hc
2023-11-06 1622ff3442ff6aecc1f538cda437379d1f6a4a93
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
STMicroelectronics STM32 SPI/I2S Controller
 
The SPI/I2S block supports I2S/PCM protocols when configured on I2S mode.
Only some SPI instances support I2S.
 
Required properties:
  - compatible: Must be "st,stm32h7-i2s"
  - reg: Offset and length of the device's register set.
  - interrupts: Must contain the interrupt line id.
  - clocks: Must contain phandle and clock specifier pairs for each entry
   in clock-names.
  - clock-names: Must contain "i2sclk", "pclk", "x8k" and "x11k".
   "i2sclk": clock which feeds the internal clock generator
   "pclk": clock which feeds the peripheral bus interface
   "x8k": I2S parent clock for sampling rates multiple of 8kHz.
   "x11k": I2S parent clock for sampling rates multiple of 11.025kHz.
  - dmas: DMA specifiers for tx and rx dma.
    See Documentation/devicetree/bindings/dma/stm32-dma.txt.
  - dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
  - pinctrl-names: should contain only value "default"
  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
 
Optional properties:
  - resets: Reference to a reset controller asserting the reset controller
 
The device node should contain one 'port' child node with one child 'endpoint'
node, according to the bindings defined in Documentation/devicetree/bindings/
graph.txt.
 
Example:
sound_card {
   compatible = "audio-graph-card";
   dais = <&i2s2_port>;
};
 
i2s2: audio-controller@40003800 {
   compatible = "st,stm32h7-i2s";
   reg = <0x40003800 0x400>;
   interrupts = <36>;
   clocks = <&rcc PCLK1>, <&rcc SPI2_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
   clock-names = "pclk", "i2sclk",  "x8k", "x11k";
   dmas = <&dmamux2 2 39 0x400 0x1>,
           <&dmamux2 3 40 0x400 0x1>;
   dma-names = "rx", "tx";
   pinctrl-names = "default";
   pinctrl-0 = <&pinctrl_i2s2>;
 
   i2s2_port: port@0 {
       cpu_endpoint: endpoint {
           remote-endpoint = <&codec_endpoint>;
           format = "i2s";
       };
   };
};
 
audio-codec {
   codec_port: port@0 {
       codec_endpoint: endpoint {
           remote-endpoint = <&cpu_endpoint>;
       };
   };
};