menu "Command line interface"
|
|
config CMDLINE
|
bool "Support U-Boot commands"
|
default y
|
help
|
Enable U-Boot's command-line functions. This provides a means
|
to enter commands into U-Boot for a wide variety of purposes. It
|
also allows scripts (containing commands) to be executed.
|
Various commands and command categorys can be indivdually enabled.
|
Depending on the number of commands enabled, this can add
|
substantially to the size of U-Boot.
|
|
config HUSH_PARSER
|
bool "Use hush shell"
|
depends on CMDLINE
|
help
|
This option enables the "hush" shell (from Busybox) as command line
|
interpreter, thus enabling powerful command line syntax like
|
if...then...else...fi conditionals or `&&' and '||'
|
constructs ("shell scripts").
|
|
If disabled, you get the old, much simpler behaviour with a somewhat
|
smaller memory footprint.
|
|
config SYS_PROMPT
|
string "Shell prompt"
|
default "=> "
|
help
|
This string is displayed in the command line to the left of the
|
cursor.
|
|
config U_BOOT_CMD_ALWAYS
|
bool "Enable cmd with U_BOOT_CMD_ALWAYS() declared"
|
depends on !CMDLINE
|
help
|
This function is used to support some special U-Boot commands with
|
U_BOOT_CMD_ALWAYS() declared even when CONFIG_CMDLINE is disabled.
|
It reduces the image size and works with simple CLI.
|
|
menu "Autoboot options"
|
|
config AUTOBOOT
|
bool "Autoboot"
|
default y
|
help
|
This enables the autoboot. See doc/README.autoboot for detail.
|
|
config AUTOBOOT_KEYED
|
bool "Stop autobooting via specific input key / string"
|
default n
|
help
|
This option enables stopping (aborting) of the automatic
|
boot feature only by issuing a specific input key or
|
string. If not enabled, any input key will abort the
|
U-Boot automatic booting process and bring the device
|
to the U-Boot prompt for user input.
|
|
config AUTOBOOT_PROMPT
|
string "Autoboot stop prompt"
|
depends on AUTOBOOT_KEYED
|
default "Autoboot in %d seconds\\n"
|
help
|
This string is displayed before the boot delay selected by
|
CONFIG_BOOTDELAY starts. If it is not defined there is no
|
output indicating that autoboot is in progress.
|
|
Note that this define is used as the (only) argument to a
|
printf() call, so it may contain '%' format specifications,
|
provided that it also includes, sepearated by commas exactly
|
like in a printf statement, the required arguments. It is
|
the responsibility of the user to select only such arguments
|
that are valid in the given context.
|
|
config AUTOBOOT_ENCRYPTION
|
bool "Enable encryption in autoboot stopping"
|
depends on AUTOBOOT_KEYED
|
default n
|
|
config AUTOBOOT_DELAY_STR
|
string "Delay autobooting via specific input key / string"
|
depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
|
help
|
This option delays the automatic boot feature by issuing
|
a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR
|
or the environment variable "bootdelaykey" is specified
|
and this string is received from console input before
|
autoboot starts booting, U-Boot gives a command prompt. The
|
U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is
|
used, otherwise it never times out.
|
|
config AUTOBOOT_STOP_STR
|
string "Stop autobooting via specific input key / string"
|
depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
|
help
|
This option enables stopping (aborting) of the automatic
|
boot feature only by issuing a specific input key or
|
string. If CONFIG_AUTOBOOT_STOP_STR or the environment
|
variable "bootstopkey" is specified and this string is
|
received from console input before autoboot starts booting,
|
U-Boot gives a command prompt. The U-Boot prompt never
|
times out, even if CONFIG_BOOT_RETRY_TIME is used.
|
|
config AUTOBOOT_KEYED_CTRLC
|
bool "Enable Ctrl-C autoboot interruption"
|
depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION
|
default n
|
help
|
This option allows for the boot sequence to be interrupted
|
by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey".
|
Setting this variable provides an escape sequence from the
|
limited "password" strings.
|
|
config AUTOBOOT_STOP_STR_SHA256
|
string "Stop autobooting via SHA256 encrypted password"
|
depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION
|
help
|
This option adds the feature to only stop the autobooting,
|
and therefore boot into the U-Boot prompt, when the input
|
string / password matches a values that is encypted via
|
a SHA256 hash and saved in the environment.
|
|
endmenu
|
|
source "cmd/fastboot/Kconfig"
|
|
config BUILD_BIN2C
|
bool
|
|
comment "Commands"
|
|
menu "Info commands"
|
|
config CMD_BDI
|
bool "bdinfo"
|
default y
|
help
|
Print board info
|
|
config CMD_CONFIG
|
bool "config"
|
select BUILD_BIN2C
|
default SANDBOX
|
help
|
Print ".config" contents.
|
|
If this option is enabled, the ".config" file contents are embedded
|
in the U-Boot image and can be printed on the console by the "config"
|
command. This provides information of which options are enabled on
|
the running U-Boot.
|
|
config CMD_CONSOLE
|
bool "coninfo"
|
default y
|
help
|
Print console devices and information.
|
|
config CMD_CPU
|
bool "cpu"
|
help
|
Print information about available CPUs. This normally shows the
|
number of CPUs, type (e.g. manufacturer, architecture, product or
|
internal name) and clock frequency. Other information may be
|
available depending on the CPU driver.
|
|
config CMD_LICENSE
|
bool "license"
|
select BUILD_BIN2C
|
help
|
Print GPL license text
|
|
config CMD_REGINFO
|
bool "reginfo"
|
depends on PPC
|
help
|
Register dump
|
|
endmenu
|
|
menu "Boot commands"
|
|
config CMD_BOOTD
|
bool "bootd"
|
default y
|
help
|
Run the command stored in the environment "bootcmd", i.e.
|
"bootd" does the same thing as "run bootcmd".
|
|
config CMD_BOOTM
|
bool "bootm"
|
default y
|
help
|
Boot an application image from the memory.
|
|
config CMD_BOOTZ
|
bool "bootz"
|
help
|
Boot the Linux zImage
|
|
config CMD_BOOTI
|
bool "booti"
|
depends on ARM64
|
default y
|
help
|
Boot an AArch64 Linux Kernel image from memory.
|
|
config CMD_BOOTEFI
|
bool "bootefi"
|
depends on EFI_LOADER
|
default y
|
help
|
Boot an EFI image from memory.
|
|
config CMD_BOOTEFI_HELLO_COMPILE
|
bool "Compile a standard EFI hello world binary for testing"
|
depends on CMD_BOOTEFI && (ARM || X86)
|
default y
|
help
|
This compiles a standard EFI hello world application with U-Boot so
|
that it can be used with the test/py testing framework. This is useful
|
for testing that EFI is working at a basic level, and for bringing
|
up EFI support on a new architecture.
