* ROHM BD70528 Power Management Integrated Circuit bindings
|
|
BD70528MWV is an ultra-low quiescent current general purpose, single-chip,
|
power management IC for battery-powered portable devices. The IC
|
integrates 3 ultra-low current consumption buck converters, 3 LDOs and 2
|
LED Drivers. Also included are 4 GPIOs, a real-time clock (RTC), a 32kHz
|
clock gate, high-accuracy VREF for use with an external ADC, flexible
|
dual-input power path, 10 bit SAR ADC for battery temperature monitor and
|
1S battery charger with scalable charge currents.
|
|
Required properties:
|
- compatible : Should be "rohm,bd70528"
|
- reg : I2C slave address.
|
- interrupts : The interrupt line the device is connected to.
|
- interrupt-controller : To indicate BD70528 acts as an interrupt controller.
|
- #interrupt-cells : Should be 2. Usage is compliant to the 2 cells
|
variant of ../interrupt-controller/interrupts.txt
|
- gpio-controller : To indicate BD70528 acts as a GPIO controller.
|
- #gpio-cells : Should be 2. The first cell is the pin number and
|
the second cell is used to specify flags. See
|
../gpio/gpio.txt for more information.
|
- #clock-cells : Should be 0.
|
- regulators: : List of child nodes that specify the regulators.
|
Please see ../regulator/rohm,bd70528-regulator.txt
|
|
Optional properties:
|
- clock-output-names : Should contain name for output clock.
|
|
Example:
|
/* External oscillator */
|
osc: oscillator {
|
compatible = "fixed-clock";
|
#clock-cells = <1>;
|
clock-frequency = <32768>;
|
clock-output-names = "osc";
|
};
|
|
pmic: pmic@4b {
|
compatible = "rohm,bd70528";
|
reg = <0x4b>;
|
interrupt-parent = <&gpio1>;
|
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
clocks = <&osc 0>;
|
#clock-cells = <0>;
|
clock-output-names = "bd70528-32k-out";
|
#gpio-cells = <2>;
|
gpio-controller;
|
interrupt-controller;
|
#interrupt-cells = <2>;
|
|
regulators {
|
buck1: BUCK1 {
|
regulator-name = "buck1";
|
regulator-min-microvolt = <1200000>;
|
regulator-max-microvolt = <3400000>;
|
regulator-boot-on;
|
regulator-ramp-delay = <125>;
|
};
|
buck2: BUCK2 {
|
regulator-name = "buck2";
|
regulator-min-microvolt = <1200000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-boot-on;
|
regulator-ramp-delay = <125>;
|
};
|
buck3: BUCK3 {
|
regulator-name = "buck3";
|
regulator-min-microvolt = <800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-boot-on;
|
regulator-ramp-delay = <250>;
|
};
|
ldo1: LDO1 {
|
regulator-name = "ldo1";
|
regulator-min-microvolt = <1650000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-boot-on;
|
};
|
ldo2: LDO2 {
|
regulator-name = "ldo2";
|
regulator-min-microvolt = <1650000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-boot-on;
|
};
|
|
ldo3: LDO3 {
|
regulator-name = "ldo3";
|
regulator-min-microvolt = <1650000>;
|
regulator-max-microvolt = <3300000>;
|
};
|
led_ldo1: LED_LDO1 {
|
regulator-name = "led_ldo1";
|
regulator-min-microvolt = <200000>;
|
regulator-max-microvolt = <300000>;
|
};
|
led_ldo2: LED_LDO2 {
|
regulator-name = "led_ldo2";
|
regulator-min-microvolt = <200000>;
|
regulator-max-microvolt = <300000>;
|
};
|
};
|
};
|
