Binding for NVIDIA Tegra20 CPUFreq
|
==================================
|
|
Required properties:
|
- clocks: Must contain an entry for the CPU clock.
|
See ../clocks/clock-bindings.txt for details.
|
- operating-points-v2: See ../bindings/opp/opp.txt for details.
|
- #cooling-cells: Should be 2. See ../thermal/thermal-cooling-devices.yaml for details.
|
|
For each opp entry in 'operating-points-v2' table:
|
- opp-supported-hw: Two bitfields indicating:
|
On Tegra20:
|
1. CPU process ID mask
|
2. SoC speedo ID mask
|
|
On Tegra30:
|
1. CPU process ID mask
|
2. CPU speedo ID mask
|
|
A bitwise AND is performed against these values and if any bit
|
matches, the OPP gets enabled.
|
|
- opp-microvolt: CPU voltage triplet.
|
|
Optional properties:
|
- cpu-supply: Phandle to the CPU power supply.
|
|
Example:
|
regulators {
|
cpu_reg: regulator0 {
|
regulator-name = "vdd_cpu";
|
};
|
};
|
|
cpu0_opp_table: opp_table0 {
|
compatible = "operating-points-v2";
|
|
opp@456000000 {
|
clock-latency-ns = <125000>;
|
opp-microvolt = <825000 825000 1125000>;
|
opp-supported-hw = <0x03 0x0001>;
|
opp-hz = /bits/ 64 <456000000>;
|
};
|
|
...
|
};
|
|
cpus {
|
cpu@0 {
|
compatible = "arm,cortex-a9";
|
clocks = <&tegra_car TEGRA20_CLK_CCLK>;
|
operating-points-v2 = <&cpu0_opp_table>;
|
cpu-supply = <&cpu_reg>;
|
#cooling-cells = <2>;
|
};
|
};
|
