWD,$IPADDR,$NETMASK,$GW,$DNS
|
echo none > /sys/class/leds/blue/trigger
|
echo 5 > /sys/class/leds/blue/brightness
|
wl PM 0
|
else
|
echo "dhcp failed !!!"
|
echo 0 > /sys/class/leds/blue/brightness
|
exit
|
fi
|
}
|
|
function getdhcp() {
|
while true
|
do
|
IPADDR=`dhd_priv wl dhcpc_dump | awk '{print $5}' | sed -n '3p'`
|
if [ "$IPADDR" != "0.0.0.0" ];then
|
NETMASK=`dhd_priv wl dhcpc_dump | awk '{print $7}' | sed -n '3p'`
|
GW=`dhd_priv wl dhcpc_dump | awk '{print $9}' | sed -n '3p'`
|
DNS=`dhd_priv wl dhcpc_dump | awk '{print $11}' | sed -n '3p'`
|
|
ifconfig wlan0 $IPADDR netmask $NETMASK
|
route add default gw $GW
|
echo "nameserver $DNS" > /etc/resolv.conf
|
|
echo $IPADDR $NETMASK $GW $DNS
|
echo none > /sys/class/leds/blue/trigger
|
echo 5 > /sys/class/leds/blue/brightness
|
|
if [ "$FORCE_CONFIG_WIFI" == "true" ];then
|
echo "reconnect, restart mediaserver..."
|
killall -9 mediaserver
|
sleep 1
|
mediaserver -a -d -c /usr/share/mediaserver/tb.conf > /dev/kmsg 2>&1 &
|
fi
|
|
break
|
fi
|
|
sleep 0.01
|
|
let getdhcp_cnt++
|
if [ "$getdhcp_cnt" -gt 3000 ]; then
|
echo "$NEW_SSID getdhcp failed!!!"
|
echo 0 > /sys/class/leds/blue/brightness
|
exit
|
fi
|
done
|
}
|
|
function check_wlan0() {
|
echo "check wlan0 ..."
|
while true
|
do
|
lsmod | grep bcmdhd
|
if [ $? -ne 0 ]; then
|
echo "wait bcmdhd.ko ..."
|
sleep .2
|
else
|
echo "ismod bcmdhd.ko okay"
|
break
|
fi
|
|
let insmod_cnt++
|
if [ "$insmod_cnt" -gt 3 ]; then
|
echo "insmod failed !!!"
|
echo 0 > /sys/class/leds/blue/brightness
|
exit
|
fi
|
done
|
|
while true
|
do
|
ifconfig -a wlan0 | grep wlan0
|
if [ $? -ne 0 ]; then
|
echo "wait wlan0 ..."
|
sleep .2
|
else
|
echo "wlan0 exist"
|
break
|
fi
|
|
let check_cnt++
|
if [ "$check_cnt" -gt 3 ]; then
|
echo "check wlan0 failed!!!"
|
echo 0 > /sys/class/leds/blue/brightness
|
exit
|
fi
|
done
|
}
|
|
function check_wakeup_cause() {
|
echo "check_wakeup_cause ..."
|
CAUSE=`dhd_priv wl wowl_wakeind | awk -F= '{print $3}' | sed -n '3p' | cut -d ' ' -f 1`
|
if [ "$CAUSE" != "0x0" ]; then
|
touch /tmp/wifi_wake
|
fi
|
}
|
|
function tcpka_del() {
|
echo "tcpka_del ..."
|
while true
|
do
|
IPID=`dhd_priv wl tcpka_conn_sess_info 1 | grep ipid`
|
if [ "$IPID" != "" ]; then
|
sleep 0.05
|
dhd_priv wl tcpka_conn_enable 1 0 0 0 0
|
sleep 0.05
|
dhd_priv wl tcpka_conn_del 1
|
sleep 0.05
|
else
|
break
|
fi
|
|
let tcpka_cnt++
|
if [ "$tcpka_cnt" -gt 3 ]; then
|
echo "tcpka_conn_del failed"
|
exit
|
fi
|
|
done
|
}
|
|
function wlan_up() {
|
echo "wlan up ..."
|
while true
|
do
|
ifconfig wlan0 up
|
if [ $? -ne 0 ]; then
|
echo "wlan0 up failed"
|
sleep 0.1
|
else
|
echo "wlan0 up succeed"
|
break
|
fi
|
|
let up_cnt++
|
if [ "$up_cnt" -gt 3 ]; then
|
echo "wlan0 up failed!!!"
