/*
|
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
|
*
|
* SPDX-License-Identifier: GPL-2.0+ X11
|
*/
|
|
/dts-v1/;
|
|
#include "rk322x.dtsi"
|
#include "rk322x-u-boot.dtsi"
|
#include <dt-bindings/input/input.h>
|
|
/ {
|
model = "RK3229 GVA/Android Things Board V1.0";
|
compatible = "rockchip,rk3229-gva", "rockchip,rk3229";
|
|
chosen {
|
stdout-path = &uart2;
|
};
|
|
memory@60000000 {
|
device_type = "memory";
|
reg = <0x60000000 0x40000000>;
|
};
|
|
sdio_pwrseq: sdio-pwrseq {
|
compatible = "mmc-pwrseq-simple";
|
clocks = <&rk805 1>;
|
clock-names = "ext_clock";
|
pinctrl-names = "default";
|
pinctrl-0 = <&wifi_enable_h>;
|
|
/*
|
* On the module itself this is one of these (depending
|
* on the actual card populated):
|
* - SDIO_RESET_L_WL_REG_ON
|
* - PDN (power down when low)
|
*/
|
reset-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; /* GPIO2_D2 */
|
};
|
|
vcc_host: vcc-host-regulator {
|
compatible = "regulator-fixed";
|
enable-active-high;
|
gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&host_vbus_drv>;
|
regulator-name = "vcc_host";
|
regulator-always-on;
|
regulator-boot-on;
|
};
|
|
wireless-bluetooth {
|
compatible = "bluetooth-platdata";
|
clocks = <&rk805 1>;
|
clock-names = "ext_clock";
|
uart_rts_gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
|
pinctrl-names = "default", "rts_gpio";
|
BT,reset_gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
|
BT,wake_gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
|
BT,wake_host_irq = <&gpio3 26 GPIO_ACTIVE_HIGH>;
|
status = "okay";
|
};
|
|
wireless-wlan {
|
compatible = "wlan-platdata";
|
rockchip,grf = <&grf>;
|
wifi_chip_type = "ap6255";
|
WIFI,host_wake_irq = <&gpio0 28 GPIO_ACTIVE_HIGH>;
|
status = "okay";
|
};
|
|
gpio_keys {
|
compatible = "gpio-keys";
|
#address-cells = <1>;
|
#size-cells = <0>;
|
autorepeat;
|
|
pinctrl-names = "default";
|
pinctrl-0 = <&pwr_key>;
|
|
power_key: power-key {
|
label = "GPIO Key Power";
|
gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
|
linux,code = <116>;
|
debounce-interval = <100>;
|
wakeup-source;
|
};
|
};
|
};
|
|
|
&i2c0 {
|
status = "okay";
|
|
rk805: rk805@18 {
|
compatible = "rockchip,rk805";
|
status = "okay";
|
reg = <0x18>;
|
interrupt-parent = <&gpio1>;
|
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
|
pinctrl-names = "default";
|
pinctrl-0 = <&pmic_int_l>;
|
rockchip,system-power-controller;
|
wakeup-source;
|
gpio-controller;
|
#gpio-cells = <2>;
|
#clock-cells = <1>;
|
clock-output-names = "xin32k", "rk805-clkout2";
|
|
rtc {
|
status = "okay";
|
};
|
|
pwrkey {
|
status = "okay";
|
};
|
|
gpio {
|
status = "okay";
|
};
|
|
regulators {
|
compatible = "rk805-regulator";
|
status = "okay";
|
#address-cells = <1>;
|
#size-cells = <0>;
|
|
vdd_arm: RK805_DCDC1@0 {
|
regulator-compatible = "RK805_DCDC1";
|
regulator-name = "vdd_arm";
|
regulator-min-microvolt = <712500>;
|
regulator-max-microvolt = <1450000>;
|
regulator-initial-mode = <0x1>;
|
regulator-ramp-delay = <12500>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-mode = <0x2>;
|
regulator-on-in-suspend;
|
regulator-suspend-microvolt = <950000>;
|
};
|
};
|
|
vdd_logic: RK805_DCDC2@1 {
|
regulator-compatible = "RK805_DCDC2";
|
regulator-name = "vdd_logic";
|
regulator-min-microvolt = <712500>;
|
regulator-max-microvolt = <1450000>;