|
|
No additional space will be required in the resulting U-Boot binary
|
when this option is enabled.
|
|
config CMD_BOOTEFI_HELLO
|
bool "Allow booting a standard EFI hello world for testing"
|
depends on CMD_BOOTEFI_HELLO_COMPILE
|
help
|
This adds a standard EFI hello world application to U-Boot so that
|
it can be used with the 'bootefi hello' command. This is useful
|
for testing that EFI is working at a basic level, and for bringing
|
up EFI support on a new architecture.
|
|
config CMD_BOOTMENU
|
bool "bootmenu"
|
select MENU
|
help
|
Add an ANSI terminal boot menu command.
|
|
config CMD_DTIMG
|
bool "dtimg"
|
select OF_LIBFDT_OVERLAY
|
help
|
Android DTB/DTBO image manipulation commands. Read dtb/dtbo files from
|
image into RAM, dump image structure information, etc. Those dtb/dtbo
|
files should be merged in one dtb further, which needs to be passed to
|
the kernel, as part of a boot process.
|
|
config CMD_ELF
|
bool "bootelf, bootvx"
|
default y
|
help
|
Boot an ELF/vxWorks image from the memory.
|
|
config CMD_FDT
|
bool "Flattened Device Tree utility commands"
|
default y
|
depends on OF_LIBFDT
|
help
|
Do FDT related setup before booting into the Operating System.
|
|
config CMD_GO
|
bool "go"
|
default y
|
help
|
Start an application at a given address.
|
|
config CMD_RUN
|
bool "run"
|
default y
|
help
|
Run the command in the given environment variable.
|
|
config CMD_IMI
|
bool "iminfo"
|
default y
|
help
|
Print header information for application image.
|
|
config CMD_IMLS
|
bool "imls"
|
default y
|
help
|
List all images found in flash
|
|
config CMD_XIMG
|
bool "imxtract"
|
default y
|
help
|
Extract a part of a multi-image.
|
|
config CMD_POWEROFF
|
bool "poweroff"
|
help
|
Poweroff/Shutdown the system
|
|
config CMD_SPL
|
bool "spl export - Export boot information for Falcon boot"
|
depends on SPL
|
help
|
Falcon mode allows booting directly from SPL into an Operating
|
System such as Linux, thus skipping U-Boot proper. See
|
doc/README.falcon for full information about how to use this
|
command.
|
|
config CMD_SPL_NAND_OFS
|
hex "Offset of OS command line args for Falcon-mode NAND boot"
|
depends on CMD_SPL
|
default 0
|
help
|
This provides the offset of the command line arguments for Linux
|
when booting from NAND in Falcon mode. See doc/README.falcon
|
for full information about how to use this option (and also see
|
board/gateworks/gw_ventana/README for an example).
|
|
config CMD_SPL_WRITE_SIZE
|
hex "Size of argument area"
|
depends on CMD_SPL
|
default 0x2000
|
help
|
This provides the size of the command-line argument area in NAND
|
flash used by Falcon-mode boot. See the documentation until CMD_SPL
|
for detail.
|
|
config CMD_THOR_DOWNLOAD
|
bool "thor - TIZEN 'thor' download"
|
help
|
Implements the 'thor' download protocol. This is a way of
|
downloading a software update over USB from an attached host.
|
There is no documentation about this within the U-Boot source code
|
but you should be able to find something on the interwebs.
|
|
config CMD_ZBOOT
|
bool "zboot - x86 boot command"
|
help
|
With x86 machines it is common to boot a bzImage file which
|
contains both a kernel and a setup.bin file. The latter includes
|
configuration information from the dark ages which x86 boards still
|
need to pick things out of.
|
|
Consider using FIT in preference to this since it supports directly
|
booting both 32- and 64-bit kernels, as well as secure boot.
|
Documentation is available in doc/uImage.FIT/x86-fit-boot.txt
|
|
endmenu
|
|
menu "Environment commands"
|
|
config CMD_ASKENV
|
bool "ask for env variable"
|
help
|
Ask for environment variable
|
|
config CMD_EXPORTENV
|
bool "env export"
|
default y
|
help
|
Export environments.
|
|
config CMD_IMPORTENV
|
bool "env import"
|
default y
|
help
|
Import environments.
|
|
config CMD_EDITENV
|
bool "editenv"
|
default y
|
help
|
Edit environment variable.
|
|
config CMD_GREPENV
|
bool "search env"
|
help
|
Allow for searching environment variables
|
|
config CMD_SAVEENV
|
bool "saveenv"
|
default y
|
help
|
Save all environment variables into the compiled-in persistent
|
storage.
|
|
config CMD_ENV_EXISTS
|
bool "env exists"
|
default y
|
help
|
Check if a variable is defined in the environment for use in
|
shell scripting.
|
|
config CMD_ENV_CALLBACK
|
bool "env callbacks - print callbacks and their associated variables"
|
help
|
Some environment variable have callbacks defined by
|
U_BOOT_ENV_CALLBACK. These are called when the variable changes.
|
For example changing "baudrate" adjust the serial baud rate. This
|
command lists the currently defined callbacks.
|
|
config CMD_ENV_FLAGS
|
bool "env flags -print variables that have non-default flags"
|
help
|
Some environment variables have special flags that control their
|
behaviour. For example, serial# can only be written once and cannot
|
be deleted. This command shows the variables that have special
|
flags.
|
|
endmenu
|
|
menu "Memory commands"
|
|
config CMD_CRC32
|
bool "crc32"
|
select HASH
|
default y
|
help
|
Compute CRC32.
|
|
config CRC32_VERIFY
|
bool "crc32 -v"
|
depends on CMD_CRC32
|
help
|
Add -v option to verify data against a crc32 checksum.
|
|
config CMD_EEPROM
|
bool "eeprom - EEPROM subsystem"
|
help
|
(deprecated, needs conversion to driver model)
|
Provides commands to read and write EEPROM (Electrically Erasable
|
Programmable Read Only Memory) chips that are connected over an
|
I2C bus.
|
|
config CMD_EEPROM_LAYOUT
|
bool "Enable layout-aware eeprom commands"
|
depends on CMD_EEPROM
|
help
|
(deprecated, needs conversion to driver model)
|
When enabled, additional eeprom sub-commands become available.
|
|
eeprom print - prints the contents of the eeprom in a human-readable
|
way (eeprom layout fields, and data formatted to be fit for human
|
consumption).
|
|
eeprom update - allows user to update eeprom fields by specifying
|
the field name, and providing the new data in a human readable format
|
(same format as displayed by the eeprom print command).
