// SPDX-License-Identifier: GPL-2.0
|
/*
|
* Support for periodic interrupts (100 per second) and for getting
|
* the current time from the RTC on Power Macintoshes.
|
*
|
* We use the decrementer register for our periodic interrupts.
|
*
|
* Paul Mackerras August 1996.
|
* Copyright (C) 1996 Paul Mackerras.
|
* Copyright (C) 2003-2005 Benjamin Herrenschmidt.
|
*
|
*/
|
#include <linux/errno.h>
|
#include <linux/sched.h>
|
#include <linux/kernel.h>
|
#include <linux/param.h>
|
#include <linux/string.h>
|
#include <linux/mm.h>
|
#include <linux/init.h>
|
#include <linux/time.h>
|
#include <linux/adb.h>
|
#include <linux/cuda.h>
|
#include <linux/pmu.h>
|
#include <linux/interrupt.h>
|
#include <linux/hardirq.h>
|
#include <linux/rtc.h>
|
|
#include <asm/sections.h>
|
#include <asm/prom.h>
|
#include <asm/io.h>
|
#include <asm/machdep.h>
|
#include <asm/time.h>
|
#include <asm/nvram.h>
|
#include <asm/smu.h>
|
|
#include "pmac.h"
|
|
#undef DEBUG
|
|
#ifdef DEBUG
|
#define DBG(x...) printk(x)
|
#else
|
#define DBG(x...)
|
#endif
|
|
/*
|
* Calibrate the decrementer frequency with the VIA timer 1.
|
*/
|
#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */
|
|
/* VIA registers */
|
#define RS 0x200 /* skip between registers */
|
#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
|
#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
|
#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
|
#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
|
#define ACR (11*RS) /* Auxiliary control register */
|
#define IFR (13*RS) /* Interrupt flag register */
|
|
/* Bits in ACR */
|
#define T1MODE 0xc0 /* Timer 1 mode */
|
#define T1MODE_CONT 0x40 /* continuous interrupts */
|
|
/* Bits in IFR and IER */
|
#define T1_INT 0x40 /* Timer 1 interrupt */
|
|
long __init pmac_time_init(void)
|
{
|
s32 delta = 0;
|
#if defined(CONFIG_NVRAM) && defined(CONFIG_PPC32)
|
int dst;
|
|
delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;
|
delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8;
|
delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb);
|
if (delta & 0x00800000UL)
|
delta |= 0xFF000000UL;
|
dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
|
printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
|
dst ? "on" : "off");
|
#endif
|
return delta;
|
}
|
|
#ifdef CONFIG_PMAC_SMU
|
static time64_t smu_get_time(void)
|
{
|
struct rtc_time tm;
|
|
if (smu_get_rtc_time(&tm, 1))
|
return 0;
|
return rtc_tm_to_time64(&tm);
|
}
|
#endif
|
|
/* Can't be __init, it's called when suspending and resuming */
|
time64_t pmac_get_boot_time(void)
|
{
|
/* Get the time from the RTC, used only at boot time */
|
switch (sys_ctrler) {
|
#ifdef CONFIG_ADB_CUDA
|
case SYS_CTRLER_CUDA:
|
return cuda_get_time();
|
#endif
|
#ifdef CONFIG_ADB_PMU
|
case SYS_CTRLER_PMU:
|
return pmu_get_time();
|
#endif
|
#ifdef CONFIG_PMAC_SMU
|
case SYS_CTRLER_SMU:
|
return smu_get_time();
|
#endif
|
default:
|
return 0;
|
}
|
}
|
|
void pmac_get_rtc_time(struct rtc_time *tm)
|
{
|
/* Get the time from the RTC, used only at boot time */
|
switch (sys_ctrler) {
|
#ifdef CONFIG_ADB_CUDA
|
case SYS_CTRLER_CUDA:
|
rtc_time64_to_tm(cuda_get_time(), tm);
|
break;
|
#endif
|
#ifdef CONFIG_ADB_PMU
|
case SYS_CTRLER_PMU:
|
rtc_time64_to_tm(pmu_get_time(), tm);
|
break;
|
#endif
|
#ifdef CONFIG_PMAC_SMU
|
case SYS_CTRLER_SMU:
|
smu_get_rtc_time(tm, 1);
|
break;
|
#endif
|
default:
|
;
|
}
|
}
|
|
int pmac_set_rtc_time(struct rtc_time *tm)
|
{
|
switch (sys_ctrler) {
|
#ifdef CONFIG_ADB_CUDA
|
case SYS_CTRLER_CUDA:
|
return cuda_set_rtc_time(tm);
|
#endif
|
#ifdef CONFIG_ADB_PMU
|
case SYS_CTRLER_PMU:
|
return pmu_set_rtc_time(tm);
|
#endif
|
#ifdef CONFIG_PMAC_SMU
|
case SYS_CTRLER_SMU:
|
return smu_set_rtc_time(tm, 1);
|
#endif
|
default:
|
return -ENODEV;
|
}
|
}
|
|
#ifdef CONFIG_PPC32
|
/*
|
* Calibrate the decrementer register using VIA timer 1.