|
echo 0 > /sys/class/leds/blue/brightness
|
exit
|
fi
|
done
|
}
|
|
function connect_wifi() {
|
echo "connect wifi ..."
|
SSID=`dhd_priv isam_status | awk -F, '{print $5}' | sed -n '4p' | cut -d '"' -f 2`
|
|
if [ "$SSID" == "" ] || [ "$FORCE_CONFIG_WIFI" == "true" ];then
|
|
if [ "$FORCE_CONFIG_WIFI" != "true" ];then
|
|
VVAILD=`vendor_storage -r VENDOR_CUSTOM_ID_1E -t string | sed -n '4p' | awk '{print $3}' | awk -F, '{print $1}'`
|
echo "vvaild: $VVAILD"
|
VSSID=`vendor_storage -r VENDOR_CUSTOM_ID_1E -t string | sed -n '4p' | awk '{print $3}' | awk -F, '{print $2}'`
|
echo "vssid: $VSSID"
|
VPSK=`vendor_storage -r VENDOR_CUSTOM_ID_1E -t string | sed -n '4p' | awk '{print $3}' | awk -F, '{print $3}'`
|
echo "vpsk: $VPSK"
|
|
if [ "$VVAILD" == "1" ];then
|
WIFISSID=$VSSID
|
WIFIPWD=$VPSK
|
fi
|
|
echo "vendor storage: vaild: $VVAILD ssid: $WIFISSID, psk: $WIFIPWD"
|
fi
|
|
if [ "$SSID" == "" ] && [ "$FORCE_CONFIG_WIFI" != "true" ] && [ "$VVAILD" != "1" ];then
|
echo "SSID is empty, and FORCE_CONFIG_WIFI not true and vendor is empty, exit"
|
echo 0 > /sys/class/leds/blue/brightness
|
exit
|
fi
|
|
if [ "$SSID" == "$WIFISSID" ];then
|
echo "$WIFISSID already connected"
|
return
|
fi
|
|
echo "WIFI INFO: $SSID, CONFIG: $FORCE_CONFIG_WIFI"
|
cp /etc/wpa_supplicant.conf /tmp/
|
echo "connect to WiFi ssid: $WIFISSID, Passwd: $WIFIPWD"
|
sed -i "s/SSID/$WIFISSID/g" /tmp/wpa_supplicant.conf
|
sed -i "s/PASSWORD/$WIFIPWD/g" /tmp/wpa_supplicant.conf
|
|
WPAPID=`busybox ps | grep wpa_supplicant | grep -v grep | awk '{print $1}'`
|
if [ "$WPAPID" != "" ];then
|
killall wpa_supplicant
|
sleep 0.5
|
fi
|
|
ifconfig wlan0 down
|
sleep 0.5
|
ifconfig wlan0 up
|
sleep 0.5
|
|
while true
|
do
|
wpa_supplicant -B -i wlan0 -c /tmp/wpa_supplicant.conf
|
WPAPID=`busybox ps | grep wpa_supplicant | grep -v grep | awk '{print $1}'`
|
if [ "$WPAPID" == "" ];then
|
sleep 0.2
|
else
|
echo "wpa_supplicant running"
|
break
|
fi
|
|
let wpa_cnt++
|
if [ "$wpa_cnt" -gt 3 ]; then
|
echo "wpa_supplicant up failed!!!"
|
echo 0 > /sys/class/leds/blue/brightness
|
exit
|
fi
|
done
|
|
while true
|
do
|
NEW_SSID=`dhd_priv isam_status | awk -F, '{print $5}' | sed -n '4p' | cut -d '"' -f 2`
|
if [ "$NEW_SSID" == "" ];then
|
echo "$WIFISSID connecting..."
|
sleep 1
|
elif [ "$NEW_SSID" == "$SSID" ];then
|
echo "waiting $SSID disconnect ..."
|
sleep 1
|
else [ "$NEW_SSID" == "$WIFISSID" ]
|
echo "$NEW_SSID connected to getdhcp"
|
NET_NEW_CONFIG=1
|
break
|
fi
|
|
let connect_cnt++
|
if [ "$connect_cnt" -gt 35 ]; then
|
echo "connect $NEW_SSID failed!!!"
|
echo 0 > /sys/class/leds/blue/brightness
|
exit
|
fi
|
done
|
fi
|
}
|
|
check_wlan0
|
wlan_up
|
check_wakeup_cause
|
tcpka_del
|
connect_wifi
|
udhcpcd
|