|
|
Both commands can either auto detect the layout, or be told which
|
layout to use.
|
|
Feature API:
|
__weak int parse_layout_version(char *str)
|
- override to provide your own layout name parsing
|
__weak void __eeprom_layout_assign(struct eeprom_layout *layout,
|
int layout_version);
|
- override to setup the layout metadata based on the version
|
__weak int eeprom_layout_detect(unsigned char *data)
|
- override to provide your own algorithm for detecting layout
|
version
|
eeprom_field.c
|
- contains various printing and updating functions for common
|
types of eeprom fields. Can be used for defining
|
custom layouts.
|
|
config EEPROM_LAYOUT_HELP_STRING
|
string "Tells user what layout names are supported"
|
depends on CMD_EEPROM_LAYOUT
|
default "<not defined>"
|
help
|
Help printed with the LAYOUT VERSIONS part of the 'eeprom'
|
command's help.
|
|
config LOOPW
|
bool "loopw"
|
help
|
Infinite write loop on address range
|
|
config CMD_MD5SUM
|
bool "md5sum"
|
default n
|
select MD5
|
help
|
Compute MD5 checksum.
|
|
config MD5SUM_VERIFY
|
bool "md5sum -v"
|
default n
|
depends on CMD_MD5SUM
|
help
|
Add -v option to verify data against an MD5 checksum.
|
|
config CMD_MEMINFO
|
bool "meminfo"
|
help
|
Display memory information.
|
|
config CMD_MEMORY
|
bool "md, mm, nm, mw, cp, cmp, base, loop"
|
default y
|
help
|
Memory commands.
|
md - memory display
|
mm - memory modify (auto-incrementing address)
|
nm - memory modify (constant address)
|
mw - memory write (fill)
|
cp - memory copy
|
cmp - memory compare
|
base - print or set address offset
|
loop - initialize loop on address range
|
|
config CMD_MEMTEST
|
bool "memtest"
|
help
|
Simple RAM read/write test.
|
|
config CMD_MX_CYCLIC
|
bool "mdc, mwc"
|
help
|
mdc - memory display cyclic
|
mwc - memory write cyclic
|
|
config CMD_SHA1SUM
|
bool "sha1sum"
|
select SHA1
|
help
|
Compute SHA1 checksum.
|
|
config SHA1SUM_VERIFY
|
bool "sha1sum -v"
|
depends on CMD_SHA1SUM
|
help
|
Add -v option to verify data against a SHA1 checksum.
|
|
config CMD_STRINGS
|
bool "strings - display strings in memory"
|
help
|
This works similarly to the Unix 'strings' command except that it
|
works with a memory range. String of printable characters found
|
within the range are displayed. The minimum number of characters
|
for a sequence to be considered a string can be provided.
|
|
config CMD_CRYPTO
|
bool "crypto test"
|
depends on DM_CRYPTO
|
select SHA1
|
select SHA256
|
select SHA512
|
select MD5
|
help
|
Crypto test.
|
|
config CMD_CRYPTO_SUM
|
bool "crypto checksum engine"
|
depends on DM_CRYPTO
|
default y
|
help
|
Crypto checksum engine for sha1/sha256/sha512/md5.
|
endmenu
|
|
menu "Compression commands"
|
|
config CMD_LZMADEC
|
bool "lzmadec"
|
default y if CMD_BOOTI
|
select LZMA
|
help
|
Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm)
|
image from memory.
|
|
config CMD_UNZIP
|
bool "unzip"
|
default y if CMD_BOOTI
|
help
|
Uncompress a zip-compressed memory region.
|
|
config CMD_ZIP
|
bool "zip"
|
help
|
Compress a memory region with zlib deflate method.
|
|
endmenu
|
|
menu "Device access commands"
|
|
config CMD_ARMFLASH
|
#depends on FLASH_CFI_DRIVER
|
bool "armflash"
|
help
|
ARM Ltd reference designs flash partition access
|
|
config CMD_CLK
|
bool "clk - Show clock frequencies"
|
help
|
(deprecated)
|
Shows clock frequences by calling a sock_clk_dump() hook function.
|
This is depreated in favour of using the CLK uclass and accessing
|
clock values from associated drivers. However currently no command
|
exists for this.
|
|
config CMD_DEMO
|
bool "demo - Demonstration commands for driver model"
|
depends on DM
|
help
|
Provides a 'demo' command which can be used to play around with
|
driver model. To use this properly you will need to enable one or
|
both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
|
Otherwise you will always get an empty list of devices. The demo
|
devices are defined in the sandbox device tree, so the easiest
|
option is to use sandbox and pass the -d point to sandbox's
|
u-boot.dtb file.
|
|
config CMD_DFU
|
bool "dfu"
|
select USB_FUNCTION_DFU
|
help
|
Enables the command "dfu" which is used to have U-Boot create a DFU
|
class device via USB. This command requires that the "dfu_alt_info"
|
environment variable be set and define the alt settings to expose to
|
the host.
|
|
config CMD_DM
|
bool "dm - Access to driver model information"
|
depends on DM
|
default y
|
help
|
Provides access to driver model data structures and information,
|
such as a list of devices, list of uclasses and the state of each
|
device (e.g. activated). This is not required for operation, but
|
can be useful to see the state of driver model for debugging or
|
interest.
|
|
config CMD_FDC
|
bool "fdcboot - Boot from floppy device"
|
help
|
The 'fdtboot' command allows booting an image from a floppy disk.
|
|
config CMD_FLASH
|
bool "flinfo, erase, protect"
|
default y
|
help
|
NOR flash support.
|
flinfo - print FLASH memory information
|
erase - FLASH memory
|
protect - enable or disable FLASH write protection
|
|
config CMD_FPGA
|
bool "fpga"
|
default y
|
help
|
FPGA support.
|
|
config CMD_FPGA_LOADBP
|
bool "fpga loadbp - load partial bitstream (Xilinx only)"
|
depends on CMD_FPGA
|
help
|
Supports loading an FPGA device from a bitstream buffer containing
|
a partial bitstream.
|
|
config CMD_FPGA_LOADFS
|
bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)"
|
depends on CMD_FPGA
|
help
|
Supports loading an FPGA device from a FAT filesystem.
|
|
config CMD_FPGA_LOADMK
|
bool "fpga loadmk - load bitstream from image"
|
depends on CMD_FPGA
|
help
|
Supports loading an FPGA device from a image generated by mkimage.
|
|
config CMD_FPGA_LOADP
|
bool "fpga loadp - load partial bitstream"
|
depends on CMD_FPGA
|
help
|
Supports loading an FPGA device from a bitstream buffer containing
|
a partial bitstream.