|
regulator-initial-mode = <0x1>;
|
regulator-ramp-delay = <12500>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-mode = <0x2>;
|
regulator-on-in-suspend;
|
regulator-suspend-microvolt = <1000000>;
|
};
|
};
|
|
vcc_ddr: RK805_DCDC3@2 {
|
regulator-compatible = "RK805_DCDC3";
|
regulator-name = "vcc_ddr";
|
regulator-initial-mode = <0x1>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-mode = <0x2>;
|
regulator-on-in-suspend;
|
};
|
};
|
|
vcc_io: RK805_DCDC4@3 {
|
regulator-compatible = "RK805_DCDC4";
|
regulator-name = "vcc_io";
|
regulator-min-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
regulator-initial-mode = <0x1>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-mode = <0x2>;
|
regulator-on-in-suspend;
|
regulator-suspend-microvolt = <3300000>;
|
};
|
};
|
|
vcc_18: RK805_LDO1@4 {
|
regulator-compatible = "RK805_LDO1";
|
regulator-name = "vcc_18";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-on-in-suspend;
|
regulator-suspend-microvolt = <1800000>;
|
};
|
};
|
|
vcc_18emmc: RK805_LDO2@5 {
|
regulator-compatible = "RK805_LDO2";
|
regulator-name = "vcc_18emmc";
|
regulator-min-microvolt = <1800000>;
|
regulator-max-microvolt = <1800000>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-on-in-suspend;
|
regulator-suspend-microvolt = <1800000>;
|
};
|
};
|
|
vdd_10: RK805_LDO3@6 {
|
regulator-compatible = "RK805_LDO3";
|
regulator-name = "vdd_10";
|
regulator-min-microvolt = <1000000>;
|
regulator-max-microvolt = <1000000>;
|
regulator-boot-on;
|
regulator-always-on;
|
regulator-state-mem {
|
regulator-on-in-suspend;
|
regulator-suspend-microvolt = <1000000>;
|
};
|
};
|
};
|
};
|
|
cw201x: cw2015@62 {
|
compatible = "cw201x";
|
status = "okay";
|
reg = <0x62>;
|
bat_config_info = <0x15 0x42 0x60 0x59 0x52 0x58 0x4D 0x48
|
0x48 0x44 0x44 0x46 0x49 0x48 0x32 0x24
|
0x20 0x17 0x13 0x0F 0x19 0x3E 0x51 0x45
|
0x08 0x76 0x0B 0x85 0x0E 0x1C 0x2E 0x3E
|
0x4D 0x52 0x52 0x57 0x3D 0x1B 0x6A 0x2D
|
0x25 0x43 0x52 0x87 0x8F 0x91 0x94 0x52
|
0x82 0x8C 0x92 0x96 0xFF 0x7B 0xBB 0xCB
|
0x2F 0x7D 0x72 0xA5 0xB5 0xC1 0x46 0xAE>;
|
support_dc_adp = <1>;
|
dc_det_gpio = <88>;
|
dc_det_flag = <1>;
|
hw_id_check = <1>;
|
hw_id0_gpio = <86>;
|
hw_id1_gpio = <87>;
|
};
|
};
|
|
&cpu0 {
|
cpu-supply = <&vdd_arm>;
|
};
|
|
&pinctrl {
|
pmic {
|
pmic_int_l: pmic-int-l {
|
rockchip,pins = <1 12 RK_FUNC_GPIO &pcfg_pull_up>; /* gpio1_b4 */
|
};
|
};
|
|
sdio-pwrseq {
|
wifi_enable_h: wifi-enable-h {
|
rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
usb {
|
host_vbus_drv: host-vbus-drv {
|
rockchip,pins = <3 20 RK_FUNC_GPIO &pcfg_pull_none>;
|
};
|
};
|
|
keys {
|
pwr_key: pwr-key {
|
rockchip,pins = <3 23 RK_FUNC_GPIO &pcfg_pull_up>;
|
};
|
};
|
};
|
|
&dmc {
|
rockchip,pctl-timing = <0x96 0xC8 0x1F3 0xF 0x8000004D 0x4 0x4E 0x6 0x3
|
0x0 0x6 0x5 0xC 0x10 0x6 0x4 0x4
|
0x5 0x4 0x200 0x3 0xA 0x40 0x0 0x1
|
0x5 0x5 0x3 0xC 0x1E 0x100 0x0 0x4
|
0x0 0x924>;
|
rockchip,phy-timing = <0x220 0x1 0x0 0x0 0x0 0x4 0x60>;
|
rockchip,sdram-params = <0x428B188 0x0 0x21 0x472 0x15
|
0 300 3 0 120>;
|
};
|
|
&emmc {
|
status = "okay";
|
};
|
|
&uart2 {
|
status = "okay";
|
};
|
|
&u2phy0 {
|
status = "okay";
|
|
u2phy0_otg: otg-port {
|
status = "okay";
|
};
|
|
u2phy0_host: host-port {
|
status = "okay";
|
};
|
};
|
|
&usb20_otg {
|
status = "okay";
|
};
|