|
* This is used both on powermacs and CHRP machines.
|
*/
|
static int __init via_calibrate_decr(void)
|
{
|
struct device_node *vias;
|
volatile unsigned char __iomem *via;
|
int count = VIA_TIMER_FREQ_6 / 100;
|
unsigned int dstart, dend;
|
struct resource rsrc;
|
|
vias = of_find_node_by_name(NULL, "via-cuda");
|
if (vias == NULL)
|
vias = of_find_node_by_name(NULL, "via-pmu");
|
if (vias == NULL)
|
vias = of_find_node_by_name(NULL, "via");
|
if (vias == NULL || of_address_to_resource(vias, 0, &rsrc)) {
|
of_node_put(vias);
|
return 0;
|
}
|
of_node_put(vias);
|
via = ioremap(rsrc.start, resource_size(&rsrc));
|
if (via == NULL) {
|
printk(KERN_ERR "Failed to map VIA for timer calibration !\n");
|
return 0;
|
}
|
|
/* set timer 1 for continuous interrupts */
|
out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
|
/* set the counter to a small value */
|
out_8(&via[T1CH], 2);
|
/* set the latch to `count' */
|
out_8(&via[T1LL], count);
|
out_8(&via[T1LH], count >> 8);
|
/* wait until it hits 0 */
|
while ((in_8(&via[IFR]) & T1_INT) == 0)
|
;
|
dstart = get_dec();
|
/* clear the interrupt & wait until it hits 0 again */
|
in_8(&via[T1CL]);
|
while ((in_8(&via[IFR]) & T1_INT) == 0)
|
;
|
dend = get_dec();
|
|
ppc_tb_freq = (dstart - dend) * 100 / 6;
|
|
iounmap(via);
|
|
return 1;
|
}
|
#endif
|
|
/*
|
* Query the OF and get the decr frequency.
|
*/
|
void __init pmac_calibrate_decr(void)
|
{
|
generic_calibrate_decr();
|
|
#ifdef CONFIG_PPC32
|
/* We assume MacRISC2 machines have correct device-tree
|
* calibration. That's better since the VIA itself seems
|
* to be slightly off. --BenH
|
*/
|
if (!of_machine_is_compatible("MacRISC2") &&
|
!of_machine_is_compatible("MacRISC3") &&
|
!of_machine_is_compatible("MacRISC4"))
|
if (via_calibrate_decr())
|
return;
|
|
/* Special case: QuickSilver G4s seem to have a badly calibrated
|
* timebase-frequency in OF, VIA is much better on these. We should
|
* probably implement calibration based on the KL timer on these
|
* machines anyway... -BenH
|
*/
|
if (of_machine_is_compatible("PowerMac3,5"))
|
if (via_calibrate_decr())
|
return;
|
#endif
|
}
|