|
|
config CMD_FPGAD
|
bool "fpgad - dump FPGA registers"
|
help
|
(legacy, needs conversion to driver model)
|
Provides a way to dump FPGA registers by calling the board-specific
|
fpga_get_reg() function. This functions similarly to the 'md'
|
command.
|
|
config CMD_FUSE
|
bool "fuse - support for the fuse subssystem"
|
help
|
(deprecated - needs conversion to driver model)
|
This allows reading, sensing, programming or overriding fuses
|
which control the behaviour of the device. The command uses the
|
fuse_...() API.
|
|
config CMD_GPIO
|
bool "gpio"
|
help
|
GPIO support.
|
|
config CMD_GPT
|
bool "GPT (GUID Partition Table) command"
|
select PARTITION_UUIDS
|
select EFI_PARTITION
|
imply RANDOM_UUID
|
help
|
Enable the 'gpt' command to ready and write GPT style partition
|
tables.
|
|
config RANDOM_UUID
|
bool "GPT Random UUID generation"
|
help
|
Enable the generation of partitions with random UUIDs if none
|
are provided.
|
|
config CMD_GPT_RENAME
|
bool "GPT partition renaming commands"
|
depends on CMD_GPT
|
help
|
Enables the 'gpt' command to interchange names on two GPT
|
partitions via the 'gpt swap' command or to rename single
|
partitions via the 'rename' command.
|
|
config CMD_IDE
|
bool "ide - Support for IDE drivers"
|
select IDE
|
help
|
Provides an 'ide' command which allows accessing the IDE drive,
|
reseting the IDE interface, printing the partition table and
|
geting device info. It also enables the 'diskboot' command which
|
permits booting from an IDE drive.
|
|
config CMD_IO
|
bool "io - Support for performing I/O accesses"
|
help
|
Provides an 'iod' command to display I/O space and an 'iow' command
|
to write values to the I/O space. This can be useful for manually
|
checking the state of devices during boot when debugging device
|
drivers, etc.
|
|
config CMD_IOTRACE
|
bool "iotrace - Support for tracing I/O activity"
|
help
|
Provides an 'iotrace' command which supports recording I/O reads and
|
writes in a trace buffer in memory . It also maintains a checksum
|
of the trace records (even if space is exhausted) so that the
|
sequence of I/O accesses can be verified.
|
|
When debugging drivers it is useful to see what I/O accesses were
|
done and in what order.
|
|
Even if the individual accesses are of little interest it can be
|
useful to verify that the access pattern is consistent each time
|
an operation is performed. In this case a checksum can be used to
|
characterise the operation of a driver. The checksum can be compared
|
across different runs of the operation to verify that the driver is
|
working properly.
|
|
In particular, when performing major refactoring of the driver, where
|
the access pattern should not change, the checksum provides assurance
|
that the refactoring work has not broken the driver.
|
|
This works by sneaking into the io.h heder for an architecture and
|
redirecting I/O accesses through iotrace's tracing mechanism.
|
|
For now no commands are provided to examine the trace buffer. The
|
format is fairly simple, so 'md' is a reasonable substitute.
|
|
Note: The checksum feature is only useful for I/O regions where the
|
contents do not change outside of software control. Where this is not
|
suitable you can fall back to manually comparing the addresses. It
|
might be useful to enhance tracing to only checksum the accesses and
|
not the data read/written.
|
|
config CMD_I2C
|
bool "i2c"
|
help
|
I2C support.
|
|
config CMD_LOADB
|
bool "loadb"
|
default y
|
help
|
Load a binary file over serial line.
|
|
config CMD_LOADS
|
bool "loads"
|
default y
|
help
|
Load an S-Record file over serial line
|
|
config CMD_LOAD_ANDROID
|
bool "load_android"
|
default n
|
depends on ANDROID_BOOT_IMAGE
|
help
|
Load an Android Boot image from storage. The Android Boot images
|
define the size and kernel address on the header, which are used by
|
this command.
|
|
config CMD_BOOT_ANDROID
|
bool "boot_android"
|
default n
|
depends on ANDROID_BOOTLOADER
|
help
|
Performs the Android Bootloader boot flow, loading the appropriate
|
Android image (normal kernel, recovery kernel or "bootloader" mode)
|
and booting it. The boot mode is determined by the contents of the
|
Android Bootloader Message.
|
|
config CMD_ANDROID_AB_SELECT
|
bool "android_ab_select"
|
default n
|
depends on ANDROID_AB
|
help
|
On Android devices with more than one boot slot (multiple copies of
|
the kernel and system images) this provides a command to select which
|
slot should be used to boot from and register the boot attempt. This
|
is used by the new A/B update model where one slot is updated in the
|
background while running from the other slot.
|
|
config CMD_BOOT_FIT
|
bool "boot_fit"
|
default n
|
depends on ROCKCHIP_FIT_IMAGE
|
help
|
Performs the FIT boot flow, loading the appropriate FIT image from
|
boot/recovery partition containing kernel/fdt/ramdisk images.
|
Additional that, the IH_TYPE_MULTI can be used for resource file.
|
|
config CMD_BOOT_UIMAGE
|
bool "boot_uimage"
|
default n
|
depends on ROCKCHIP_UIMAGE
|
help
|
Performs the Legacy uImage boot flow, loading the appropriate uImage
|
file from resource/kernel/boot(recovery) partitions. Additional that,
|
the resource partition can be fdt or resource(recommand) uImage file.
|
|
config CMD_BOOT_ROCKCHIP
|
bool "boot_rockchip"
|
default n
|
depends on RKIMG_BOOTLOADER
|
help
|
Performs the Rockchip Bootloader boot flow, loading the appropriate
|
Rockchip image (normal kernel, boot, resource and revocery)
|
and booting it. The boot mode is determined by the contents of the
|
Rockchip bootloader helper.
|
|
config CMD_MMC
|
bool "mmc"
|
help
|
MMC memory mapped support.
|
|
config CMD_MTD
|
bool "mtd"
|
select MTD_PARTITIONS
|
help
|
MTD commands support.
|
|
config CMD_NAND
|
bool "nand"
|
default y if NAND_SUNXI
|
help
|
NAND support.
|
|
if CMD_NAND
|
config CMD_NAND_TRIMFFS
|
bool "nand write.trimffs"
|
default y if ARCH_SUNXI
|
help
|
Allows one to skip empty pages when flashing something on a NAND.
|
|
config CMD_NAND_LOCK_UNLOCK
|
bool "nand lock/unlock"
|
help
|
NAND locking support.
|
|
config CMD_NAND_TORTURE
|
bool "nand torture"
|
help
|
NAND torture support.
