/*
|
* wanXL serial card driver for Linux
|
* definitions common to host driver and card firmware
|
*
|
* Copyright (C) 2003 Krzysztof Halasa <khc@pm.waw.pl>
|
*
|
* This program is free software; you can redistribute it and/or modify it
|
* under the terms of version 2 of the GNU General Public License
|
* as published by the Free Software Foundation.
|
*/
|
|
#define RESET_WHILE_LOADING 0
|
|
/* you must rebuild the firmware if any of the following is changed */
|
#define DETECT_RAM 0 /* needed for > 4MB RAM, 16 MB maximum */
|
#define QUICC_MEMCPY_USES_PLX 1 /* must be used if the host has > 256 MB RAM */
|
|
|
#define STATUS_CABLE_V35 2
|
#define STATUS_CABLE_X21 3
|
#define STATUS_CABLE_V24 4
|
#define STATUS_CABLE_EIA530 5
|
#define STATUS_CABLE_INVALID 6
|
#define STATUS_CABLE_NONE 7
|
|
#define STATUS_CABLE_DCE 0x8000
|
#define STATUS_CABLE_DSR 0x0010
|
#define STATUS_CABLE_DCD 0x0008
|
#define STATUS_CABLE_PM_SHIFT 5
|
|
#define PDM_OFFSET 0x1000
|
|
#define TX_BUFFERS 10 /* per port */
|
#define RX_BUFFERS 30
|
#define RX_QUEUE_LENGTH 40 /* card->host queue length - per card */
|
|
#define PACKET_EMPTY 0x00
|
#define PACKET_FULL 0x10
|
#define PACKET_SENT 0x20 /* TX only */
|
#define PACKET_UNDERRUN 0x30 /* TX only */
|
#define PACKET_PORT_MASK 0x03 /* RX only */
|
|
/* bit numbers in PLX9060 doorbell registers */
|
#define DOORBELL_FROM_CARD_TX_0 0 /* packet sent by the card */
|
#define DOORBELL_FROM_CARD_TX_1 1
|
#define DOORBELL_FROM_CARD_TX_2 2
|
#define DOORBELL_FROM_CARD_TX_3 3
|
#define DOORBELL_FROM_CARD_RX 4
|
#define DOORBELL_FROM_CARD_CABLE_0 5 /* cable/PM/etc. changed */
|
#define DOORBELL_FROM_CARD_CABLE_1 6
|
#define DOORBELL_FROM_CARD_CABLE_2 7
|
#define DOORBELL_FROM_CARD_CABLE_3 8
|
|
#define DOORBELL_TO_CARD_OPEN_0 0
|
#define DOORBELL_TO_CARD_OPEN_1 1
|
#define DOORBELL_TO_CARD_OPEN_2 2
|
#define DOORBELL_TO_CARD_OPEN_3 3
|
#define DOORBELL_TO_CARD_CLOSE_0 4
|
#define DOORBELL_TO_CARD_CLOSE_1 5
|
#define DOORBELL_TO_CARD_CLOSE_2 6
|
#define DOORBELL_TO_CARD_CLOSE_3 7
|
#define DOORBELL_TO_CARD_TX_0 8 /* outbound packet queued */
|
#define DOORBELL_TO_CARD_TX_1 9
|
#define DOORBELL_TO_CARD_TX_2 10
|
#define DOORBELL_TO_CARD_TX_3 11
|
|
/* firmware-only status bits, starting from last DOORBELL_TO_CARD + 1 */
|
#define TASK_SCC_0 12
|
#define TASK_SCC_1 13
|
#define TASK_SCC_2 14
|
#define TASK_SCC_3 15
|
|
#define ALIGN32(x) (((x) + 3) & 0xFFFFFFFC)
|
#define BUFFER_LENGTH ALIGN32(HDLC_MAX_MRU + 4) /* 4 bytes for 32-bit CRC */
|
|
/* Address of TX and RX buffers in 68360 address space */
|
#define BUFFERS_ADDR 0x4000 /* 16 KB */
|
|
#ifndef __ASSEMBLER__
|
#define PLX_OFFSET 0
|
#else
|
#define PLX_OFFSET PLX + 0x80
|
#endif
|
|
#define PLX_MAILBOX_0 (PLX_OFFSET + 0x40)
|
#define PLX_MAILBOX_1 (PLX_OFFSET + 0x44)
|
#define PLX_MAILBOX_2 (PLX_OFFSET + 0x48)
|
#define PLX_MAILBOX_3 (PLX_OFFSET + 0x4C)
|
#define PLX_MAILBOX_4 (PLX_OFFSET + 0x50)
|
#define PLX_MAILBOX_5 (PLX_OFFSET + 0x54)
|
#define PLX_MAILBOX_6 (PLX_OFFSET + 0x58)
|
#define PLX_MAILBOX_7 (PLX_OFFSET + 0x5C)
|
#define PLX_DOORBELL_TO_CARD (PLX_OFFSET + 0x60)
|
#define PLX_DOORBELL_FROM_CARD (PLX_OFFSET + 0x64)
|
#define PLX_INTERRUPT_CS (PLX_OFFSET + 0x68)
|
#define PLX_CONTROL (PLX_OFFSET + 0x6C)
|
|
#ifdef __ASSEMBLER__
|
#define PLX_DMA_0_MODE (PLX + 0x100)
|
#define PLX_DMA_0_PCI (PLX + 0x104)
|
#define PLX_DMA_0_LOCAL (PLX + 0x108)
|
#define PLX_DMA_0_LENGTH (PLX + 0x10C)
|
#define PLX_DMA_0_DESC (PLX + 0x110)
|
#define PLX_DMA_1_MODE (PLX + 0x114)
|
#define PLX_DMA_1_PCI (PLX + 0x118)
|
#define PLX_DMA_1_LOCAL (PLX + 0x11C)
|
#define PLX_DMA_1_LENGTH (PLX + 0x120)
|
#define PLX_DMA_1_DESC (PLX + 0x124)
|
#define PLX_DMA_CMD_STS (PLX + 0x128)
|
#define PLX_DMA_ARBITR_0 (PLX + 0x12C)
|
#define PLX_DMA_ARBITR_1 (PLX + 0x130)
|
#endif
|
|
#define DESC_LENGTH 12
|
|
/* offsets from start of status_t */
|
/* card to host */
|
#define STATUS_OPEN 0
|
#define STATUS_CABLE (STATUS_OPEN + 4)
|
#define STATUS_RX_OVERRUNS (STATUS_CABLE + 4)
|
#define STATUS_RX_FRAME_ERRORS (STATUS_RX_OVERRUNS + 4)
|
|
/* host to card */
|
#define STATUS_PARITY (STATUS_RX_FRAME_ERRORS + 4)
|
#define STATUS_ENCODING (STATUS_PARITY + 4)
|
#define STATUS_CLOCKING (STATUS_ENCODING + 4)
|
#define STATUS_TX_DESCS (STATUS_CLOCKING + 4)
|
|
#ifndef __ASSEMBLER__
|
|
typedef struct {
|
volatile u32 stat;
|
u32 address; /* PCI address */
|
volatile u32 length;
|
}desc_t;
|
|
|
typedef struct {
|
// Card to host
|
volatile u32 open;
|
volatile u32 cable;
|
volatile u32 rx_overruns;
|
volatile u32 rx_frame_errors;
|
|
// Host to card
|
u32 parity;
|
u32 encoding;
|
u32 clocking;
|
desc_t tx_descs[TX_BUFFERS];
|
}port_status_t;
|
|
#endif /* __ASSEMBLER__ */
|