|
|
endif # CMD_NAND
|
|
config CMD_NVME
|
bool "nvme"
|
depends on NVME
|
default y if NVME
|
help
|
NVM Express device support
|
|
config CMD_MMC_SPI
|
bool "mmc_spi - Set up MMC SPI device"
|
help
|
Provides a way to set up an MMC (Multimedia Card) SPI (Serial
|
Peripheral Interface) device. The device provides a means of
|
accessing an MMC device via SPI using a single data line, limited
|
to 20MHz. It is useful since it reduces the amount of protocol code
|
required.
|
|
config CMD_ONENAND
|
bool "onenand - access to onenand device"
|
help
|
OneNAND is a brand of NAND ('Not AND' gate) flash which provides
|
various useful features. This command allows reading, writing,
|
and erasing blocks. It allso provides a way to show and change
|
bad blocks, and test the device.
|
|
config CMD_PART
|
bool "part"
|
select PARTITION_UUIDS
|
help
|
Read and display information about the partition table on
|
various media.
|
|
config CMD_PCI
|
bool "pci - Access PCI devices"
|
help
|
Provide access to PCI (Peripheral Interconnect Bus), a type of bus
|
used on some devices to allow the CPU to communicate with its
|
peripherals. Sub-commands allow bus enumeration, displaying and
|
changing configuration space and a few other features.
|
|
config CMD_PCMCIA
|
bool "pinit - Set up PCMCIA device"
|
help
|
Provides a means to initialise a PCMCIA (Personal Computer Memory
|
Card International Association) device. This is an old standard from
|
about 1990. These devices are typically removable memory or network
|
cards using a standard 68-pin connector.
|
|
config CMD_READ
|
bool "read - Read binary data from a partition"
|
help
|
Provides low-level access to the data in a partition.
|
|
config CMD_REMOTEPROC
|
bool "remoteproc"
|
depends on REMOTEPROC
|
help
|
Support for Remote Processor control
|
|
config CMD_ROCKUSB
|
bool "rockusb - Command to upgrade Rockchip device"
|
depends on USB_GADGET
|
help
|
Rockusb command provides a way to upgrade firmware for
|
Rockchip SoC based devices, its design make use of USB
|
Bulk-Only Transport based on UMS framework.
|
|
config CMD_RKNAND
|
bool "rknand"
|
depends on (RKNAND || RKNANDC_NAND)
|
default y if (RKNAND || RKNANDC_NAND)
|
help
|
Rockchip NAND FLASH device support
|
|
config CMD_RKSFC
|
bool "rksfc"
|
depends on (RKSFC_NOR || RKSFC_NAND)
|
default y if (RKSFC_NOR || RKSFC_NAND)
|
help
|
Rockchip SFC device support
|
|
config CMD_RK_SECURE_STORAGE
|
bool "dump rockchip efuse/otp content"
|
help
|
Dump the data which is written in OTP or efuse.
|
|
config CMD_SATA
|
bool "sata - Access SATA subsystem"
|
select SATA
|
help
|
SATA (Serial Advanced Technology Attachment) is a serial bus
|
standard for connecting to hard drives and other storage devices.
|
This command provides information about attached devices and allows
|
reading, writing and other operations.
|
|
SATA replaces PATA (originally just ATA), which stands for Parallel AT
|
Attachment, where AT refers to an IBM AT (Advanced Technology)
|
computer released in 1984.
|
|
config CMD_SAVES
|
bool "saves - Save a file over serial in S-Record format"
|
help
|
Provides a way to save a binary file using the Motorola S-Record
|
format over the serial line.
|
|
config CMD_SDRAM
|
bool "sdram - Print SDRAM configuration information"
|
help
|
Provides information about attached SDRAM. This assumed that the
|
SDRAM has an EEPROM with information that can be read using the
|
I2C bus. This is only available on some boards.
|
|
config CMD_SF
|
bool "sf"
|
help
|
SPI Flash support
|
|
config CMD_SF_TEST
|
bool "sf test - Allow testing of SPI flash"
|
help
|
Provides a way to test that SPI flash is working correctly. The
|
test is destructive, in that an area of SPI flash must be provided
|
for the test to use. Performance information is also provided,
|
measuring the performance of reading, writing and erasing in
|
Mbps (Million Bits Per Second). This value should approximately
|
equal the SPI bus speed for a single-bit-wide SPI bus, assuming
|
everything is working properly.
|
|
config CMD_SPI
|
bool "sspi"
|
help
|
SPI utility command.
|
|
config CMD_TSI148
|
bool "tsi148 - Command to access tsi148 device"
|
help
|
This provides various sub-commands to initialise and configure the
|
Turndra tsi148 device. See the command help for full details.
|
|
config CMD_UFS
|
bool "Enable UFS - Universal Flash Subsystem commands"
|
depends on UFS
|
help
|
"This provides commands to initialise and configure universal flash
|
subsystem devices"
|
|
config CMD_UNIVERSE
|
bool "universe - Command to set up the Turndra Universe controller"
|
help
|
This allows setting up the VMEbus provided by this controller.
|
See the command help for full details.
|
|
config CMD_USB
|
bool "usb"
|
help
|
USB support.
|
|
config CMD_USB_SDP
|
bool "sdp"
|
select USB_FUNCTION_SDP
|
help
|
Enables the command "sdp" which is used to have U-Boot emulating the
|
Serial Download Protocol (SDP) via USB.
|
|
config CMD_USB_MASS_STORAGE
|
bool "UMS usb mass storage"
|
help
|
USB mass storage support
|
|
endmenu
|
|
|
menu "Shell scripting commands"
|
|
config CMD_ECHO
|
bool "echo"
|
default y
|
help
|
Echo args to console
|
|
config CMD_ITEST
|
bool "itest"
|
default y
|
help
|
Return true/false on integer compare.
|
|
config CMD_SCRIPT_UPDATE
|
bool "sd_update/usb_update/tftp_update"
|
help
|
Auto run sd_update/usb_update/tftp_update.txt from sd/udisk/tftp.
|
|
config CMD_SOURCE
|
bool "source"
|
default y
|
help
|
Run script from memory
|
|
config CMD_SETEXPR
|
bool "setexpr"
|
default y
|
help
|
Evaluate boolean and math expressions and store the result in an env
|
variable.
|
Also supports loading the value at a memory location into a variable.
|
If CONFIG_REGEX is enabled, setexpr also supports a gsub function.
|
|
endmenu
|
|
menu "Network commands"
|
|
config CMD_NET
|
bool "bootp, tftpboot"
|
select NET
|
default y
|
help
|
Network commands.
|
bootp - boot image via network using BOOTP/TFTP protocol
|
tftpboot - boot image via network using TFTP protocol
|
|
config CMD_TFTPPUT
|
bool "tftp put"
|
help
|
TFTP put command, for uploading files to a server
|
|
config CMD_TFTP_BOOTM
|
bool "tftp download and bootm"
|
help
|
TFTP bootm command, download and bootm the aosp/uImage/FIT Image.
|
|
config CMD_TFTP_FLASH
|
bool "tftp download and flash"
|
help
|
TFTP flash command, download and flash the Image to partition.
|
|
config CMD_TFTP_UPDATE
|
bool "tftp update"
|
help
|
Update a set of images organized with FIT via network using TFTP protocol
|
|
|
config CMD_TFTPSRV
|
bool "tftpsrv"
|
help
|
Act as a TFTP server and boot the first received file
|
|
config CMD_RARP
|
bool "rarpboot"
|
help
|
Boot image via network using RARP/TFTP protocol
|
|
config CMD_DHCP
|
bool "dhcp"
|
help
|
Boot image via network using DHCP/TFTP protocol
|
|
config CMD_PXE
|
bool "pxe"
|
select MENU
|
help
|
Boot image via network using PXE protocol
|
|
config CMD_NFS
|
bool "nfs"
|
default y
|
help
|
Boot image via network using NFS protocol.
|
|
config CMD_MII
|
bool "mii"
|
help
|
Enable MII utility commands.
|
|
config CMD_PING
|
bool "ping"
|
help
|
Send ICMP ECHO_REQUEST to network host
|
|
config CMD_CDP
|
bool "cdp"
|
help
|
Perform CDP network configuration
|
|
config CMD_SNTP
|
bool "sntp"
|
help
|
Synchronize RTC via network
|
|
config CMD_DNS
|
bool "dns"
|
help
|
Lookup the IP of a hostname
|
|
config CMD_LINK_LOCAL
|
bool "linklocal"
|
help
|
Acquire a network IP address using the link-local protocol
|
|
config CMD_ETHSW
|
bool "ethsw"
|
help
|
Allow control of L2 Ethernet switch commands. These are supported
|
by the vsc9953 Ethernet driver at present. Sub-commands allow
|
operations such as enabling / disabling a port and
|
viewing/maintaining the filtering database (FDB)
|
|
endmenu
|
|
source "cmd/ddr_tool/Kconfig"
|
|
menu "Misc commands"
|
|
config CMD_BMP
|
bool "Enable 'bmp' command"
|
depends on LCD || DM_VIDEO || VIDEO
|
help
|
This provides a way to obtain information about a BMP-format iamge
|
and to display it. BMP (which presumably stands for BitMaP) is a
|
file format defined by Microsoft which supports images of various
|
depths, formats and compression methods. Headers on the file
|
determine the formats used. This command can be used by first loading
|
the image into RAM, then using this command to look at it or display
|
it.
|
|
config CMD_BSP
|
bool "Enable board-specific commands"
|
help
|
(deprecated: instead, please define a Kconfig option for each command)
|
|
Some boards have board-specific commands which are only enabled
|
during developemnt and need to be turned off for production. This
|
option provides a way to control this. The commands that are enabled
|
vary depending on the board.
|
|
config CMD_BKOPS_ENABLE
|
bool "mmc bkops enable"
|
depends on CMD_MMC
|
default n
|
help
|
Enable command for setting manual background operations handshake
|
on a eMMC device. The feature is optionally available on eMMC devices
|
conforming to standard >= 4.41.
|
|
config CMD_BLOCK_CACHE
|
bool "blkcache - control and stats for block cache"
|
depends on BLOCK_CACHE
|
default y if BLOCK_CACHE
|
help
|
Enable the blkcache command, which can be used to control the
|
operation of the cache functions.
|
This is most useful when fine-tuning the operation of the cache
|
during development, but also allows the cache to be disabled when
|
it might hurt performance (e.g. when using the ums command).
|
|
config CMD_CACHE
|
bool "icache or dcache"
|
help
|
Enable the "icache" and "dcache" commands
|
|
config CMD_DISPLAY
|
bool "Enable the 'display' command, for character displays"
|
help
|
(this needs porting to driver model)
|
This enables the 'display' command which allows a string to be
|
displayed on a simple board-specific display. Implement
|
display_putc() to use it.
|
|
config CMD_LED
|
bool "led"
|
default y if LED
|
help
|
Enable the 'led' command which allows for control of LEDs supported
|
by the board. The LEDs can be listed with 'led list' and controlled
|
with led on/off/togle/blink. Any LED drivers can be controlled with
|
this command, e.g. led_gpio.
|
|
config CMD_DATE
|
bool "date"
|
default y if DM_RTC
|
help
|
Enable the 'date' command for getting/setting the time/date in RTC
|
devices.
|
|
config CMD_TIME
|
bool "time"
|
help
|
Run commands and summarize execution time.
|
|
config CMD_GETTIME
|
bool "gettime - read elapsed time"
|
help
|
Enable the 'gettime' command which reads the elapsed time since
|
U-Boot started running. This shows the time in seconds and
|
milliseconds. See also the 'bootstage' command which provides more
|
flexibility for boot timing.
|
|
config CMD_RNG
|
bool "rng command"
|
depends on DM_RNG
|
select HEXDUMP
|
help
|
Print bytes from the hardware random number generator.
|
|
# TODO: rename to CMD_SLEEP
|
config CMD_MISC
|
bool "sleep"
|
default y
|
help
|
Delay execution for some time
|
|
config CMD_TIMER
|
bool "timer"
|
help
|
Access the system timer.
|
|
config CMD_SOUND
|
bool "sound"
|
depends on SOUND
|
help
|
This provides basic access to the U-Boot's sound support. The main
|
feature is to play a beep.
|
|
sound init - set up sound system
|
sound play - play a sound
|
|
config CMD_QFW
|
bool "qfw"
|
select QFW
|
help
|
This provides access to the QEMU firmware interface. The main
|
feature is to allow easy loading of files passed to qemu-system
|
via -kernel / -initrd
|
|
source "cmd/mvebu/Kconfig"
|
|
config CMD_TERMINAL
|
bool "terminal - provides a way to attach a serial terminal"
|
help
|
Provides a 'cu'-like serial terminal command. This can be used to
|
access other serial ports from the system console. The terminal
|
is very simple with no special processing of characters. As with
|
cu, you can press ~. (tilde followed by period) to exit.
|
|
config CMD_UUID
|
bool "uuid, guid - generation of unique IDs"
|
help
|
This enables two commands:
|
|
uuid - generate random Universally Unique Identifier
|
guid - generate Globally Unique Identifier based on random UUID
|
|
The two commands are very similar except for the endianness of the
|
output.
|
|
endmenu
|
|
config CMD_BOOTSTAGE
|
bool "Enable the 'bootstage' command"
|
depends on BOOTSTAGE
|
help
|
Add a 'bootstage' command which supports printing a report
|
and un/stashing of bootstage data.
|
|
menu "Power commands"
|
config CMD_PMIC
|
bool "Enable Driver Model PMIC command"
|
depends on DM_PMIC
|
help
|
This is the pmic command, based on a driver model pmic's API.
|
Command features are unchanged:
|
- list - list pmic devices
|
- pmic dev <id> - show or [set] operating pmic device (NEW)
|
- pmic dump - dump registers
|
- pmic read address - read byte of register at address
|
- pmic write address - write byte to register at address
|
The only one change for this command is 'dev' subcommand.
|
|
config CMD_REGULATOR
|
bool "Enable Driver Model REGULATOR command"
|
depends on DM_REGULATOR
|
help
|
This command is based on driver model regulator's API.
|
User interface features:
|
- list - list regulator devices
|
- regulator dev <id> - show or [set] operating regulator device
|
- regulator info - print constraints info
|
- regulator status - print operating status
|
- regulator value <val] <-f> - print/[set] voltage value [uV]
|
- regulator current <val> - print/[set] current value [uA]
|
- regulator mode <id> - print/[set] operating mode id
|
- regulator enable - enable the regulator output
|
- regulator disable - disable the regulator output
|
|
The '-f' (force) option can be used for set the value which exceeds
|
the limits, which are found in device-tree and are kept in regulator's
|
uclass platdata structure.
|
|
config CMD_CHARGE_DISPLAY
|
bool "Enable Driver Model Charge Display command"
|
depends on DM_CHARGE_DISPLAY
|
default y
|
help
|
Support U-Boot charge display.
|
|
config CMD_DVFS
|
bool "Enable Driver Model DVFS command"
|
depends on DM_DVFS
|
default y
|
help
|
Support dvfs policy apply API
|
User interface features:
|
- dvfs - apply dvfs policy once
|
- dvfs repeat - repeat apply dvfs policy until achieve the target temperature
|
|
endmenu
|
|
menu "Security commands"
|
config CMD_AES
|
bool "Enable the 'aes' command"
|
select AES
|
help
|
This provides a means to encrypt and decrypt data using the AES
|
(Advanced Encryption Standard). This algorithm uses a symetric key
|
and is widely used as a streaming cipher. Different key lengths are
|
supported by the algorithm but this command only supports 128 bits
|
at present.
|
|
config CMD_BLOB
|
bool "Enable the 'blob' command"
|
help
|
This is used with the Freescale secure boot mechanism.
|
|
Freescale's SEC block has built-in Blob Protocol which provides
|
a method for protecting user-defined data across system power
|
cycles. SEC block protects data in a data structure called a Blob,
|
which provides both confidentiality and integrity protection.
|
|
Encapsulating data as a blob
|
Each time that the Blob Protocol is used to protect data, a
|
different randomly generated key is used to encrypt the data.
|
This random key is itself encrypted using a key which is derived
|
from SoC's non-volatile secret key and a 16 bit Key identifier.
|
The resulting encrypted key along with encrypted data is called a
|
blob. The non-volatile secure key is available for use only during
|
secure boot.
|
|
During decapsulation, the reverse process is performed to get back
|
the original data.
|
|
Sub-commands:
|
blob enc - encapsulating data as a cryptgraphic blob
|
blob dec - decapsulating cryptgraphic blob to get the data
|
|
Syntax:
|
|
blob enc src dst len km
|
|
Encapsulate and create blob of data $len bytes long
|
at address $src and store the result at address $dst.
|
$km is the 16 byte key modifier is also required for
|
generation/use as key for cryptographic operation. Key
|
modifier should be 16 byte long.
|
|
blob dec src dst len km
|
|
Decapsulate the blob of data at address $src and
|
store result of $len byte at addr $dst.
|
$km is the 16 byte key modifier is also required for
|
generation/use as key for cryptographic operation. Key
|
modifier should be 16 byte long.
|
|
config CMD_HASH
|
bool "Support 'hash' command"
|
select HASH
|
help
|
This provides a way to hash data in memory using various supported
|
algorithms (such as SHA1, MD5, CRC32). The computed digest can be
|
saved to memory or to an environment variable. It is also possible
|
to verify a hash against data in memory.
|
|
config HASH_VERIFY
|
bool "hash -v"
|
depends on CMD_HASH
|
help
|
Add -v option to verify data against a hash.
|
|
config CMD_TPM
|
bool "Enable the 'tpm' command"
|
depends on TPM
|
help
|
This provides a means to talk to a TPM from the command line. A wide
|
range of commands if provided - see 'tpm help' for details. The
|
command requires a suitable TPM on your board and the correct driver
|
must be enabled.
|
|
config CMD_TPM_TEST
|
bool "Enable the 'tpm test' command"
|
depends on CMD_TPM
|
help
|
This provides a a series of tests to confirm that the TPM is working
|
correctly. The tests cover initialisation, non-volatile RAM, extend,
|
global lock and checking that timing is within expectations. The
|
tests pass correctly on Infineon TPMs but may need to be adjusted
|
for other devices.
|
|
endmenu
|
|
menu "Firmware commands"
|
config CMD_CROS_EC
|
bool "Enable crosec command"
|
depends on CROS_EC
|
default y
|
help
|
Enable command-line access to the Chrome OS EC (Embedded
|
Controller). This provides the 'crosec' command which has
|
a number of sub-commands for performing EC tasks such as
|
updating its flash, accessing a small saved context area
|
and talking to the I2C bus behind the EC (if there is one).
|
endmenu
|
|
menu "Filesystem commands"
|
config CMD_CBFS
|
bool "Enable the 'cbfs' command"
|
depends on FS_CBFS
|
help
|
Define this to enable support for reading from a Coreboot
|
filesystem. This is a ROM-based filesystem used for accessing files
|
on systems that use coreboot as the first boot-loader and then load
|
U-Boot to actually boot the Operating System. Available commands are
|
cbfsinit, cbfsinfo, cbfsls and cbfsload.
|
|
config CMD_CRAMFS
|
bool "Enable the 'cramfs' command"
|
depends on FS_CRAMFS
|
help
|
This provides commands for dealing with CRAMFS (Compressed ROM
|
filesystem). CRAMFS is useful when space is tight since files are
|
compressed. Two commands are provided:
|
|
cramfsls - lists files in a cramfs image
|
cramfsload - loads a file from a cramfs image
|
|
config CMD_EXT2
|
bool "ext2 command support"
|
help
|
Enables EXT2 FS command
|
|
config CMD_EXT4
|
bool "ext4 command support"
|
help
|
Enables EXT4 FS command
|
|
config CMD_EXT4_WRITE
|
depends on CMD_EXT4
|
bool "ext4 write command support"
|
help
|
Enables EXT4 FS write command
|
|
config CMD_EXT4_SPARSE_WRITE
|
depends on CMD_EXT4
|
bool "ext4 sparse write command support"
|
help
|
|
config CMD_FAT
|
bool "FAT command support"
|
select FS_FAT
|
help
|
Support for the FAT fs
|
|
config CMD_FS_GENERIC
|
bool "filesystem commands"
|
help
|
Enables filesystem commands (e.g. load, ls) that work for multiple
|
fs types.
|
|
config CMD_FS_UUID
|
bool "fsuuid command"
|
help
|
Enables fsuuid command for filesystem UUID.
|
|
config CMD_JFFS2
|
bool "jffs2 command"
|
select FS_JFFS2
|
help
|
Enables commands to support the JFFS2 (Journalling Flash File System
|
version 2) filesystem. This enables fsload, ls and fsinfo which
|
provide the ability to load files, list directories and obtain
|
filesystem information.
|
|
config CMD_MTDPARTS
|
bool "MTD partition support"
|
select MTD_DEVICE if (CMD_NAND || NAND)
|
help
|
MTD partition support
|
|
config CMD_MTD
|
bool "MTD support"
|
help
|
MTD support
|
|
config CMD_MTD_BLK
|
bool "MTD block support"
|
help
|
MTD block support
|
|
config MTDIDS_DEFAULT
|
string "Default MTD IDs"
|
depends on CMD_MTD || CMD_MTDPARTS || CMD_NAND || CMD_FLASH
|
help
|
Defines a default MTD ID
|
|
config MTDPARTS_DEFAULT
|
string "Default MTD partition scheme"
|
depends on CMD_MTD || CMD_MTDPARTS || CMD_NAND || CMD_FLASH
|
help
|
Defines a default MTD partitioning scheme in the Linux MTD command
|
line partitions format
|
|
config CMD_MTDPARTS_SPREAD
|
bool "Padd partition size to take account of bad blocks"
|
depends on CMD_MTDPARTS
|
help
|
This enables the 'spread' sub-command of the mtdparts command.
|
This command will modify the existing mtdparts variable by increasing
|
the size of the partitions such that 1) each partition's net size is
|
at least as large as the size specified in the mtdparts variable and
|
2) each partition starts on a good block.
|
|
config CMD_REISER
|
bool "reiser - Access to reiserfs filesystems"
|
help
|
This provides two commands which operate on a resierfs filesystem,
|
commonly used some years ago:
|
|
reiserls - list files
|
reiserload - load a file
|
|
config CMD_SCSI
|
bool "scsi - Access to SCSI devices"
|
default y if SCSI
|
help
|
This provides a 'scsi' command which provides access to SCSI (Small
|
Computer System Interface) devices. The command provides a way to
|
scan the bus, reset the bus, read and write data and get information
|
about devices.
|
|
config CMD_YAFFS2
|
bool "yaffs2 - Access of YAFFS2 filesystem"
|
depends on YAFFS2
|
default y
|
help
|
This provides commands for accessing a YAFFS2 filesystem. Yet
|
Another Flash Filesystem 2 is a filesystem designed specifically
|
for NAND flash. It incorporates bad-block management and ensures
|
that device writes are sequential regardless of filesystem
|
activity.
|
|
config CMD_ZFS
|
bool "zfs - Access of ZFS filesystem"
|
help
|
This provides commands to accessing a ZFS filesystem, commonly used
|
on Solaris systems. Two sub-commands are provided:
|
|
zfsls - list files in a directory
|
zfsload - load a file
|
|
See doc/README.zfs for more details.
|
|
endmenu
|
|
menu "Debug commands"
|
|
config CMD_ATAGS
|
bool "atags - Dump all rockchip atags"
|
default y
|
help
|
This command dump all rockchip atags.
|
|
config CMD_BEDBUG
|
bool "bedbug"
|
help
|
The bedbug (emBEDded deBUGger) command provides debugging features
|
for some PowerPC processors. For details please see the
|
docuemntation in doc/README.beddbug
|
|
config CMD_DIAG
|
bool "diag - Board diagnostics"
|
help
|
This command provides access to board diagnostic tests. These are
|
called Power-on Self Tests (POST). The command allows listing of
|
available tests and running either all the tests, or specific tests
|
identified by name.
|
|
config CMD_IRQ
|
bool "irq - Show information about interrupts"
|
depends on !ARM && !MIPS && !SH
|
help
|
This enables two commands:
|
|
interrupts - enable or disable interrupts
|
irqinfo - print device-specific interrupt information
|
|
config CMD_KGDB
|
bool "kgdb - Allow debugging of U-Boot with gdb"
|
help
|
This enables a 'kgdb' command which allows gdb to connect to U-Boot
|
over a serial link for debugging purposes. This allows
|
single-stepping, inspecting variables, etc. This is supported only
|
on PowerPC at present.
|
|
config CMD_LOG
|
bool "log - Generation, control and access to logging"
|
help
|
This provides access to logging features. It allows the output of
|
log data to be controlled to a limited extent (setting up the default
|
maximum log level for emitting of records). It also provides access
|
to a command used for testing the log system.
|
|
config CMD_TRACE
|
bool "trace - Support tracing of function calls and timing"
|
help
|
Enables a command to control using of function tracing within
|
U-Boot. This allows recording of call traces including timing
|
information. The command can write data to memory for exporting
|
for analsys (e.g. using bootchart). See doc/README.trace for full
|
details.
|
|
endmenu
|
|
config CMD_UBI
|
tristate "Enable UBI - Unsorted block images commands"
|
select CRC32
|
select MTD_UBI
|
select CMD_MTDPARTS
|
default y if NAND_SUNXI
|
help
|
UBI is a software layer above MTD layer which admits use of LVM-like
|
logical volumes on top of MTD devices, hides some complexities of
|
flash chips like wear and bad blocks and provides some other useful
|
capabilities. Please, consult the MTD web site for more details
|
(www.linux-mtd.infradead.org). Activate this option if you want
|
to use U-Boot UBI commands.
|
|
config CMD_UBIFS
|
tristate "Enable UBIFS - Unsorted block images filesystem commands"
|
depends on CMD_UBI
|
select CRC32
|
select LZO
|
default y if CMD_UBI
|
help
|
UBIFS is a file system for flash devices which works on top of UBI.
|
|
endmenu
|
